• Journal of The Korean Society of Grassland and Forage Science
• /
• v.15 no.4
• /
• pp.274-278
• /
• 1995

This experiment was conducted to know what does the cutting date have an effect on the chemical composition and nutritive yield of Miscanthus sinensis, in order to determine the optimum cutting date of the plant when it is utilized as roughage. Miscanthus sinensis growing natively in the summit of Sam Ak mountain(550m above sea level) was cut at 10 days intervals from 25 July to 15 October, 1988. Plant length and dry matter contents were generally increased with delayed cutting date. Crude protein contents of the plant cut on 5, 15, and 25 of September were 5.5, 5.2 and 5.1%, respectively. Cmde fiber contents was similar with cutting treatment and averaged 35.6%. Cmde protein yield was higher in September than in other cutting date. Yield of crude fiber were 8.3, 9.3 and 9.3t/ha on 5, 15 and 25 September, respectively. Ratio of Cmde protein yield to Crude fiber yield on 5 September tended to be higher than on 15 September and 25 September. These results suggest that the optimum cutting date of the Miscanthus sinensis for good quality forage seems early September.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.1 no.1
• /
• pp.10-17
• /
• 1978

The experiment were carried out to determine the rate of regrowth, the changes of carbohydrates contained in the samples right after cutting, plant part for storage of carbohydtates and top-dressing time of ladino clover and orchardgrass. Plants were grown in the simple growth chamber as well as in the fields. The temperature, light intensity and light period were controlled to be 15-20$^{\circ}$, 4,250 Lux, and 15 hours in the simple growth chamber. The results obtained are as follows ; 1. The period of recovery to initial stands after cutting was about 3 weeks in ladino clover and 4-5 weeks in orchard grass in terms of dry matter and carbohydrates. 2. The content of total water-soluble carbohydrates of plant parts was the hightest in stolon of ladino clover and in sheath of orchardgrass, and the lowest in roots of ladino clover and orchardgrass. 3. Cutting resulted in a temporary decrease of total water-soluble carbohydrates in the shoots. Similar trends were observed when the plants were left intact with top-dressing. 4. The top-dressing applied simultalliousely with the cutting was more effective to stimu1ate regrowth than that applied after cutting, however, both of the simultaneous and after cutting application were still better than application prior to cutting.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.3
• /
• pp.241-246
• /
• 1996

This Experiment was conducted to know effect of cutting times and nitrogen split application rates on shoot and root-related characters of Atractylodes japonica. The cutting time was forced on none, once and twice along with three levels of nitrogen split application, all basic 50 -30 -20% and 40 -30 -30%. The plant height declined with increased cutting time and dry matter weight was increased with nitrogen split application under none and once cutting. Average yield of cutted shoot as edible wild plant was 257kg/10a at once cutting condition, but twice cutting condition was little and unfavorable to use edible wild plant because shoot was coarse. Yield 0 dry rhizome was the highest at once shoot cutting und­er 50 -30 -20% nitrogen split application by 471kg/10a.Especially, culture of Atractylodes japonka needed once shoot cutting one the 10th-30th of May.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.1
• /
• pp.20-25
• /
• 1988

This experiment was conducted to find out the effects of the different cutting height on the chemical composition, energy production and relation of yields of Italian ryegrass, tall fescue and perennial ryegrass swards. It was carried out on the experimental field of Livestock Experiment Station, in Suweon, from Sept. 1986 to May 1987. The results obtained are summarized as follows: 1. Chemical composition and Van Soest fiber contents were slightly different among grasses. But were not same trend with cutting heights. At the late vegetative stage, crude protein and crude fiber content were much more in tall fescue, Ash in perennial ryegrass, E.E. and NFE in Italian ryegrass respectively. NDF, ADF, Hemicellulose, Lignin, Cellulose and Silica contents were much more in tall fescue than the others. 2. DM, DCP, TDN, StE, ME and NEL productions were appeared to high in line with Italian ryegrass, perennial ryegrass and tall fescue. In addition 6 cm cutting height was the most production in Italian ryegrass, 15 cm cutting height was the most production in perennial ryegrass and tall fescue. 3. The much more content of crude protein, the less nonstructural carbohydrate content. The less content of NDF, the much more nonstructural carbohydrate content. Green and dry matter yield before wintering were not influence the green and dry matter yield of the late vegetative stage, but green yield before wintering influenced total green yield.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.11 no.3
• /
• pp.182-188
• /
• 1991

With a purpose of finding out the effects of cattle slurry applicatioin on the dry matter yield, yield component, and botanical composition in the mixed sward, a field experiment was conducted with two times and five levels of cattle slurry application. The experimental field was laid.out in a split-plot design with three replications, and lasted from September. 1986 to October, 1990 at the Livestock Experiment Station in Suweon, The results obtained are summarized as follows: 1. At each harvest time, the plant growth of the plots with cattle slurry application was slightly worse when compared to dressing of mineral fertilizer. 2. Average dry matter yield for 4 years was not significantly different between the slurry application times, just after cutting, and 15 days after cutting, The DM yield in the plot with cattle slurry 30 m!/ha and mineral fertilizer(9,095 kg/ha) and with cattle slurry 60 m1/ha and mineral fertilizer(8, 987 kg/ha) were decreased by 8% and 10% than that of the plot with mineral fertilizer application(9,937 kg/ha), respectively. 3. The DM yield component of the plots with cattle slurry application just after cutting was much better when compared to manuring 15 days after cutting. And it was much better in the plot with cattle slurry 60 m"/ha and mineral fertilizer which was composed of 73.8% grasses(6.636 kg/ha). 24.6% legumes (2,207 kdha) and 1.6% weeds(144 kdha). 4. In general, the botanical composition was relatively good in the plots with slurry application just after cutting. Grassland vegetation of the plots with cattle slurry 60 m"/ha and mineral fertilizer was changed into much better botanical composition with 66.8% grasses, 30.2% legumes and 3. 1% weeds at the end of the experiment.xperiment.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.43 no.3
• /
• pp.129-137
• /
• 2023

Corn silage is extensively utilized in ruminant feeding on a global scale, with substantial research efforts directed towards enhancing its nutritional worth and managing moisture content. The purpose of this study was to assess the impact of normal cutting height and elevated cutting height on whole-crop corn silage. Corn was harvested at heights of 15 cm and 45 cm above the ground, respectively, 45 days after heading. The harvested corn was cut into 2-3 cm lengths and packed into 20-liter plastic silos in triplicate. The results showed that dry matter (DM), crude protein (CP), water soluble carbohydrates (WSC), and in vitro dry matter digestibility (IVDMD) of C45 were significantly higher than those of the control, while the neutral detergent fiber (NDF) was significantly lower in C45 (p<0.05). The C15 had higher yields than C45 (p<0.05). There was no significant difference in the total digestible nutrients (TDN) yield of whole-crop corn silage. The increase in cutting height resulted in a larger change in moisture content and NDF per centimeter. After 60 days-ensiling, C45 showed significantly lower NH₃-N concentrations. Moreover, C45 had significantly higher lactic acid concentration, lactic acid/acetic acid ratio, and lactic acid bacteria count compared to the control. Mold was not detected and the yeast count was less than 2 log10 cfu/g fresh matter in both control and C45. In summary, C45 improved the feeding value and fermentation quality of whole-crop corn silage at the expense of forage productivity.

• Advances in materials Research
• /
• v.9 no.3
• /
• pp.189-202
• /
• 2020

The objective of the present work is to investigate the effect of cutting parameters (Vc, fz and ap) on tool life and the level of vibrations velocity in the machined part during face milling operation of hardened AISI 52100 steel. Dry-face milling has been achieved in the annealed (28 HRc) and quenched (55 HRc) conditions using multi-layer coating micro-grain carbide inserts. Statistical analysis based on the Response surface methodology (RSM) and ANOVA analysis have been conducted through a plan of experiments methodology using a reduced Taguchi table (L9) in order to obtain engineering models for tool life and vibration velocity in the workpiece for both heat treatment conditions. The results show that the cutting speed has a dominant influence on tool life for both soft and hard part. Cutting speed and feed per tooth is the most significant parameters for vibration levels. Comparing the experimental values with those predicted by the developed engineering models of tool life and levels of vibrations velocity, a good correlation has been obtained (between 97% and 99%) in annealed and hard conditions.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.18 no.3
• /
• pp.205-216
• /
• 1998

In order to investigate the short-term effect of cattle slurry N application on dry matter yield of reed canarygrass(Phalaris arundinacea L.) in uncultivated rice paddy during the harvested years in 1993~1995. Annual cattle slurry N was applied at the levels of 0, 90, 180, 270 and 360 kg $ha^{-1}$ in 3 cuttings, 0, 120, 240, 360 and 480 kg $ha^{-1}$ in 4 cuttings, and 0, 150, 300, 450 and 600 kg $ha^{-1}$ in 5 cutting, respectively. The results were summarized as follows; 1. The dry matter yields of all cutting frequencies in 1993 were higher than in other harvested years. 2. Significantly higher dry matter yields were obtained as 13.10 tons $ha^{-1}$ at level of 360 kg $ha^{-1}\;yr^{-1}$ in 3 cuttings, 12.50-12.83 tons $ha^{-1}$ at levels of 360-480kg $ha^{-1}\;yr^{-1}$ in 4 cuttings, and 12.52-12.56 tons $ha^{-1}$at levels of 450-600 kg $ha^{-1}$ $yr^{-1}$in 5 cuttings, respectively. 3. Efficiency of dry matter production(kg DM $kg^{-1}$ N) to cattle slurry N application tended to decrease with higher levels of cattle slurry N application and cutting frequencies. Higher efficiencies of dry matter production to cattle slurry N application were obtained as 15.2 kg at N level of 90 kg $ha^{-1}\;yr^{-1}$in 3 cuttings, 19.8 kg at level of 120 kg $ha^{-1}\;yr^{-1}$ in 4 cuttings, and 10.0 kg at level of 150 kg $ha^{-1}\;yr^{-1}$ in 5 cuttings, respectively. 4. The highest relative yields(RY) in different cutting frequency were 38.1% for 2nd cut in 3 cuttings, 41.8% for 3rd cut in 4 cuttings, and 30.1% for 4th cut in 5 cuttings, respectively. 5. The estimated ranges of marginal dry matter yield(Ymar.) were 11.5~12.1 tons $ha^{-1}$ at the ranges of economic N level of 261.0~304.6 kg $ha^{-1}\;$yr^{-1}$ in 3 cuttings, 10.4~11.5 tons $ha^{-1}$ at the ranges of economic N level of 205~302.9 kg $ha^{-1}\;yr^{-1}$ in 4 cuttings, and 11.1~11.6 tons $ha^{-1}$ at the ranges of economic N level of 303.8~354.4 kg $ha^{-1}$ 5 cuttings, respectively. 6. Ranges of economic slurry N level(Necon.) in all cuts were 67.9~95.0 kg $ha^{-1}$ in 3 cuttings, 14.3~119.8 kg $ha^{-1}$in 4 cuttings, and 50.9-125.2 kg $ha^{-1}$ in 5 cutting, respectively. 7. The 3 cuttings per annum was a proper cutting frequency for the increase in dry matter production of reed canarygrass using uncultivated rice paddy.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.3 no.2
• /
• pp.58-66
• /
• 1983

This experiment was carried out to investigate the effects of the nitrogen rates and cutting heights on the appearance dry weight and death of new bud (branch and tiller) of sorghum-sudangrass hybrid (Sorghum bicolor (L.) Moench). The cultivar used in the present study was Pioneer 988. The experiment was arranged as a split plot design and undertaken in the Experimental Livestock Farm of Agriculture Coll., Seoul Nat'l Univ. in Suweon, 1981 and 1982. The results obtained are summarized as follows: 1. The appearance and death of branch and tiller were not influenced with high nitrogen fertilization. 2. The frequency of the branching was decreased as the low stubble height, and the rate of the tillering was decreased in the high stubble height. 3. The yield of forage mostly depended on the tiller regardless of cutting height, and minor portion of the yield was resulted from the branch. 4. The low cutting height resulted in the increased number of dead bud (p<0.05).

• Journal of Korean Society of Forest Science
• /
• v.89 no.4
• /
• pp.497-501
• /
• 2000

Twelve-year-old rootstocks of sycamore and sweetgum were coppiced at monthly intervals for one year. Sprout growth was measured three and five years after cutting. After three years, average dry weight of the sprouts cut in May, June and July was lower by 36% for sycamore and by 24% for sweetgum than those cut during the other months of the year. However, these differences were reduced to be 23% and 14%, respectively, after five years.