• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.05a
• /
• pp.45-52
• /
• 2002

The tribological role of mass transfer layer was studied with silver coatings under various ranges of load and sliding speed. Silver coating was performed with a functionally gradient coating method. Tests were performed in dry sliding conditions, using a ball-on-disk contact configuration, at the load of 0.0196-17.64 N and the sliding speed of 20-1,000 mm/s in ambient air. Optical microscope and EPMA analyses showed that contact surfaces were covered with the mass transfer layers of agglomerated wear particles depending upon the contact conditions, and they greatly influenced the tribological characteristics of the surfaces. However, the formation of mass transfer layer was suppressed as the sliding speed increased, and above a critical sliding speed, no mass transfer layer was able to form. For building up a general framework of tribological behavior of the coated silver films, all test data were summarized on a map whose axes are contact pressure and sliding speed.

• KSBB Journal
• /
• v.13 no.2
• /
• pp.187-194
• /
• 1998

For mass production of polyhydroxyalkanoates (PHA), high cell density cultures of Alcaligenes eutrophus by fed-batch culture under phosphate-limitation condition has been investigated. PHA accumulation by the regulation by the regulation of initial phosphate concentration could be automatically induced, and high density cell culture above 200 g/L also could be successfully produced. The production of Poly-$\beta$-hydroxybutyrate (PHB) and dry cell weight increased with increasing the initial phosphate concentration. When the initial concentrations of phosphate were in the ranges of 1.5~4.5 g-PO$_4$/L, PHB and dry cell weight obtained were 83~266 g/L and 61~216 g/L, respectively, and PHB productivity was in the ranges of 1.35~3.10 g/L.h. When a mixture of glucose and propionic acid is used as carbon sources, poly(3-hydroxybutyrate-co-poly-3-hydroxyvalerate), P(3HB-co-3HV), could be also successfully produced under phosphate limitation condition. When the mole ratio of propionic acid to glucose in the feeding solution is 0.22, a final dry cell weight of 150 g/L and a P(3-HB-co-3HV) of 90 g/L were produced. Morphological changes and size distribution of PHB granules synthesized in A. eutrophus under phosphate-limitation condition are determined by TEM during the course of fed-batch. Mean granule diameters of PHB produced are in the range of 0.36~0.39 $\mu$m, and mean cell size was elongated from 0.54~0.59 $\mu$m$\times$ 1.3~1.5 $\mu$m to 0.83~0.89 $\mu$m $\times$2.0~2.3 $\mu$m. Phosphate concentration in media did not affect size distribution of PHB granule and cell.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.7
• /
• pp.17-28
• /
• 2017

This paper presents the investigation of dynamic behavior of a single pile in dry sand based on 1g shaking table tests. The natural frequency of soil-pile system was measured, and then a range of loading frequency was determined based on the natural frequency. Additionally, the studies were performed by controlling loading accelerations, pile head mass and connectivity conditions between pile and cap. Based on the results obtained, relatively larger pile head displacement and bending moment occur when the loading frequency is larger than the natural frequency of soil-pile system. However, the slope of the p-y curve is smaller in the similar loading frequency. Also, it was found that inertia force like input acceleration and pile head mass, and relation of the natural frequency of soil-pile system and input frequency have a great influence on the slope of dynamic p-y curve, while pile head conditions don't.

• KSBB Journal
• /
• v.11 no.2
• /
• pp.201-210
• /
• 1996

The production of polyhydroxyalkanoate(PHA) from glucose by batch and fed-batch culture of Pseudomonas sp. HJ was studied. In batch culture using fermentor, 400 rpm of agitalion speed, 2 vvm of aeration rate, 18 hours of inoculum age, and 5% (vlv) of inoculum size were optimal. PHA production was not increased by deficiency of oxygen. In a batch culture, the final call mass was $6.251g/\ell$, and PHA content was 20% of dry cell weight. In a constant feeding fed-batch culture, cell mass increased to $33.24g/\ell$, and PHA content reached 48.9% of dry cell weight. In an intermittent feeding fed-batch culture, cell mass increased to $37.89g/\ell$, and PHA content reached 53.5% of dty cell weight.

• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.267-274
• /
• 2017

Behavior of rock mass depend on the mechanical properties of intact rock and geometrical property of discontinuity distributed in rock mass. In case of rock slope, particularly, location of slope failure surface and behavior after failure are changed due to discontinuities. In this study, two 3D slope stability analysis methods were developed for two different failure types which are circular failure and planar failure, considering that failure type of rock slope is dependent on scale of discontinuity which was then applied to real rock slope to review the applicability. In case of circular failure, stable condition was maintained in natural dry condition, which however became unstable when the moisture content of the surface was increased by rainfall. In case of planar failure, rock slope become more unstable comparing to dry condition which is attributable to decrease in friction angle of discontinuity surface due to rainfall. Viewing analysis result above, analysis method proved to have well incorporated the phenomenon occurred on real slope from the analysis result, demonstrating its applicability to reviewing the slope stability as well as to maintaining the slope.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.2
• /
• pp.273-278
• /
• 2002

Two-step fed-batch fermentations were carried out to overproduce Bacillus licheniformis maltogenic amylase (BLMA) in recombinant Escherichia coli. The first step was to increase the cell mass by controlling the feeding of a glucose solution, while the second step was designed to improve the amylase expression efficiency by supplementing organic nitrogen sources. The linear gradient feeding method was successfully adopted to maintain the glucose concentration below 0.2 g/l during the fed-batch mode, as effectively minimizing acetic acid formation. When the dissolved oxygen (DO) level became limiting, an accumulation of acetic acid and drastic decrease in specific BLMA productivity were observed. Glucose and organic nitrogen sources consisting of yeast extract and casein hydrolysate were simultaneously supplied in the pH-stat mode to further increase the specific BLMA expression efficiency. An organic nitrogen source consisting of 200 g/1 yeast extract and 100 g/1 casein hydrolysate was found to be the best among the various combinations tested. The feeding of an organic nitrogen source in the second-step fed-batch period was highly beneficial in enhancing the BLMA production. The optimized two-step fed-batch culture resulted in 78 g/l maximum dry cell mass and 443 U/ml maximum BLMA activity, corresponding to 1.5-fold increase in the dry cell mass and 3.7-fold enhancement in BLMA production, compared with the simple fed-batch fermentation.

• Journal of Korean Medicine for Obesity Research
• /
• v.21 no.1
• /
• pp.32-41
• /
• 2021

Objectives: We aim to observe the relation of body mass index (BMI) and the indicators of oral health. Methods: 400 subjects participated in the study. The BMI values are calculated from the height and weight. For the tongue diagnosis, we used the tongue imaging device to analyze the color, tongue coating, and tooth marks. We measured the concentration of hydrogen sulfide (H₂S) and methyl mercaptan (CH₃SH) to evaluate the halitosis. The dry mouth was evaluated through the measurement of saliva secretion and with the questionnaire asking the frequency of dry mouth. Results: The BMI values were significantly higher in the group with light-white and blue-purple colored tongue, and significantly lower for lightly-coated tongue. However, the correlation of BMI and the amounts of saliva secretion was not significant as well as in the correlation of BMI and the concentration of H₂S, CH₃SH. In tongue diagnosis, the subjects who had blue-purple colored tongue also had significantly higher H₂S and CH₃SH, but tendency of lower saliva secretion. Conclusion: We obtain data showing that BMI value and the indicators of oral health including tongue diagnosis have meaningful correlation.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.2
• /
• pp.39-47
• /
• 2001

According to a series of batch-scale washing tests, SDS+$POE_5$ and $POE_5$+$POE_14$ were determined for the applicable mixed surfactants. Because SDS+$POE_5$ showed slightly negative effects on the microbes in the toxicity tests, $POE_5$+$POE_14$((1:1) 1%) was chosen for this study. In the in-situ flushing experiments, the removal rate of endosulfan was 67% for the injection rate of 1.5L/min/$\textrm{km}^2$. And when methanol and ethanol were added as cosolvent, 75% and 81% removal efficiencies were achieved, respectively. In the tests of bioremediation after the application of in-situ flushing, the removal rates of contaminated soils having 13mg/kg dry soil and 3mg/kg dry soil as initial concentrations were 86% and 81%, respectively. There were no significant degradation after 24 hours. The major rate-limiting factor for the biodegradation of endosulfan might be the mass transfer from soil phase to liquid phase after 24 hours. With the addition of surfactant, 89% removal was achieved after 120 hours. Because the surfactant improved the mass transfer rate, the biodegradation of endosulfan was enhanced. When surfactant and cosolvent were added together, the adaptation period of microorganisms to the surfactant became longer and the removal rates were 84% and 83% for methanol and ethanol, respectively.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.5
• /
• pp.487-493
• /
• 2011

Alpha fetoprotein(AFP), which is serological marker for hepatocellular carcinoma, was quantitatively measured by its normal concentration, 10 ng/ml, with a label-free piezoelectric microcantilever mass sensor. The principle of detection is based on changes in the resonant frequency of the piezoelectric microcantilever before and after target molecules are attached to it, and its resonant frequency is measured electrically using a conductance spectrum. The resonant frequency of the developed sensor is approximately 1.34 MHz and the mass sensitivity is approximately 175 Hz/pg. The sensor has high reliability as mass sensor by reducing the effect of surface stress on resonant frequency due to attached proteins. 'Dip and dry' technique was used to react the sensor with reagents for immobilizing AFP antibody on the sensor and detecting AFP antigen. The measured mass of the detected AFP antigen was 6.02 pg at the concentration of 10 ng/ml, and 10.67 pg at 50 ng/ml when the immunoreaction time was 10 min.

• The Korean Journal of Pesticide Science
• /
• v.2 no.2
• /
• pp.90-96
• /
• 1998

The purpose of this study is to investigate the liquid culture conditions for mass production of Metarhizium anisopliae var. majus ARS 978 which is a potential microbiological pesticide. The temperature and pH range for optimal cultivation were $28^{\circ}C$ and pH 7.0, respectively. For M. anisopliae ARS 978, 1.0 %(v/v) molasses, 1.0 %(w/v) distiller's dry solubles, and 0.3 %(w/v) $CaCO_{3}$ were found to be the proper nutrients, considering cell mass, enzyme activities and spore concentration.