• 한국정밀공학회지
• /
• 제19권2호
• /
• pp.177-186
• /
• 2002

This paper describes a research work on the development of computer-aided design system far the deep drawing & ironing of high pressure gas cylinder. An approach to the design system is based on the knowledge-based rules. Knowledge for the system is formulated from plasticity theories, handbook, experimental results and the empirical knowledge of field experts. This system has been written in AutoLISP on the AutoCAD Rl4.0 using personal computer. This system is composed of three modules which are input. process design and drawing.

• 가정과삶의질연구
• /
• 제23권1호
• /
• pp.209-222
• /
• 2005

This study was conducted to investigate the effect of interview techniques on memory accuracy and suggestibility of preschool children. Forty-five preschool children participated in a magic show(target event) and 1 week later, all children received suggestive interview in two conditions(language condition & drawing condition). Another 1 week later, all children's recall contents of the magic show was assessed. During suggestive interview, children in drawing condition show more 'acception' response than children in language condition, and children in the question condition show less 'remember' response than children in drawing condition. In second interview children reported more words, and specially ones in language condition report more suggested words than ones in drawing condition. Finally, children's recalls were more accurate on controled informations of the event than on suggestive.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1745-1748
• /
• 2005

Near-infrared spectroscopy (NIRS) can be used to monitor brain activation by measuring changes in the concentration of oxy- and deoxy-hemoglobin (Hb) by their different spectra in the near-infrared range. Because NIRS is a noninvasive, highly flexible and portable device, it is very suitable to study brain activation when a human repeatedly performs a manipulative task, and possibly provides useful information to construct human adaptive mechatronics (HAM). There is some evidence that the dorsolateral prefrontal cortex (DLPFC) plays a major role in working memory and it is proposed that the use of working memory decreases as a human develops manipulative skills. In the present study, we investigated the activation of the dorsolateral prefrontal cortex (DLPFC) of the brain in Brodmann's areas 9 and 46 in drawing tasks to examine whether NIRS can measure the changes of DLPFC activation as a human develops manipulative skills. Subjects performed a mirror image drawing task and a square drawing task by ones' left hands. In the mirror image task the subject drew following a star shape based on a mirror image of it, but square drawing did not involve mirror image and was estimated to be simpler. The changes of the concentration of oxy-Hb was higher in the mirror image drawing than the square drawing in most subjects. The changes of oxy-Hb decreased as the subject repeated the drawing task in most subjects. In conclusion, The activation of DLPFC measured by NIRS can reflect the brain activity in the development of manipulative skills.

• 소성∙가공
• /
• 제7권3호
• /
• pp.225-232
• /
• 1998

This article is aimed primarily at establishing a process planning method for complex circular shells. For the deep drawing of complex shaped shell, the optimum process design is required to reduce the trial cost improve the quality, increase the productivity and shorten the delivery. The present approach which is related to the optimum process planning is based on the empirical knowledge through trial and error in the industrial field. In order to check the validity and the effectiveness of proposed work a sample process design has been applied to the multi-stepped deep drawing of com-plex shell considering the process variables such as drawing rate radius and blank development. In particular the difference between the limiting drawing rate and to optimum drawing rate has been discussed and the usefulness of present suggestion has been shown.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.160-167
• /
• 1998

This article is aimed primarily at establishing a process planning method for complex circular shells. For the deep drawing of complex shaped shell, the optimum process design is required to reduce the trial cost, improve the quality, increase the productivity and shorten the delivery. The present approach which is related to the optimum process planning is based on the empirical knowledge through trial and error in the industrial field. In order to check the validity and the effectiveness of proposed work, a sample process design has been applied to the multi-stepped deep drawing of complex shell considering the process variables such as drawing rate, radius and blank development. In particular, the difference between the limiting drawing rate and the optimum drawing rate has been discussed and has been shown the usefulness of present suggestion.

• 한국실내디자인학회논문집
• /
• 제22권1호
• /
• pp.97-104
• /
• 2013

This study aims at finding out the characteristics and influences of Libeskind's early drawing works through comparisons of each drawing. The importance of his experimental drawing works is not only their uniqueness but also relationship to creation and development of his architecture. Libeskind's musical and educational background had great impacts on forming his early drawings. A series of drawings including 'Micromegas', 'Chamberworks', and 'Theatrum Mundi' shows variety and experiments about reconstruction of three dimensional architectural fragments, abstractive line drawing and plane oriented painting. Libeskind himself cease to experiment drawing techniques but their characteristics still remain in his sketches, diagram and conceptual drawings. In spite of influences of undergraduate design studios, theoretical background of graduate studies, their experimental features are due to his continuous endeavor to make and develop his drawing skills and contents. As a result, his early drawings act as media and way to communicate and develop his concepts.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2001년도 Bulletin of The 5th Asian Design Conference International Symposium on Design Science
• /
• pp.59.1-59
• /
• 2001

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.46-57
• /
• 1998

Even though there are some studies on the deep drawing process and process planning, little study has been done on the methodology of process planning of secondary operations of deep drawing such as 'piercins'. In this paper, first, we systematized the methodology of the process planning of secondary operations on axisymmetric cup. Second we described the development of the expert system for their CAPP For these studies, we extracted the knowledge of their process planning from experts and analysed and systemized them. To develop the expert system, rule-based reasoning paradigm is used. The shape information of manufacturing features of secondary operations are manually input to the system through SUI. The process planning results are automatically connected to AutoCAD. We believe that the systematized process knowledge and the development of the expert system for its CAPP could give lots of aids to the associated field.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.334-337
• /
• 2005

The objective of this research works is to propose a rapid development methodology of small size deep drawing tools for electronic parts utilizing the technology combination of CAE and RP/RT. The technology is applied to the development of deep drawing tools with a drain shape. The final surface of tools is obtained from the evaluation of the formability using the CAE. In order to manufacture the physical prototype of tools fer try-out terming, several fabrication experiments are carried out for three types of rapid tool manufacturing technology. Through the fabrication experiments, the acceptable rapid manufacturing technologies of deep drawing tools with a small size have been proposed.

• 한국주거학회논문집
• /
• 제27권6호
• /
• pp.137-144
• /
• 2016

In modular architecture, manufacturing drawing which includes whole information for modular unit production is essential since works for modular unit have to be performed in manufacturing factory not construction field. Although the manufacturing drawing is important as known it is insufficient to utilize the manufacturing drawing in modular architecture project and this makes modular unit low-quality with re-work and work time delay. To prevent low-quality modular unit caused by insufficient manufacturing drawing, in this research firstly manufacturing drawing's current situation and error cases in manufacturing phase of past modular housing project were analyzed, and correlation between reduction of errors occurance frequency and improving manufacturing drawing was verified. Secondly manufacturing drawing improvement factors were deducted in interior, furniture, mechanical work phase which errors' occurance rate is high and the way of deducting manufacturing drawing lists and contents were suggested with light-weight work as an example in case of new type of errors occurance. A series of research process can contribute to good-quality modular unit by errors reduction. As a result of research, about half of errors occurance can be reduced with suggested manufacturing drawing improvement factors. And the manufacturing drawing process can contribute to modular production which have uniform quality.