• Asian-Australasian Journal of Animal Sciences
• /
• 제26권11호
• /
• pp.1592-1597
• /
• 2013

Type of dietary direct-fed microbials (DFMs) or poultry litter could directly influence the composition of gut microbiota. Gut microbiota plays an important role in shaping the developing immune system and maintaining the homeostasis of the mature immune system in mammal and chickens. The present study was carried out to investigate the interaction among litter, DFMs and immunity in broiler chickens exposed to a field-simulated environment. Immune status of broiler chickens was assessed by serum antibodies against Eimeria spp. and Clostridium spp. and intestinal cytokine mRNA expression. The current experimental design had a $3{\times}2$ factorial arrangement of treatments with three types of litter, i.e., fresh litter or used litter that was obtained from a farm with no disease outbreak (used litter) or a farm with history of a gangrenous dermatitis outbreak (GD litter), and two dietary treatments with or without DFMs. It was found that either DFM addition or type of litter significantly affected anticoccidial antibody levels of broiler chickens at d 42. In general, dietary DFMs increased the anticoccidial antibodies in the fresh-litter raised chickens, but lowered the levels in the GD-litter raised chickens. Serum antibodies against Clostridium perfringens ${\alpha}$-toxin were significantly (p<0.05) higher in chickens raised on GD litter compared with those raised on fresh litter. Cytokine mRNA expression was significantly (p<0.05) altered by either the type of litter or DFMs. Of interest, dietary DFMs lowered interferon-${\gamma}$, interleukin 1beta, and CXCLi2 cytokine mRNA expression in chickens raised on fresh litter but increased them in GD-litter raised chickens. In conclusion, dietary DFMs modulate various immune parameters of broiler chickens, but the DFM-mediated effects were dependent upon the type of litter on which chickens were raised.

• 멤브레인
• /
• 제28권1호
• /
• pp.75-82
• /
• 2018

정삼투법을 이용한 해수담수화는 역삼투 공정에 비해 에너지 절감이 가능하여 해수담수화 차세대 기술로 주목받고 있다. 막을 기반으로 하는 수처리 분야에서 분리 성능을 향상시키고 새로운 기능을 부여하기 위해, 고분자 매트릭스에 필러인 나노물질을 삽입하는 박막 나노복합체 분리막(thin film nanocomposite, TFN) 개발에 대한 연구가 요구되고 있다. 본 연구에서는 딥 코팅(dip coating) 방법을 기반으로 한 다층박막적층법(Layer-by-layer, LBL)을 이용하여 산화그래핀(graphene oxide, GO)의 나노 적층구조를 제어하여, 정삼투 공정에서의 높은 안정성 및 높은 수투과도 및 염 제거, 낮은 염 역확산을 갖는 그래핀 나노복합체 분리막을 개발하고자 하였다. 정삼투 공정의 성능 향상을 위한 산화그래핀의 환원 반응시간과 LBL 딥코팅 적층 수의 최적화를 통해, 수투과도 2.51 LMH/bar, 물분자 선택성 8.3 L/g, 염 제거율 99.5%를 갖는 나노복합체 분리막을 개발하였다. 이는 상용화된 CTA FO 분리막보다 수투과도는 10배, 물분자 선택성은 4배 높게 향상되었으며, 염 제거율은 비슷한 수준으로 나타났다.

• 유통과학연구
• /
• 제13권2호
• /
• pp.95-104
• /
• 2015

Purpose - This is a comparative study of the market development and characteristics of Ulsan in South Korea, Fukuoka in Japan, and Yanji in China, which are major East Sea Rim cities with adjacent areas of similar natural characteristics of the sea and the country. Particularly, it considers these aspects while focusing on the evolution of networks that appear in the distribution system and at the same time examining the institutions of market activation and regulations that are handled by the central and the local government and the changing logistics due to the development of transportation and the concern of food safety, using a meso-analysis approach. Research design, data, and methodology - The study used a historical and comparative approach with a focus on case studies. It made use of various materials such as local newspaper articles, reports, literature, interviews with experts, discussions with local merchants, discussions with customers, and so forth. Results - In the case of Fukuoka, from the 1960s, due to the entry of supermarkets, supermarkets expanded and they have now come to a dominant market position in the current market. They offer a convenient and comfortable environment while providing a large mall offering a variety of educational and cultural activities for customers to meet the customers' needs, such as the preferences of Korean tourists, who appear to prefer Japanese foods. The Fukuoka City Central Wholesale Market has been exporting fruits and vegetables as well as seafood products to Korea, China, and so forth. In the case of Ulsan, as in the early 2000s, due to the expansion of supermarkets, the traditional markets have been shrinking and further, the modernization of traditional markets was conducted under the auspices of the Small Business Administration. In addition to the large discount malls, the expansion of SSM is expected to further drive the small trader bay. Shopping malls, department stores, and traditional markets contend with each other in Yanji, China, but a large number of citizens appear to prefer traditional markets and imported milk in the supermarket after the melamine scandal in China. Recently, the WanYuan (萬源) wholesale market has been partially completed and made an attempt to become a logistics hub in Northeast Asia. Conclusions - For the development of Korea's retail industry, it is important to offer the government with proposals regarding desired regulation. On the other hand, in order to enable the business of traditional markets, it requires an association for cultural tourism. At present, it would be better to provide a venture fund for the youth rather than infrastructure support. This study emphasizes the importance of institutions and policy to develop networks in the East Sea Rim. Future studies should conduct a survey on customers, managers, and merchants more carefully and systematically to understand the market situation while considering the size of the city and its evolution of markets, as well as policies and institutions.

• 기술혁신학회지
• /
• 제16권1호
• /
• pp.41-62
• /
• 2013

중소기업청에서는 중소기업의 연구개발을 촉진하고 혁신형 중소기업을 육성하기 위해, 정책적 부합성을 우선적으로 고려하여 선정된 중점지원분야를 중심으로 연구개발 자금을 지원하고 있다. 이러한 하향식 중점지원분야 선정의 실효성을 파악하기 위해 각 분야별 종사 중소기업의 분포, 과제 지원 중소기업의 분포, 선정 과제 분포 사이의 상관관계를 분석하였다. 그 결과 종사 중소기업 수와 과제 지원 중소기업 수가 각 분야별로 큰 편차를 보였으며, 선정된 중점지원분야가 중소기업의 기술개발 수요를 정확히 반영하지 못하고 있었다. 또한 지원 중소기업의 분포가 종사 중소기업의 분포에 강한 의존성을 보여, 중소기업들은 주로 정책적 방향에 따르기 보다는 현재 종사하고 있는 사업 분야에서 연구개발을 기획하려는 경향이 있음을 알 수 있었다. 아울러 선정과제 분포가 지원 중소기업 분포에 강한 상관관계를 보여, 중점지원분야들이 전략적으로 고르게 육성되기 보다는 단순히 지원업체의 분포에 따라 지원자금이 배분되고 있는 것을 알 수 있었다. 본 연구에서는 하향식 중점지원분야 선정의 한계를 보완하기 위해, 중소기업의 기술개발 니즈를 우선 반영하는 상향식 중점지원분야 선정 방안을 제안하였다. 상향식 선정 방식에서는 기술개발 수요, 기술개발 역량, 기술성 및 시장성, 정책적 중요도의 순서로 고려되는 것이 바람직하며, 이는 다양한 사업 기획에 더욱 유연하게 활용될 수 있을 것으로 기대된다.

• 한국산학기술학회논문지
• /
• 제19권7호
• /
• pp.9-15
• /
• 2018

본 연구에서는 터보과급기의 성능을 저해하는 주요 인자 중 하나인 마찰손실에 대한 연구를 수행하였다. 실제 엔진에서 빈번하게 사용되는 저속 구간에서의 승용차용 터보과급기의 마찰손실 측정 장치를 개발하고, 저속 영역에서 작동하는 터보과급기의 마찰손실을 측정하였다. 플로팅 타입의 승용차용 터보과급기 저널 베어링를 실험 대상으로 선정하였으며, 마찰손실 측정 장치는 구동 모터, 오일 공급 시스템, 마그네틱 커플링으로 구성하였다. 실제 차량의 저속 운전 상황을 모사할 수 있도록 설계, 제작되었고, 터보과급기 회전속도, 오일 온도 및 압력을 실험 변수로 선정하였다. 또한, 마찰손실 측정 장치는 로드 셀을 사용하여 발생하는 마찰 토크를 직접 측정하여 마찰손실을 산출하였으며, 커플링을 통해 구동 모터의 동력을 터보과급기 축에 전달하고, 오일 온도 및 압력을 조절하였다. 오일 압력 3bar와 4bar로 오일을 공급하는 상태에서 오일 온도를 $50^{\circ}C$에서 $100^{\circ}C$까지 $10^{\circ}C$ 간격으로 변화시키면서 터보과급기를 회전수 30,000~90,000rpm으로 작동시켰다. 터보과급기 회전속도 증가할 때 마찰손실은 증가하였으며, 과급기 회전속도의 1.6 승에 비례함을 보였다. 오일 온도가 증가함에 따라 마찰손실은 감소하였으며, 오일 압력이 증가함에 따라 마찰손실은 증가하였다. 따라서 적절한 오일 온도와 압력을 유지하는 것이 필요하다.

• 한국산학기술학회논문지
• /
• 제18권1호
• /
• pp.585-591
• /
• 2017

본 연구에서는 터보과급기의 성능을 저해하는 주요 인자 중 하나인 마찰손실에 대한 연구를 수행하였다. 실제 엔진에서 빈번하게 사용되는 저속 구간에서의 승용차용 터보과급기의 마찰손실 측정 장치를 개발하고, 30,000~90,000rpm의 저속 영역에서 작동하는 터보과급기의 마찰손실을 측정하였다. 플로팅 베어링 타입의 승용차용 터보과급기를 실험 대상으로 선정하였으며, 마찰손실 측정 장치는 구동 모터, 오일 공급 시스템, 커플링으로 구성되었다. 실제 차량의 저속 운전 상황을 모사할 수 있도록 설계, 제작되었고, 회전속도, 오일 온도 및 압력을 실험 변수로 선정하였다. 또한, 마찰손실 측정 장치는 로드셀을 사용하여 발생하는 마찰 토크를 직접 측정하여 마찰손실을 산출하였으며, 마그네틱 커플링을 통해 구동 모터의 동력을 터보과급기 축에 전달하고, 오일 공급 시스템을 오일 온도 및 압력을 조절하였다. 온도 $60^{\circ}C$와 $90^{\circ}C$, 압력 4bar의 오일을 공급하는 상태에서 터보과급기가 회전수 30,000~90,000rpm으로 작동할 때 터보과급기 회전속도 증가할 때 마찰손실은 증가하며, 대략적으로 과급기 회전속도의 1.4~1.8 지수승에 비례함을 보이고 있다. 또한 오일온도가 $60^{\circ}C$에서 $90^{\circ}C$로 증가할 때 마찰손실은 최소 41%, 최대 63% 감소하였다.

• 한국ITS학회 논문지
• /
• 제16권1호
• /
• pp.186-195
• /
• 2017

최근 자율주행 자동차에 대한 연구가 활발하다. 이러한 자율주행을 실현하기 위해서는 ITS, Connected Car, V2X, ADAS 등의 여러 가지 기술이 있다. 그 중에서도 차선의 변경과 목적지까지 운행하기 위해서는 도로상에서 차량이 어디에 있는가를 인식하는 것이 특히 중요하다. 일반적으로 GPS 및 카메라 영상처리를 통하여 이루어지고 있다. 그러나 GPS의 경우 터널과 같은 음영 지역으로 인한 위치 확인의 신뢰성에 한계가 있으며, 카메라 영상처리를 실행할 경우 도로 차선의 상태 및 도로 주변 환경에 따라 인식 및 측위에 한계가 있다. 본 논문에서는 GPS 음영지역인 터널에서 자율주행 자동차를 위한 LED 조명이 설치되어야 함을 제안한다. 본 논문의 실험에서는 차로별 다른 색온도의 빛을 조사하는 터널 LED 조명 모의 환경을 구성한 후, 색온도를 분석하여 자율주행차의 현재 차로의 위치를 측정할 수 있음을 보였다. 이를 바탕으로 본 연구에서는 터널 LED 조명을 이용한 차로 위치측위 기술을 제안한다.

• 유통과학연구
• /
• 제13권10호
• /
• pp.109-114
• /
• 2015

Purpose - The movie market has the characteristics of being a perfectly competitive market as well as a pure monopolistic market at the same time. This is because there are competitors in the industry but prices, although not fixed, have not changed a lot. Price competition may not have spread, but the competition is focused on artistic value, and the degree of box office success is most important. The artistic value is determined in the course of the production process. However, the degree of box office success is dependent upon the marketing manager. The marketing strategy represents the difference in the standard or quality of the movie. Inherently, the marketing manager adopts the entertainment strategy based on the quality of the foundation of the completed movie. At this time, the marketing manager knows the pertinent information (high quality/low quality) regarding the movie. This research study tries to reveal what should be the reasonable movie marketing expense, dependent on the quality of the movie. Research design, data, and methodology - Using a game scenario with different market players, the goal of the research analysis is to find out the following. First, the marketing expense is determined to maximize the profits after film production. Second, after the production costs are already committed, the manufacturer gets to choose the marketing level. At this time, there will be a profit maximization point, considering the competition. The premise of the research is as follows: if it is a good movie of quality, positive word of mouth increasing the audience continuously slows down the speed of the demand curve. If the movie quality is bad, the negative word of mouth decreasing the audience gradually hastens the speed of the demand curve. On the marketing side, when the manufacturer invests heavily in the marketing expense of the movie, consumer expectations increase to drive up the audience numbers. On the other hand, it is difficult to improve the profits excessively. When the manufacturer invests in marketing a little bit, the marketing expense is only relatively committed, therefore a lot of demand cannot be gained. Results - If a fixed market share is in a competitive situation, a low quality manufacturer expends relatively more marketing expense. If the situation assumes two manufacturers spend the same for the cost of production, the high quality manufacturer takes more profit. If the manufacturer expends less marketing budget to save costs, the optimum profit cannot be achieved since the other party (opponent) grabs the initial market share. Conclusions - In conclusion, investment is essential for market share to increase. We must refrain from a zero-sum game and have models where the game participants pursue the creative profits together. In the current film industry, there is the dominating logic of winner and loser but we have to create a film industry environment where the participants can be altogether satisfied and live together.

• 한국의료질향상학회지
• /
• 제10권1호
• /
• pp.58-76
• /
• 2003

Background : Aim of this study is focused on the analysis of the needed abilities of medical representatives resulting in building up the market and increasing sales. It is to propose methods to increase this ability ensuring continuous growth in market share and profit. Methods : A survey was conducted between January 6 and May 31, 2003. Using SPSS(Version 10.0), the collected data was analyzed by Hotelling T2, factor analysis. Some hypotheses were selected to include the conclusion. Some questionnaires for physicians working in hospitals or clinics and the medical representatives working in a pharmaceutical company were created and asked to them to either prove or reject those hypotheses. The results were analyzed to find the primary factors that effect the interactions between physician and the medical representatives. These factors were also studied along with the theoretical research based on published references. Results : The results were as follows. The main reasons for the physician to meet with a medical representatives were collection of product informations needed for patient treatment and collection of informations on current medical issue and as well as personal interests. The main parameters by which physicians evaluate the medical representatives are human relationship including sincerity and manners and supply of accurate and unbiased information on products. Overall, the medical representatives' perception on the importance of medical knowledge and ability to deliver it are lower than that expected by physicians. Conclusion : Medical and pharmaceutical companies' environment are changed rapidly. And those changes forced medical representatives to set new roles and competency. In order to drive away from the past 'rule of thumb' and 'adaptation to circumstance', optimal method and systemic development to train and support the medical representatives should be quipped. They will help medical representatives to be specialists in medical knowledge and to understand the exact need of health care professions. Product competitiveness will be increased and eventually successful business can be achieved through it.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.240-240
• /
• 2011

The first neutral beam injector (NBI-1) has been developed for the Korea Superconducting Tokamak Advanced Research (KSTAR) tokamak. A first long pulse ion source (LPIS-1) has been installed on the NBI-1 for an auxiliary heating and current drive of KSTAR core plasmas. Performance of ion and neutral beam extractions in the LPIS-1 was investigated initially on the KSTAR NBI-1 system, prior to the neutral beam injection into the main plasmas. The ion source consists of a JAEA magnetic bucket plasma generator with multi-pole cusp fields and a set of KAERI prototype-III tetrode accelerators with circular apertures. The inner volume of plasma generator and accelerator column in the LPIS-1 is approximately 123 liters. Final design requirements for the ion source were a 120 kV/ 65 A deuterium beam and a 300 s pulse length. The extraction of ion beams was initiated by the formation of arc plasmas in the LPIS-1, called as an arc-beam extraction method. A stable ion beam extraction of LPIS-1 has been achieved up to an 100 kV/42 A for a 4 s pulse length and an 80 kV/25 A for a 14 s pulse length. Optimum beam perveance of 1.21 microperv has been found at an accelerating voltage of 80 kV. Neutralization efficiency has been measured by using a water flow calorimetry (WFC) method of calorimeter and an operation of bending magnet. The full-energy species of ion beams have been detected by using the diagnostic method of optical multichannel analyzer (OMA). An arc efficiency of the LPIS was 0.6~1.1 A/kW depending on the operating conditions of arc discharge.