• Applied Biological Chemistry
• /
• v.34 no.2
• /
• pp.117-124
• /
• 1991

Soybean plants inoculated with Bradyrhizobium japonicum MN 110 were supplied with nutrient solutions containing 1.0, 0.25 and 0.5.nM-P to characterize the effect of externaI-P supply on the phosphorus status of nodules and on the P-uptake system of isolated bacteroids from nodules. After 48 days of growth, whole plant dry mass in the 0.25 and 0.05 mM-P treatments decreased significantly. The Pi concentrations in nodules were 4.1, 2.5 and 2.0 mM for 1.0, 0.25 and 0.05 mM-P treatments, respectively. The external-P supply did not significantly affect the distribution of phosphorus among inorganic phosphate(Pi), soluble organic-phosphorus(SOP) and insoluble organic-phosphorus(TOP) fractions in nodules. The Pi concentrations in young leaves of 0.25 and 0.05 mM-P plants were 33% and 20% , respectively, of those in young leaves of 1.0 mM-P plants and Pi concentrations in old leaves were only 16% and 7%, respectively, of those in old leaves of 1.0 mM-P plants. Phosphorus deficiency decreased the percentage of total leaf phosphorus in the Pi fraction and increased the percentage of total leaf phosphorus in the IOP fraction. The bacteroid number ranged from 0.87 to $1.30{\times}10^{11}$ Per GFW nodule regardless of external-P supply to the host Plants and Plant age, The P-uptake rates were the same (15-16 pmoles /min./$10^8$ bacteroids) for the bacteroids isolated from nodules of 1.0 mM-P and 0.05 mM-P plants. These results indicate that Pi concentrations in nodules of phosphorus-deficient plants are sufficient for proliferation of bacteroids and that the P-uptake system of bacteroids is in a repressed state even when host plant growth is severely restricted by phosphorus-deficiency stress.

• International Journal of Highway Engineering
• /
• v.12 no.2
• /
• pp.71-79
• /
• 2010

The influence of fines of the frost susceptibility of subgrade soils were established by laboratory freezing system test simulating closely the thermal conditions in the field. During the winter season, the climate is heavily influenced by the cold and dry continental high pressure. Because of siberian air mass, the temperature of January is $-6{\sim}-7^{\circ}C$ on average. This chilly weather generate the frost heaving by freezing the moisture of soil and damage potential of the road structure. In the freezing soil, the ice lenses increase the freeze portion of soil by absorbing the ground water with capillary action. However, the capillary characteristics differ from the sort of soil on the state of freezing condition. In the current design codes for anti-freezing layer, the thickness of anti freezing layer is calculated by freezing depth against the temperature condition. Therefore, they have a tendency of over-design and uniform thickness without the considerations of thermal stability, bearing capacity and frost susceptibility of materials. So, it is essential for studying the appropriateness and bearing capacity besides the seasonal and mechanical properties of pavement materials to take a appropriate and reasonable design of the road structure. In this Paper, the evaluation of frost susceptibility was conducted by means of the mechanical property test and laboratory freezing system apparatus. The temperature, heaving amount, heaving pressure and unfrozen water contents of soil samples, the subgrade soils of highway construction site, were measured to determine the frost susceptibility.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.1
• /
• pp.18-25
• /
• 2008

Pseudomonas sp. PRGB06, a bacterial strain isolated from diamondback moth (Plutella xylostella) gut, was examined for its plant growth promotion and biofertilizing traits. The bacteria growth was observed under various conditions of carbon sources, temperature, pH and salt concentrations. In addition, the mechanisms of antagonism and phosphate solubilization were investigated. The bacterial strain PRGB06, grew well using most of the tested carbon sources. The best growth was observed at $30^{\circ}C$ and pH 7. The inhibition of the pathogenic fungi was likely due to the volatile antifungal metabolite and ammonia gas produced by the bacteria. A significant positive relationship was found between the phosphate solubilization and acid production. When inoculated with PRGB06 in vitro and in gnotobiotic condition, red pepper and maize showed increase in root length, seedling vigor and dry bio-mass.

• Korean Journal of Medicinal Crop Science
• /
• v.9 no.2
• /
• pp.108-115
• /
• 2001

The essential oils from the aerial parts of Tagetes minuta L. from two different locations in Korea were obtained by hydrodistillation in 0.52%(Goheung, Chonnam) and 0.48% yields(Puan, Chonbuk) as a dry weight base, respectively. A total of 69 components, accounting in 94.7% and 92.1% of the oil, respectively were identified by gas chromatography-mass spectrometric analysis and comparison of retention indices with those of authentic compounds. The main components in both samples(Goheung, Chonnam and Puan, Chonbuk) were limonene(5.83% and 6.41%, respectively), $cis-{\beta}-ocimene$ (4.87% and 47.73%), dihydrotagetone(14.78% and 52.83%), trans-tagetone(0.64% and 2.99%), cis-tagetone(1.13% and 2.50%), trans-tagetenone(1.15% and 11.45%) and cis-tagetenone(0.69% and 1.41 %). Although these components were present in both samples, the results showed large differences in the percentage composition of these components.

• Korean Journal of Microbiology
• /
• v.37 no.1
• /
• pp.92-99
• /
• 2001

High-cell-density cultivation of Ralstonia eutopha KHB 8862 by fed-batch fermentation in a 200 l pilot plant was carried out for the mass production of poly(3-hydroxybutyrate) (PHB). After 80 h of cultivation, the dry cell weight (DCW), PHB concentration, and PHB yield from fructose syrup reached 168 g/l, 74%DCW, and 0.27 (w/w), respectively, resulting in a productivity of 1.6 g of PHB/L/h. Based on these results, the PHB production cost from bacterial fermentation was analyzed and economic evaluation was performed. In the case of new investment being implemented or not, the production cost of PHB was US$ 3.15/kg and US$ 2.41/kg, respectively. PHB productivity and PHB yield on a carbon substrate were both important factors to be optimized. The increase of PHB yield on a carbon sources significantly decreased the PHB production cost but the increase in productivity had a relatively slight effect on the decrease in PHB production cost because the cost of carbon sources (37%) for PHB was larger in proportion to total cost than the depreciation cost (17%). These results suggest that the increased PHB yield from carbon sources and the development of new cheaper substrates would be more effective in decreasing PHB production cost than the increase in productivity. It was demonstrated that PHB is not in competition with consumable plastics such as PET in present market. Therefore, it is essential to lower production cost to be used as a bulk product and desirable to develop new application fields for PHB such as biomedical and cosmeceuticals.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.27 no.2
• /
• pp.129-136
• /
• 2007

To investigate the effect of large patch infection on oxidative stress induction, growth, $H_2O_2$ concentration and lipid peroxidation were compared between pathogen-infected and healthy (control) zoysiagrass. The sampling for leaves and roots were carried out every 2 days for a period of 6 days. Pathogen-infection increased root mortality by 30% compared to control. Dry mass was not significantly affected by pathogen-infection until day 4, but significant decreases in both leaves (-14%) and roots (-20%) were observed at day 6. The $H_2O_2$ concentration in pathogen-infected leaves rapidly increased within the first 2 days(+28%) and then slightly decreased. The increase of $H_2O_2$ in pathogen-infected roots was distinct, showing 1.7-fold higher level than control at day 6. The extent of lipid peroxidation caused by pathogen-infection continuously increased for the first 4 days. This was then stagnated until day 6. In roots, the significant increase of lipid peroxidation was observed only at day 2. These results indicate that large patch-infection induces oxidative stress, and that the oxidative stress responsive pattern was plant organ specific.

• Clean Technology
• /
• v.26 no.2
• /
• pp.96-101
• /
• 2020

In this paper, the commercial feasibility of trigeneration, producing heat, power, and hydrogen (CHHP) and using biogas derived from macroalgae (i.e., seaweed biomass feedstock), are investigated. For this purpose, a commercial scale trigeneration process, consisting of three MW solid oxide fuel cells (SOFCs), gas turbine, and organic Rankine cycle, is designed conceptually and simulated using Aspen plus, a commercial process simulator. To produce hydrogen, a solid oxide fuel cell system is re-designed by the removal of after-burner and the addition of a water-gas shift reactor. The cost of each unit operation equipment in the process is estimated through the calculated heat and mass balances from simulation, with the techno-economic analysis following through. The designed CHHP process produces 2.3 MW of net power and 50 kg hr^-1 of hydrogen with an efficiency of 37% using 2 ton hr^-1 of biogas from 3.47 ton hr^-1 (dry basis) of brown algae as feedstock. Based on these results, a realistic scenario is evaluated economically and the breakeven electricity selling price (BESP) is calculated. The calculated BESP is ¢10.45 kWh^-1, which is comparable to or better than the conventional power generation. This means that the CHHP process based on SOFC can be a viable alternative when the technical targets on SOFC are reached.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.2
• /
• pp.138-144
• /
• 2005

This study was carried out to investigate the changes of nitrifying bacterial populations including Nitrosomonas sp. and Nitrobacter sp. in $A^2/O$ pilot plant with the configuration of anaerobic-anoxic-oxic reactors. The suspended nitrifying bacterial populations in mixed liquor and those of attached populations on granular carrier surface made by molded waste tire were analyzed by Fluorescent in situ Hybridization(FISH) method. The nitrification rate of a pilot plant showed the value of $1.97{\sim}2.98\;mg\;N/g$ MLVSS hr. The ratios of suspended ammonia oxidizer including Nitrosomonas sp. (NSO) to total bacteria in each reactor were oxic < anoxic < anaerobic. On the contrary, the ratios of suspended nitrite oxidizer including Nitrobacter sp. (NIT) were anaerobic < anoxic < oxic. The thickness, dry density and mass of the attached biomass on granular carriers were $180{\sim}188\;{\mu}m$, $38.5{\sim}43.9\;mg/cm^3$, $29.4{\sim}32.5\;mg/g$, respectively. Also, the ratios of attached nitrifier to total bacteria on granular carriers were similar regardless of ammonia/nitrite-oxidizer (NSO; 3.2%, NIT; 2.8%) and very low compared to those(NSO; $22.8{\sim}28.4%$, NIT; $17{\sim}26%$) of suspended nitrifier.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.2
• /
• pp.141-148
• /
• 2010

Feasibility of floating aquatic plants (Eichhornia crassipes and Water dropwort) was investigated in order to control of sewage depending on various initial loading in a lab scale test. In addition, field test was conducted to assess the uptake rate of nutrient by E. crassipes. Lab-scale test applying primary domestic effluent operated at 4 day HRT shows that the highest uptake rates were 1.06 g N/$m^2{\cdot}day$ and 0.39 g P/$m^2{\cdot}day$ in the E. crassipes reactor. BOD removal efficiency in E. crassipes reactor was as high as 80% when the loading value was lower than 185 kg BOD/$ha{\cdot}day$. While 70 ~ 80% removal efficiency of BOD was achieved when the loading value was lower 80 kg BOD/$ha{\cdot}day$ at the W. Dropwort reactor. Experiment results show that E.crassipes has a higher nutrients removal efficiency than W. dropwort under high pollutant loading. Input loadings of TN and TP should not exceed to 10 kg TN/$ha{\cdot}day$ and 2.0 kg TP/$ha{\cdot}day$ respectively to provide a 50% TN and 80% TP removal efficiencies using E. crassipes. The field test demonstrated that an annual yield of E. crassipes mass was estimated as a fresh weight of 30.9 $m^3/ha{\cdot}yr$. E. crassipes grown in field pads absorbed 76.7 kg N/$ha{\cdot}yr$ and 13.4 kg P/$ha{\cdot}yr$ as a dry weight.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.19 no.6
• /
• pp.617-624
• /
• 1990

Proper processing condition of Yukwa(oil popped rice snack) for mass production and pop-ping mechanism of it were tested with Shinsun (waxy, Japonica type rice) which was excellent for Yukwa making. Optimum steaming time of dough was 15 min among 4 to 60 min and reasonable moisture content of the dough before steaming was 4895 among 48 to 53% which had good and fine texture. Acceptable stirring time of steamed dough was not significantly different among 1 to 4 min, but no stirring with much larger volume was shown very poor and too soft in texture. At the simplification test of milling method, wet milling was better then dry milling in expansion rate and high temperature treatment of dough at 6$0^{\circ}C$ gave negative effect on their quality. Extending high temperature treatment of dough, reducing sugars in the dough increased and it might be caused of starch degradation. In addition of some other protein sources to dough, Yukwa quality were in proportion to the protein content of the beans. At the long term storage of the Yukwa base, moisture absorption was different depending upon RH of atmosphere and the quality of Yukwa was inferior by storage time. By addition of some alcoholic beverage, such as Makkoli, Soju and Chungju, expansion rate and their texture were somewhat improved by increasing addition amount of them from 15% to. 30％ on dough (w/w).