• Journal of the Korean Institute of Gas
• /
• v.2 no.4
• /
• pp.1-6
• /
• 1998

In order to increase design efficiency, it is required to design steam boiler pressure parts systematically considering daily start-stop operation and load variation. The objective of this research is to develope an integrated system for increasing design efficiency of boiler pressure parts. The developed system consists of three program modules: (1) flexibility design module for the header stub considering fatigue life, (2) fatigue limit calculation and life evaluation module for the thick-walled boiler pressure part under cyclic operation using TRD301 code, (3) drawing automation module for the header and drum producing design drawings, welding data and bill of materials.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.27-36
• /
• 2004

Contemporary objectives for steel rod rolling processing are increasingly complex and often contrasting i.e. obtaining a desired product with optimum combination of properties such as strength, toughness and formability at lower cost. Low-alloy steel rods have been produced with several heat treatments for drawing and forging processes at room temperature. In order to reduce these heat treatments much of the researches concerning of high temperature mechanical behavior of steel rods have been conducted at wire rod mill of POSCO. In this present work, optimizations of rolling temperature and cooling rate for JS-SCM435 are performed to eliminate softening heat treatment(Low Temperature Annealing) for drawing process. The results from the optimization changed the microstructure of rods after rod rolling from Bainite with high tensile strength of 1000Mpa to Pearlite and Ferrite with appropriate strength of 750Mpa that is equivalent tensile strength after softening heat treatment.

• The International Journal of Costume Culture
• /
• v.13 no.1
• /
• pp.1-4
• /
• 2010

The hand printed cottons of India are historically world-renowned for their rich fast colours, elaborate designs, and matchless quality. Until the discovery of synthetic dyestuffs in the latter part of the nineteenth century, the unsurpassed master dyers of cotton were the craftsmen of India-birthplace of cultivated cotton. The Indian printers and dyers monopolised this arcane art of permeating cotton cloth with richly hued, colour-fast designs, and the fruits of their labour proved hugely influential in international trade and the development of modern textile technologies. This paper focuses on a lesser-known body of hand printed cottons, traditionally produced in rural Rajasthan for everyday use by the local pastoral communities. Drawing on extensive research carried out with the region's Chhipa community of hereditary cloth printers, the complex and multiple applications of mordant, dye and resist are illustrated. Often taking months to complete, the enduring popularity of these labour-intensive hand printed cottons is then discussed, particularly in the light of the hugesocial importance borne by cloth in Rajasthan. Cloth and clothing are widely recognised as indicators of social status, gender, rank, and individual and group affiliations. In addition, cloth and clothing have been established as indicators of social, economic, political and technological change. The paper concludes by drawing attention to the recent influx of machine-printed polyester textiles, often replicating the designs or colours of the traditional locally produced cottons. Thus women of the region, whilst using these modern synthetic textiles as part of newer ways of expressing their identity, also visibly retain the values associated with hand printed cottons and traditional dress codes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.536-539
• /
• 2002

In this paper, we developed the automatic optical fiber aligner by image processing and automatic loading system. Optical fiber is indispensable for optical communication systems that transmit large volumes of data at high speed, but super-precision technology in sub-micron units is required for optical axis adjustment, we have developed 6-axis micro stage system for I/O optical fiber arrays, the initial automatic aligning system/software for a input optical array by the image processing technique, fast I/O-synchronous aligning strategy, the automatic loading/unloading system and the automatic UV bonding mechanism. In order to adjust the alignment it used on PC based motion controller, a $10\mu\textrm{mm}$ repeat-detailed drawing of automatic loading system is developed by a primary line up for high detailed drawing. Also, at this researches used the image processing system and algorithm instead of the existing a primary hand-line up. and fiber input array and waveguide chip formed in line by automatic. Therefore, the developed and manufactured optical aligning system in this research fulfills the great role of support industry for major electronics manufacturers, telecommunications companies, universities, government agencies and other research institutions.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.157-164
• /
• 2008

The temperature-entropy diagram of water or vapor displays graphically the thermophysical properties, so it is very conveniently used in various thermal systems. On general T-s chart of water, there are temperature, pressure, quality, specific volume, specific enthalpy, specific entropy. However, various state and process values besides above properties can be plotted on T-s diagram. In this study, we developed the software drawing twenty six kinds of properties, that is temperature, pressure, quality, specific volume, specific internal energy, specific enthalpy, specific entropy, specific exergy, exergy ratio, density, isobaric specific heat, isochoric specific heat, ratio of specific heat, coefficient of viscosity, kinematic coefficient of viscosity, thermal conductivity, prandtl number, ion product, static dielectric constant, isentropic exponent, velocity of sound, joule-thomson coefficient, pressure coefficient, volumetric coefficient of expansion, isentropic compressibility, and isothermal compressibility. Also, this software can analyze and print the system values of mass flow rate, volume flow rate, internal energy flow rate, enthalpy flow rate, entropy flow rate, exergy flow rate, heat flow rate, power output, power efficiency, and reversible work. Additionally, this software support the functions such as MS-Power Point.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.3
• /
• pp.157-169
• /
• 2002

In the initial stages of ship design, designers represent geometry, arrangement, and dimension of hull structures with 2D geometric primitives such as points, lines, arcs, and drawing symbols. However, these design information(‘2D geometric primitives’) defined in the drawing sheet require more intelligent translation processes by the designers in the next design stages. Thus, the loss of design semantics could be occurred and following design processes could be delayed. In the initial design stages, it is not easy to adopt commercial 3D CAD systems, which have been developed f3r being used in detail and production design stages, because the 3D CAD systems require detailed input for geometry definition. In this study, a semantic product model data structure was proposed, and an initial structural CAD system was developed based on the proposed data structure. Contents(‘product model data and design knowledges’) of the proposed data structure are filled with minimal input of the designers, and then 3D solid model and production material information can be automatically generated as occasion demands. Finally, the applicability of the proposed semantic product model data structure and the developed initial structural CAD system was verified through application to deadweight 300,000ton VLCC(Very Large Crude oil Carrier) product modeling procedure.

• Land and Housing Review
• /
• v.11 no.3
• /
• pp.93-101
• /
• 2020

Recently, as a BIM-based construction simulation system, 4D CAD tools using virtual reality (VR) objects are being applied in construction project. In such a system, since the expression of the object is based on VR image, it has a sense of separation from the real environment, thus limiting the use of field engineers. For this reason, there are increasing cases of applying augmented reality (AR) technology to reduce the sense of separation from the field and express realistic VR objects. This study attempts to develop a methodology and BIM module for the pre-construction verification system using AR technology to increase the practical utility of VR-based BIM objects. To this end, authors develop an AR-based drawing verification function and drawing object-based 4D model augmentation function that can increase the practical utility of 2D drawings, and verify the applicability of the system by performing case analysis. Since VR object-based image has a problem of low realism to field engineers, the linking technology between AR object and 4D model is expected to contribute to the expansion of the use of 4D CADsystem in the construction project.

• Transactions of Materials Processing
• /
• v.32 no.4
• /
• pp.199-207
• /
• 2023

The stainless steel basket-bowl, a critical component of washing machines, is characterized by its unique two-tiered circular shape. This study explores the potential of a draw-bead free die design to address tearing concerns in the prospective plastic layer during the drawing operation. In order to prevent wrinkles that may arise from the absence of a draw-bead, a two-stage punch configuration is proposed. The influence of the blank holder force on wrinkle reduction is also examined. Finite element analysis is employed to evaluate the proposed die design by analyzing the wrinkle shape and strain mode. The results confirm that the stainless steel basket-bowl can be successfully drawn without wrinkles utilizing the proposed two-stage punch without a draw-bead on the blank holder. These findings contribute to the development of more efficient and reliable manufacturing processes for the stainless steel basket-bowl production.

• Journal of the Ergonomics Society of Korea
• /
• v.24 no.2
• /
• pp.85-91
• /
• 2005

To understand the basic relationship between 3D curved surface model and 2D pattern, simplified torso model was generated by commercial CAD program (IDEAS). 3D torso model was then divided into different blocks and unfolded into a flat pattern as in ordinary works of clothing item design. As results, 2D pattern development of different part of 3D torso model was attempted and analyzed mathematically. It was found that different height, radius and tangent slope of 3D blocks resulted in different 2D pattern. The relationships between the shape parameters of 3D torso blocks and those of 2D patterns were analyzed using regression equations. Direct way of drawing a 2D pattern of corresponding 3D torso block was also illustrated for the convenience of pattern making using conventional measurements of upper/ lower radii and height of 3D torso block.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.11
• /
• pp.87-96
• /
• 2012

This paper propose a development of surface permanent mount synchronous generator(SPMSG) for 5-phase 5Kw in order to study a polyphase ac machinery that keep hold of advantages more than traditional three-phase squirrel-cage induction motor, such as reducing a amplitude of torque pulsation decreasing electric noises, and increasing the reliability. Design methods of the generator use a development tools with Maxwell 2D and Simplorer. There are designed drawing of manufactured frames of the SPMSG. A amplitude and waveform of the generated electromotive force, FFT analysis of harmonics within output voltages, and reviewing a experiment results are shown by variable output frequency. We are presenting a design and manufacture methods for the SPMSG.