• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.702-707
• /
• 2007

A Color Discerning Device(CDD) is the equipment to use in a Rice Processing Complex(RPC). A CDD can sorting discolored grain according to light and shade. The existing a CDD's driving performance is not so good as overseas machine. Besides, transportation process causes a defect in the mechanism from impact or harmonic excitation or etc. This study is represented the problem of CDD through experiment and simulation on a CDD. To analysis the problem of driving condition, devide each part of CDD for performed modal analysis. The problem of driving of driving condition and transportation process solved by carry out modal analysis and static analysis.

• 한국자동차공학회논문집
• /
• 제18권3호
• /
• pp.110-115
• /
• 2010

This paper studies the vibration characteristics of a vehicle seat on several driving conditions. Modal test for a vehicle seat is conducted for the three different boundary conditions: on the rigid jig, BIW and the full vehicle. In driving on various road conditions and speeds, vibration level is measured at several locations including seat mounting and seat-back. The vibration pattern for each driving condition is found where the suspension mode and the 1st bending and torsion modes of the seat make the major contribution on it.

• 한국군사과학기술학회지
• /
• 제12권3호
• /
• pp.388-395
• /
• 2009

Surveillance Radar System for naval vessels is a primary core sensor for command and fire control, and provides CFCS(Command and Fire Control System) information for 3-D surveillance and fire control. It's composed of Antenna, Transmitter/Receiver, Signal Processor, and Air drier, which are installed on and under deck. They should be designed and produced in order to endure at any operating circumstances. This paper analyzes load of a driving part for driving the antenna considering factors under external operating circumstances, and proposes a condition of load for maintaining fixed RPM through analyzing internal load of the driving part, and how to reduce the load to meet the condition. This paper is verified through experimental studies.

• 자동차안전학회지
• /
• 제7권2호
• /
• pp.25-31
• /
• 2015

This paper presents a performance evaluation procedure for advanced emergency braking (AEB) system. To guarantee the performance of AEB system, AEB test scenario should contains various driving conditions which can be occurred in real driving condition. Also, performances of each elements of AEB system, such as sensor, decision, human machine interface (HMI) and control, should be evaluated in various situations. For this, driving conditions, road types, environment, and elements of AEB system were introduced. Test scenario has been designed to represent the real driving condition and to evaluate the safety performance of AEB system in various situations. To confirm that the proposed AEB test scenario is realistic and physically meaningful, vehicle test have been conducted in two cases of proposed AEB test scenario: subject vehicle cut-out scenario and narrow street turn left scenario.

• 산업경영시스템학회지
• /
• 제26권1호
• /
• pp.22-29
• /
• 2003

The study was to evaluate psychological and physiological changes of simulator sickness in the controlled condition of driving a car (1 hr. at speed of 60 km/h) in a graphic simulator. Simulator sickness was measured and analyzed every 5 min using both subjective responses(i.e., Simulator Sickness Questionnaire) and Physiological signals(EEG, HRV, Skin Temperature, GSR). The results showed that there was significant differences in subjective response 10 min after the main experiment. From 10 min after the driving, the level of subjective simulator sickness increased significantly, relative one of the rest condition. There also was significant differences in physiological responses between the rest and the 5 min after from the start of driving : for EEG, $\delta$ and $\theta$ at Fz area increased, while $\alpha$ decreased; the averaged R-R interval and skin temperature decreased; LF/HF and GSR increased. The results indicated that simulator sickness was induced by activation of the autonomic nerves and inactivation of the central nerves.

• 인터넷정보학회논문지
• /
• 제23권2호
• /
• pp.53-59
• /
• 2022

3단계 자율주행 차량 이후, 4, 5단계의 자율주행 기술은 차량의 완벽한 주행뿐만 아니라 탑승객의 상태를 최적으로 유지하기 위해 노력하고 있다. 그러나 현재 자율주행 기술은 LiDAR, 전방 카메라 등 시각적 정보에 과하게 의존하기 때문에 지정된 도로 이외의 도로에서 완벽하게 자율주행을 실행하기 힘들다. 따라서 본 논문은 차량이 시각 정보 외의 데이터를 사용하여 도로의 상태를 분류하고, 도로 상태와 주행 상태에 따라 최적의 제동 강도를 계산하는 BSCS (Braking Strength Calculation System)를 제안한다. 본 논문에서 제안하는 BSCS는 KNN 알고리즘을 기반으로 도로의 상태를 분류하는 RCDM (Road Condition Definition Module)과 RCDM의 결과와 현재 주행 상태를 통해 주행 중 최적의 제동 강도를 계산하는 BSCM (Braking Strength Calculation Module)로 구성된다. 본 논문의 실험 결과, KNN 알고리즘에 가장 적합한 K의 수를 찾을 수 있었고, 비지도 학습인 K-means 알고리즘보다 본 논문에서 제안한 RCDM이 더 정확한 것이 증명되었다. 해당 논문의 BSCS는 시각 정보뿐만 아니라 서스펜션에 가해지는 진동 데이터를 사용함으로써, 시각 정보가 제한되는 여러 환경에서 자율주행 차량의 제동을 더 원활하게 만들 수 있다.

• Journal of Biosystems Engineering
• /
• 제26권1호
• /
• pp.11-20
• /
• 2001

Experiments under the stationary and harvesting condition, were performed in order to investigate the vibration characteristics of a head-feeding combine. 6 degrees of freedom components of acceleration at the location of the center of the gravity, and 3 degrees of freedom components of acceleration at the location of the operator seat were measured independently. The vibration characteristics of the combine were estimated with the power spectral density of the time series data of accelerations. From this research, the following results were obtained. 1. Vibration of a head-feeding combine under the stationary condition(engine, thresher and cutter are driven without harvesting) is mainly influenced by the engine. Further, 1/3, 1/2 (sub-harmonic) frequency components of the engine are observed besides engine driving frequency component(45Hz). 2. Vibration of a head-feeding combine under the harvesting condition is influenced by the engine, threshing unit and driving unit. Namely, some kinds of vibration frequency components in harvesting are observed compared with stationary condition. Further, sub-harmonic frequency components of the engine are observed besides engine driving frequency component as same as stationary condition. From these results, it may be concluded that vibration of a head-feeding combine is characteristics of semi-periodic and nonlinear vibration.

• 한국전기전자재료학회논문지
• /
• 제33권6호
• /
• pp.475-482
• /
• 2020

For electronic paper displays using electrophoresis, the response time and reflectivity of the image panel fabricated by filtering are analyzed. For the filtering process, a square wave and ramp wave are applied to white charged particles with a unique q/m value. We divide the sample panels into #1 to #4 according to the applied waveform in the filtering process. Step waves comprising two steps are used to drive the panel; therefore, we divide the driving conditions into D1~D4. The applied voltage at the first stage of the half cycle of the driving waveform moves the charged particles attached via the image force from the electrode, and the applied voltage at the second stage moves the floating charged particles by detaching. As mentioned, four types of driving conditions (D1 to D4) classified according to the half cycle of the driving waveform are applied to the samples #1 to #4), which are classified according to four types of filtering process. When driving condition D1 is applied to the four types of sample panels, the rise time of #1 is 1.59s, #2 is 1.706s, #3 is 1.853s, and #4 is 1.235s, resulting in #4 being relatively faster compared with other sample panels, and showing the same trend in other driving conditions. As a result, we confirm that applying the driving condition D1 causes abrupt movement of the white charged particles injected into the cell. When the same driving waveform (D1) is applied to each sample, reflectivities of 32.1% for #1, 31.4% for #2, 27.9% for #3, and 63.4% for #4 are measured. From the experiment, we confirm that the driving condition D1 (1s of 3.5 V, 9s of 3.0 V) and ramp wave #4 in filtering are desirable for good reflectivity and response time. Our research is expected to contribute to the improvement of the filtering process and optimization of the driving waveform.

• 조명전기설비학회논문지
• /
• 제22권3호
• /
• pp.1-7
• /
• 2008

We have theoretically investigated the asymmetry effects on 10[Gb/s] optical duobinary transmitters from the viewpoint of the driving voltage ratios by computer simulations. For driving voltage ratios(=driving voltage/switching voltage) with smaller than 100[%], the transmission performance has been greatly affected by the asymmetry of the bandwidth of LPFs than that of the Mach-Zehnder Modulator driving voltage. On the other hand, for driving voltage ratios with 100[%], the transmission performance has been degraded by the asymmetry of the driving voltage and is not sensitive to that of the bandwidth of LPFs. For the transmission performance within 1[dB] power penalty under the asymmetry condition, the driving voltage ratio with 100[%] has performed better than the low driving voltage ratios.

• 감성과학
• /
• 제7권3호
• /
• pp.27-35
• /
• 2004

본 연구는 피부전도도(skin conductance response), 말초혈관 반응(peripheral plethysmograph), 피부온도 (skin temperature)와 심박수(heart rate)와 같은 다양한 생리신호를 측정하여 운전자의 심리반응을 통하여 적정 운전상태를 분석하고자 하였다. 운전자의 심리반응을 측정 및 분석하기 위하여 하드웨어와 알고리듬을 개발하였으며, 운전상황은 자동차 시뮬레이터를 이용하여 다양한 가상 운전상황을 설정하고 생리신호를 측정하였다. 측정 결과 운전자 생리신호가 운전환경의 변화에 따른 심리적 긴장 또는 이완 수준을 잘 반영하고 있고, 감정적 변화에는 다소 둔감한 것으로 나타났다. 이를 심리적 순위척도를 이용하여 정량화하여 심리적 적정 운전범위를 제안하였다. 본 연구의 결과는 추후 운전자의 안전운전이나 건강상태를 모니터링 하기 위한 시스템 개발의 자료로 활용할 수 있을 것이다.