• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.3
• /
• pp.257-264
• /
• 2000

This research suggested a method by which the driver space can be designed to best accommodate the driver's anthropometric characteristics. Three-dimensional manikins and a variable seating buck were developed and used for this study. Manikins were designed with 18 links comprising the 95th percentile male and 5th percentile female data. The seating buck was built to create various driving environments using the distance and the height between the H-point(hip pivot) of the seat and the AHP(accelerator heel point), the angle of the back rest, the angle of the steering wheel, the vertical distance of the steering wheel, and the location of the T.G.S.(transmission gear shift) knob. Measurements of each variable were collected with a coordinate measuring machine by positioning the 3-D manikin under various combinations of the design factors of the seating buck, which was constructed based on mid-size domestic passenger cars. The data were then converted to the joint angles of the driver. The combination of the measurements for an optimal driving environment is suggested by applying sets of the joint angles at which the driver feels comfortable.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.10 s.253
• /
• pp.1276-1283
• /
• 2006

This study proposes two ESP systems which are designed to enhance the lateral stability of a vehicle. A BESP uses an inner rear wheel braking pressure controller, while a EBESP employs an inner rear wheel and front outer wheel braking pressure controller. The performances of the BESP and EBESP are evaluated for various road conditions and steering inputs. They reduce the slip angle and eliminate variation in the lateral acceleration, which increase the controllability and stability of the vehicle. However EBESP enhances the lateral stability and comfort. A driver model is also developed to control the steer angle input. It shows good performances because the vehicle tracks the desired lane very well.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.48
• /
• pp.145-152
• /
• 1998

Driving performance is characterized by many things such as driver's experience period, age, ability of information processing and reaction time of control devices and so forth. However, each factor of driving performance is needed to help and screen a poor driver for safe driving. In this paper, driving performance was estimated by reaction of manipulating brake, accelerator, steering wheel and speed. Subjects were grouped by experience of accident and age. Combinations of every group were analysed. For all the dependent variables, only steering wheel and speed were shown to have significant difference, which could be regarded as visual information of speed and direction were the important factors to drive safely. Especially for tile elderly, it is needed to enhance their ability of visual information processing that is to be decreased with aging. Therefore driving simulator to train and screen the poor driver should be studied.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.10a
• /
• pp.130-137
• /
• 1997

During crash of a vehicle a major part of the kinetic energy of the driver is absorbed by a steering system. The deformation characteristics of the steering system has significant effects on the injury of the driver. A part of the energy is absobed by the steering wheel and another part by the collapsable steering column. It is believed that the structure of the steering wheel has an important effect on the injury of the driver. A design criterion is suggested for steering wheels for maximum protection of drivers. Taguchi method is used to obtain the effects design parameters.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.1-8
• /
• 2017

This paper presents the development of an adaptive cruise control (ACC) system, which is one of the typical advanced driver assist systems, for 4-wheel drive hybrid in-wheel electric vehicles. The front wheels of the vehicle are driven by a combustion engine, while its rear wheels are driven by in-wheel motors. This paper proposes an adaptive cruise control system which takes advantage of the unique driveline configuration presented herein, while the proposed power distribution algorithm guarantees its tracking performance and fuel efficiency at the same time. With the proposed algorithm, the vehicle is driven only by the engine in normal situations, while the in-wheel motors are used to distribute the power to the rear wheels if the tracking performance decreases. This paper also presents the modeling of the in-wheel motors, hybrid in-wheel driveline, and integrated ACC control system based on a commercial high-precision vehicle dynamics model. The simulation results obtained with the model are presented to confirm the performance of the proposed algorithm.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.7
• /
• pp.561-568
• /
• 2008

The quality of the automatic transmission shift for a wheel loader has been generally evaluated by driver's perception. However the subjective evaluation of the drivers is not always directly related to the shift quality. It is necessary to set up the method for an objective assessment of the shift quality. In this paper, a quantitative assessment method has been developed for the shift quality of the automatic transmission in a wheel loader. The indices for the evaluation were selected through the various tests like the acceleration and the turbine rpm as well as the subjective evaluation of the driver, and were validated by the correlation between subjective and objective assessments using a psychophysical power law. Based on this method, the shift quality of a wheel loader has been evaluated quantitatively under various shift conditions.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1128-1133
• /
• 2011

This is a testing equipment system to analyze variation of creep force according to wheel-rail tread profile, running speed of vehicle, vertical and lateral force, wheel/rail contact point, attack angle and so on. The creep force affect vehicle derailment, especially climbing derailment. This system is composed of main frame, wheelset and rail disks driver, hydraulic actuator, controller, environmental chamber, safety system and so on.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.5
• /
• pp.88-92
• /
• 2006

Proto Flight Model of Reaction Wheel Assembly Interface Unit(RIU) for STSAT-2 was developed. The RIU of STSAT2 has three major functions for interface between satellite system and RWAs. It has switches for RWA main power, communication Mux. and communication line driver.

• Journal of Industrial Technology
• /
• v.18
• /
• pp.241-248
• /
• 1998

In this study, a modeling method of power-assisted steering systems and driver models for vehicle dynamic analysis using AUTODYN7 is presented. Pressure-flow relations of flow control valve are derived, and the equations of motion of a steering gear are obtained. Combining pressure-flow relations and equations of motion, the steering force can be represented as a function of steering wheel angle or torque. Driver model was modeled based on a PID controller and forward target method. With the steering systems and driver model, various driving tests are conducted using AUTODYN7.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.4
• /
• pp.733-739
• /
• 2010

We developed to have an automatic transferring function of a two-motors-driven electrical scooter for women or seniors to use conveniently it since it has been previously to operate it in manual only. The function would be implemented by using master and slave micro-control units(MCU) in the system with the given input and output signals. The simulation and test of the system results show that the transition conditions of either higher accelerating speed and/or higher torque are demonstrated at the worst conditions, which means that the transition points might be set either at the 70% of accelerating speed or from the 100% of load torque. The developed equipment is very useful and has good performance in the real test and would be used for top brand and might be applicable to any other types of green cars.