• Journal of the Korean Ceramic Society
• /
• v.30 no.5
• /
• pp.420-426
• /
• 1993

The machinability of ceramics has been experimentally studied. The experiments were conducted on alumina cernmics of various purity, quartz, and cordierite using the sintered diamond tools and CBN tools. Tool wasre, surface roughness, and cutting resistence were measured and analysed. It was found that the workpieces could be machined with the diamond and CBN tools, but the sintered diamond tools were more efficient for the machining of the high strength ceramics. The machining of alumina ceramics with sintered diamond tools showed that (1) wet machining prolonged tool life comparing with dry machining, (2) workpiecewith higher purity had better surface roughness, (3) severe cutting conditions led to the chipping and fracture of tool and increase of the surface roughness and cutting resistance, (4) 20~40m/min of cutting speed, 0.01~0.02mm/rev of feed, and 0.1~0.2mm of cutting depth are suggested as proper cutting conditions for the high strength ceramics.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.1
• /
• pp.121-133
• /
• 2020

Underwater cutting has a different mechanism than dry cutting, and there are more restrictions than benefits. Due to these constraints, research and development of underwater cutting has been very limited. At present, reactor dismantling is emerging as an important task worldwide, and reactor pressure containers, a key part of the reactor, are decommissioned based on underwater cutting. Reactor pressure containers are high-level radioactive waste, which is one of the main goals of today, such as to bridge the gap between environmental, safety, and cutting performance; hence, a process suitable for cutting should be applied. Therefore, many studies are being conducted on underwater cutting in connection with the dismantling of nuclear reactors in various areas in order to find appropriate processes. This paper first introduces the core technology of underwater cutting processes and discusses various processes. The emphasis is then placed on the adequacy of the reactor dismantling application. More specifically, we examine the suitability for the mechanical and thermal cutting processes, respectively, to find a solution suitable for dismantling a reactor. We discuss how each solution can sufficiently perform the specified functions at each stage of reactor dismantling and suggest that these processes can perform all of the work of underwater cutting.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.15 no.2
• /
• pp.124-131
• /
• 1995

In order to find out optimum seed production date according to different defoliation and flooding period of Italian ryegrass, this studies with Tetrone were canied out on the experimental field of Honam Crop Experiment Station from 1986 to 1988. Treatments included cutting date of Nov. 20 and Apr. 10 and flooding period of 5-25 days. In soil after experiment, organic matter, phosphate and silicate content increased, but potassium content decreased 0.16% than that before experiment. Heading and maturing date of Nov. 20 cutting were same with those of non cutting, those of Apr. 10 cutting lates 6 days to heading date and 2 days to maturing date. Plant height and culm length of Nov. 20 cutting were sirniller to those of non cutting, those of Apr. 10 cutting were shorter and panicle length have no difference between non cutting and cutting. Lodging of cutting treatment was reduced than that of non cutting. Lodgin was increased as flooding period was long, also loding of all treatment occured at 30 days after heading. Two cutting times of Nov. 20 and Apr. 10 have the most fresh yield, while non cutting have the most dry matter yield. Optimun seed productin date was considered to suitable when 35 days after heading (Jun. 14), at this time, seed production was 1,640 to 2,640 kg/ha. Also if flooding j u r y have, seed production was good between 10 days and 15 days after flooding.

• Journal of Wetlands Research
• /
• v.7 no.2
• /
• pp.145-158
• /
• 2005

To clarify the growth of Phragmites communis along the distance from the land, and investigate the effects by cutting the aboveground part, the height and dry weight of this species were surveyed from 2000 to 2001 on natural stands at tidal-flat of Hogog-ri, Jugog-myeon, Whaseong-city, Gyeonggi Province. At the stand near the rice paddy, mean density, mean height, dry weight per plant and dry weight per unit area of P. communis were $122.67plants/m^2$, 100.36 cm, 4.241 g, and $537.574/m^2$, respectively. The sizes of P. communis conspicuously increased from seaside to land side. At the stand isolated from the land, these properties were $102.30plants/m^2$ (in density), 43.894 cm (in height), 0.779 g/plant and $73.495g/m^2$, respectively, and the sizes of P. communis at the land side were relatively similar to those at sea side. The cutting of aboveground part resulted to the decrease of density and dry weight per unit area in next year, but did not influence on the height and weight per plant of P. communis.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.6 no.2
• /
• pp.103-110
• /
• 1986

The experiments were carried out to study the influence of meteorological factors and cutting management on dry matter accumulation and net energy value in orchardgrass (Dactlylis glomerata L.) cv. Potomac and Baraula, perennial ryegrass (Lolium perenne L.) cv. Reveille and Semperweide and meadow fescue (Festuca pratensis Huds.) cv. Cosmos 11 and N.F.G.. The field trials were designed as a split plot design with three cutting regimes of 6-7 cuts at grazing stage, 4-5 cuts at silage stage and 3 cuts at hat stage in Korea and West Germany from 1975 to 1979. The results obtained are summarized as follows: 1. Productivity of orchardgrass, perennial ryegrass and meadow fescue were mainly affected by cutting systems and meteorological factors, especially air temperature, rainfalls, solar radiation and their interactions. In West Germany, cutting frequency was to be found asan most important factor influenced to dry matter yield and net energy value. 2. Orchardgrass, taken as average of all experimental sites in Korea, produced high yield of 875 kg/10 a in dry matter, which was as much as 32% and 27% higher than those of perennial ryegrass and meadow fescue, respectively. The annual dry matter yields of orchardgrass from 1976 to 1977 were shown a little variation. Dry matter yields in Freising and Braunschweig in West Germany were increased in all grass species continuously. 3. Orchardgrass, perennial ryegrass and meadow fescue showed different response to cutting frequency. The highest dry matter yields were found under 3 cuts at hay stage for orchardgrass and 4-5 cuts at silage stage for perennial ryegrass and meadow fescue. In West Germany, dry matter yields, as average of all grass species under different cutting systems, were 1326 kg, 1175 kg and 1098 kg/10a for 3 cuts, 4-5 cuts and 6-7 cuts, respectively. 4. Chemical composition and net energy concentration of temperate grasses were influenced by cutting managements. The highest yields of digestible crude protein were obtained under 6-7 cuts at grazing stage both in Korea and West Germany. In net energy yields, 3 cutting system produced the highest yield with 694 (orchardgrass), 665 (perennial ryegrass) an 623 kStE/10 a (meadow fescue). However, frequent cutting at grazing and silage stage produced higher yields than 3 cuts at hay stage in Cheju, Suweon and Taekwalyong.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.22 no.4
• /
• pp.287-296
• /
• 2002

A field trial was conducted from May to November 2000 at four regions of Jeju province(Jeju, Seogwipo, Susan Seongsan and Keumak Hallim) to estimate adaptation, dry matter yield and nutrient value of kenafs(Everglades 41 and China Choung-pi 3) and a sorghum-sudangrass hybrid(Pioneer 947). Total dry matter(DM) yields of sorghum-sudangrass hybrid Pioneer 947, kenaf Everglades 41 and kenaf China Chong-pi 3 were 7,313, 4,653 and 5,238 kg/ha(P<0.05), respectively, kenaf China Chong-pi 3 being the highest. The region specific dry matter(DM) yields of Jeju, Seogwipo, Seongsan and Hallim area were 5,040, 5,663, 7,283 and 4,950kg/ha, respectively, showing that Seogwipo was the highest. Average DM yields of two kenaf varieties were 4,946, and 3,246 kg/ha for 1st time-cutting and 2nd time-cutting, respectively. The average dry matter(DM) yield of kenaf was significantly higher in the 1st time-cutting than the 2nd time. No significant difference in neutral detergent fiber(NDF) and acid detergent fiber(ADF) contents was found among three varieties. The average crude protein(CP) content of kenaf was higher than that of sorghum-sudangrass hybrid(P<0.05) and was higher in 2nd time-cutting than in 1st time-cutting(P<0.05). There were no significant difference in the heavy metal content of soil either between the sorghum hybrid and kenafs or between two kenaf varieties. In conclusion, the average dry matter(DM) yield of kenaf was lower than that of sorghum hybrid, Contrarily the crude protein(CP) content of kenafs was higher than that of the sorghum hybrid. The average dry matter(DM) yield of kenaf showed higher in 1st time-cutting than 2nd time-cutting, while the crude protein(CP) content of kenafs decreased with time.

• Korean Journal of Agricultural Science
• /
• v.43 no.2
• /
• pp.240-248
• /
• 2016

Radish is a common vegetable consumed in Korea, Japan, and China. Radish Breeding has been conducted based on morphological properties, such as shape and color. Recently, physicochemical properties of radish are attracting more attention from breeders to develop cultivars for the retail market. In this study, major components of radish were determined and their relationship with textural property analyzed. Sixty-six radish cultivars were selected and divided into white head (WH) and green head (GH) according to their head color. The cutting forces of GH and WH groups were $2.17{\pm}0.34kg$ and $2.31{\pm}0.36kg$, respectively (P > 0.05). The starch contents of GH and WH were $3.75{\pm}0.39g\;per\;100g$ (dry basis) and $4.24{\pm}0.62g$, respectively. Cellulose contents in both groups were similar at 12.3-12.4 g per 100 g (dry basis). Pearson correlation coefficients between cutting force, cellulose content, and starch content ranged from -0.33-0.326 which does not demonstrate any strong correlation between these components. Therefore, no relationship was found between the cutting force and the starch content or the cellulose content for the cultivars analyzed in this study. As the first intensive study on the texture and the major components of radish, these results could provide valuable information for radish breeding if further studies on taste and nutrient components are conducted.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.1
• /
• pp.26-32
• /
• 1988

This study was conducted to determine the effects of cutting frequency and cutting height on agronomic characteristics and yield performance of sorghum-sudangrass hybrid, cv. Pioneer 855 F on the experimental field of Livestock Experiment Station, Suweon. The results are summarized as follows: 1. The relative contribution of leaf component to total yield was higher when the plants were cut frequently rather than when defoliated only a few times, and tend to be higher with high cutting. 2. Leaf Area Index (LAI) was the highest at the primary growth of two cutting times scheme and the first regrowth for three or four cutting times a year, but LAI, in general, was not related to cutting height. 3. Crop Growth Rate was the heighest at the first regrowth-plants grown in summer, and it was also related to the amount of stubble left at the previous cut. 4. Dead stubbles were not occurred when plants were cut before heading, but those were accompanied by the frequent and low cutting. 5. Total fresh fodder and dry matter yield were the highest at two times cut a year, and decreased with frequent cutting. The optimum cutting height at two times cut was ca. lOCm height stubble from the ground level, but yield increased with higher level cutting at the three or four times cut a year.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.409-412
• /
• 2004

In this paper, an integrated automation system of pattern design and $CO_2$ laser cutting for diving suits is presented. Pattern design includes grading which creates a full-size range from a base pattern. Tool path for laser cutting from the patterns is generated in G-code format. $CO_2$ Laser cutting machine is developed to help cut the patterns with accuracy and speed. Aluminum profiles, ball screws, and stepping motors are engaged into the machine as frame structure, transfer unit, and driving devices respectively. The developed system is tested in dry suit cutting, convincing it can be readily introduced in driving suits manufacturing with respect to cost and efficiency.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.10a
• /
• pp.64-74
• /
• 1996

The meachanism for cutting epoxy resins specimens which were specially provided was experimentally investigated to obtain a fine surface finish. the specimens were cut the three-dimensional undrer dry conditions using a lathe. the relationship between the topography of the cut surface due to the change rate of temperature of the cutting condition using sintered carbides (P20, K10, KT150) was investigated. the main results obtained are as follows: 1) The change rate of temperature of the cutting edge is increased in nearly proportion ot cutting speed feed rate depth of cut. 2)The profile of surface roughness were regulated k10 but irregulated P20 KT150. 3) The surface roughness value decreased K10 rather than P20 KT150. 3) The surface roughness value decreased K10 rather than P20 KT 150.4)The cutting resistance increased thrust force rather than cutting force due to the visco-elastic material of epoxy resins.