• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.133-139
• /
• 2008

In this paper, the feasibility for producing a plastic optical fiber sensor to be used as an anti-drowsy driving sensor is discussed. This sensor consists of a plastic optical fiber wound on the steering wheel covered by soft material. When a driver hold a steering wheel, the gripping force is induced and causes to the bend of the plastic optical fiber which decreases the power of light propagated inside the plastic fiber. The experimental results show that the detected optical power decrease as the gripping force increase and that this sensor can be used as the anti-drowsy driving sensor.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.447-450
• /
• 2013

This paper proposes the way to prevent drowsy driving by recognizing drivers eyes and yawn using a front camera. The method uses the Viola-Jones algorithm to detect eyes area and mouth area from detection face region. In the eyes area, it uses the Hough transform to recognize eye circle in order to distinguish drowsy driving. In the mouth area, it determines whether for the driver to yawn through a sub-window testing by applying a HSV-filter and detecting skin color of the tongue. The test result shows that the recognition rate of yawn reaches up to 90%. It is expected that the method introduced in this paper might contribute to reduce the number of drowsy driving accidents.

• Journal of Korean Society of Transportation
• /
• v.35 no.5
• /
• pp.423-433
• /
• 2017

During recent 5 years, it was recorded that 20% of total accident frequency and 30% of total number of death have been occurred due to drowsy driving. Drowsy driving accident is result from the loss of driving ability due to driver's accumulated fatigue. Continuous driving time can be measured as a surrogate variable to quantify the level of fatigue. The main purpose of this research is to investigate statistical correlation between the proportion of continuous driving vehicle (more than 2 hours) and the number of drowsy accidents. To carry this out, continuous driving time was measured using GPS route-guidance trajectory data. Also, accident frequency, traffic volume and segment length were collected to estimate safety performance function (SPF) for Jungbunearuk expressway in Korea. Through various types of estimated SPFs, statistical correlation was analyzed based on estimated statistical indices. This research can provide theoretical background for enforcement to regulate commercial vehicle driver's continuous driving time. In addition, throughout the trajectory data expansion, it is expected that strategy for anti-drowsy driving facilities installation can be established based on the suggested methodology.

• Journal of Korea Multimedia Society
• /
• v.19 no.6
• /
• pp.1024-1033
• /
• 2016

In this study, a system is proposed for analyzing whether driver's eyes are open or closed on the basis of images to determine driver's drowsiness. The proposed system converts eye areas detected by a camera to a color space area to effectively detect eyes in a dark situation, for example, tunnels, and a bright situation due to a backlight. In addition, the system used a thickness distribution of a detected eye area as a feature value to analyze whether eyes are open or closed through the Support Vector Machine(SVM), representing 90.09% of accuracy. In the experiment for the images of driver wearing glasses, 83.83% of accuracy was obtained. In addition, in a comparative experiment with the existing PCA method by using Eigen-eye and Pupil Measuring System the detection rate is shown improved. After the experiment, driver's drowsiness was identified accurately by using the method of summing up the state of driver's eyes open and closes over time and the method of detecting driver's eyes that continue to be closed to examine drowsy driving.

• Safety and Health at Work
• /
• v.7 no.1
• /
• pp.38-42
• /
• 2016

Background: Truck driving is known as one of the occupations with the highest accident rate. This study investigates the characteristics of traffic collisions according to road types (expressway and rural road). Methods: Classifying 267 accidents into expressway and rural road, we analyzed them based on driver characteristics (age, working experience, size of employment), time characteristics (day of accident, time, weather), and accident characteristics (accident causes, accident locations, accident types, driving conditions). Results: When we compared the accidents by road conditions, no differences were found between the driver characteristics. However, from the accident characteristics, the injured person distributions were different by the road conditions. In particular, driving while drowsy is shown to be highly related with the accident characteristics. Conclusion: This study can be used as a guideline and a base line to develop a plan of action to prevent traffic accidents. It can also help to prepare formal regulations about a truck driver's vehicle maintenance and driving attitude for a precaution on road accidents.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.4
• /
• pp.330-335
• /
• 2015

Approximately 23% of traffic accidents appear to be caused by drowsiness while driving. This fact shows that drowsy driving is a big factor in many traffic accidents. Therefore, the development of a drowsiness checking system is necessary to prevent drowsy driving. In this paper, we analyse the changes of the histogram of eye region images which are acquired using a CCD camera. We develop a drowsiness checking system using this histogram change information. The experimental results show that our proposed method enhances the accuracy of checking drowsiness by nearly 98%, and can be used to prevent vehicle accidents due to the drowsiness of a driver.

• Journal of Korea Multimedia Society
• /
• v.20 no.6
• /
• pp.873-881
• /
• 2017

Prevention of drowsy driving is one of the important issues for safe driving. In this study, the algorithm for detection of drowsy driving has been developed. The algorithm was implemented by applying template matching and line profile, which detects eye blink. The accuracy of eye detection and blink detection was $97.45{\pm}3.67%$ and $98.50{\pm}0.92%$, which was resulted from the verification experiment that 21 subjects participated. Consequently, the algorithm is expected to be used to prevent sleep-deprived driving.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.905-910
• /
• 2022

Drowsy driving requires a lot of social attention because it increases the incidence of traffic accidents and leads to fatal accidents. The number of accidents caused by drowsy driving is increasing every year. Therefore, in order to solve this problem all over the world, research for measuring various biosignals is being conducted. Among them, this paper focuses on non-contact biosignal analysis. Various noises such as engine, tire, and body vibrations are generated in a running vehicle. To measure the driver's heart rate and respiration rate in a driving vehicle with a piezoelectric sensor, a sensor plate that can cushion vehicle vibrations was designed and noise generated from the vehicle was reduced. In addition, we developed a system for classifying whether the driver is sleeping or not by extracting the model using the CNN-LSTM ensemble learning technique based on the signal of the piezoelectric sensor. In order to learn the sleep state, the subject's biosignals were acquired every 30 seconds, and 797 pieces of data were comparatively analyzed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.9
• /
• pp.699-704
• /
• 2016

In this paper, we propose a development method for a drowsiness detection system using retinex theory and edge information for vehicle safety. Detection of a drowsy state of a driver is very important because the drowsiness of driver is often the main cause of many car accidents. After acquiring an image of the entire face, we executed the pre-process step using the retinex theory. We then applied a technique for the detection of the white pixels using edge information. Experimental results showed that the proposed method improved the accuracy of detecting drowsiness to nearly 98%, and can be used to prevent a car accident caused by the driver's drowsiness.

• Journal of Sensor Science and Technology
• /
• v.5 no.3
• /
• pp.55-64
• /
• 1996

To control arousal level using physiological index, electrodermal activity signal was detected and separated into skin impedance level and response. Arousal state decision and control algorithm was studied to implement and evaluate real time portable arousal control system. The implemented system can detect and control arousal state from initial drowsy state. This system will be applicable to the evaluation of the effect of warning signal, driver's drowsy detecting system, and sleep study.