• 대한정형외과스포츠의학회지
• /
• 제1권1호
• /
• pp.26-30
• /
• 2002

목적: 동종골-슬개건-골을이용한전방십자인대재건술시인간골간섭나사못의초기및조기고정력을알아보려고하였다. 대상및방법 : 동종골-슬개건-골을이용한전방십자인대재건술을28 슬관절에대해수술후6주, 12주, 6개월, 1년에추적조사하였다. Lachman test, flexion rotation drawer test, jerk test등의이학적검사를시행하였고KT-1000 측정을동시에시행하여경골의전방전위정도를측정하였다. Lachman test는 0$\~$2mm 전방전위까지를정상으로하였고KT-1000 측정은정상측과비교하여 2mm 이내는정상으로하였다. 마지막검사시M RI를시행하였다. 결과: 단일예를제외하고는모두이학적검사와KT-1000 측정상정상범위에속하였다. 실패한일례는수술소견상이식물이경골터널에서의근위전위되었으며이는넓어진터널을감안하지않고단하나의간섭나사못을사용한기술적실수로평가되었다. 결론: 인간골골피간섭나사못은전방십자인대의재건술을시행하는데충분한초기및조기고정력을보여주었다.

• 한국산학기술학회논문지
• /
• 제12권7호
• /
• pp.2919-2924
• /
• 2011

자동서랍함용 완충기는 서랍을 여닫을 때 충격을 흡수하고 속도를 조절하는 역할을 해 준다. 완충기 튜브는 완충기의 구성품을 에워 쌓고 있는 원통 모양의 케이스이며 아세탈 재질로 되어있다. 본 연구는 사출 성형 공정에서 제작된 완충기 튜브의 품질 안정성을 평가하는 데 목적이 있다. 완충기 튜브는 4 캐비티 냉각장치를 갖춘 사출 성형공정에서 제작된다. 본 연구에서는 완충기 튜브의 품질 안정을 판단하기 위해 분석과 시험이 수행되었다. 분석과 시험은 컴퓨터 시뮬레이션을 통한 품질 분석과 연구된 튜브에 대한 외산품과의 성능 비교 시험이다. 사출 압력은 87.6 MPa로, 전체 휨량은 0.07~1.0 mm로 계산하였다. 연구된 튜브와 외산품을 비교해 볼 때 튜브의 최대 압축-하중은 231 kgf, 구간별 변위-하중은 0.05 kgf, 그리고 또 튜브 내경의 표면거칠기(Ra)는 $0.02\;{\mu}m$ 향상되었다. 결과적으로 사출 성형 공정에서 제작되어지는 연구된 튜브의 품질은 안정되었고 성능이 우수함을 알 수 있었다.

• 한국응용곤충학회지
• /
• 제61권1호
• /
• pp.249-254
• /
• 2022

오래전부터 산업곤충으로서 이용되어온 누에는 최근 바이오 신소재 생산을 위한 생체공장으로써 주목받고 있다. 소재생산을 위해서는 주로 형질전환 기술을 이용하게 되며, 이는 배아가 있는 알 속으로 목적 유전자를 삽입하는 마이크로인젝션(microinjection) 방식으로 이루어진다. 마이크로인젝션을 위해서는 알을 고정하는 과정이 필수적이며 시간 소모 및 피로도가 높은 작업이다. 따라서 본 연구에서는 시간 소모 및 피로도 개선을 통하여 형질전환 효율을 높이고자 3D 프린팅을 이용하여 알의 정렬 및 고정에 도움을 줄 수 있는 알 배열판(egg liner) 및 접착제 줄눈판(glue drawer)을 3DCADian 프로그램을 이용하여 모델링하고, Fusion 360를 이용하여 3차원 도면을 제작 후 프린팅하여 제작하였다. 제작된 두 도구를 이용하여 슬라이드 글라스에 알을 고정하고, 소요된 시간을 분석한 결과 도구를 사용하지 않았을 때에 비하여 2가지 도구를 이용했을 때 작업시간이 약18.6% 감소하였으며, 연구자의 작업 편의성을 향상시키고 마이크로인젝션을 위한 현미경 및 로봇 팔(manipulator) 조작을 유리하게 하였다. 따라서 알의 배열 수 또는 조작 편의성을 개선할 수 있는 추가적인 연구 및 개량이 이루어진다면, 알 배열판 및 접착제 줄눈판이 누에 형질전환 효율성 개선 및 다른 산업 곤충의 형질전환 연구에도 이용될 수 있을 것으로 판단된다.

• 동력기계공학회지
• /
• 제17권3호
• /
• pp.65-71
• /
• 2013

The under rail slide is the latest device to make accurate rectilinear reciprocating motion. In these day, 3-point type is used mostly for the products requiring high strength and performance such as refrigerator door guide or furniture drawer guide. However, It is all imported from foreign countries due to lack of the roll forming technique to make 3-point type under rail slide in domestic. Therefore, design and manufacturing technology for the 3-point type under rail slide are need to development through systematic study. In this paper, to make center member of 3-point ball-type under rail slide for the refrigerator doors, the roll forming modeling and simulation are performed using Shape-RF software. Tensile test is performed about SCP-1 1/2H for determine the mechanical properties of materials. Interference between the roll and the final shape are predicted from the results of the simulation ; this result show that the desirable performance and usefulness of the designed roll forming process.

• 한국가구학회지
• /
• 제20권1호
• /
• pp.42-51
• /
• 2009

As wine culture becomes popular among the people in modem society, the consumption of wine has increased due to the need to enjoy wine at home. Nonetheless, the development of wine cabinet has not made much progress. In order to compensate such matter, a wine cabinet that satisfies the taste of new generation as well as the need demanded in the modem living space is transcended its simple and solemn image embedded in wooden colored form, which is often found in existing products. First of all, the definition, kind, bottles, and glasses of wine are examined and then a cabinet is developed depending on the design process. The body of the wine cabinet is finished with black lacquer after attaching ash-patterned veneer on MDF and the front plate of the drawer is finished with the colors displayed in Mondrian's painting on MDF. The upper part is designed to store wine glasses and below the wine rack is the space for wine storage considering the overall shape. The storage at the lower part is equipped with drawers of different sizes to emphasize practicability. In conclusion, such a unique design is believed to introduce the importance of design to the domestic furniture market being a foundation for the furniture industry.

• 한국정밀공학회지
• /
• 제26권8호
• /
• pp.96-103
• /
• 2009

The roll forming process is commonly used for the conventional 'Fe' metal products such as a furniture drawer guide or an up-down slide guide. Recently its applications are variously expanded to the sanitary facilities or electronic devices. It is essentially required the cleanness for the high technology application and any corrosion or rust are not allowed. Therefore, in those applications the stainless steel materials are strongly demanded as the substitution of 'Fe' steel. However the mechanical properties of stainless steel are not suitable for forming process compared with those of 'Fe' steel. Up to now, the conventional F.E.M.(Finite Element Method) has been used to analyze and design the roll forming process. The purpose of this research is to obtain the proper production process and the shape of rolls to manufacture the high precision slide rails made of stainless steel material. The commercial program, SHARPE-RF, is used to analyze the entire roll forming process. The results show that the rolling process and the roll design by F.E.M. are useful from the good agreement between the shapes of products estimated by F.E.M. and those of the actual products.

• 한국생활과학회지
• /
• 제16권6호
• /
• pp.1243-1250
• /
• 2007

The purpose of this study was to compare government guidelines and foreign guidelines related to furniture design for elderly. Future elderly will increasingly accustomed to the provisions of improved housing, education and welfare in comparison with our forebears. Also, there will be upgrading and different need for elderly furniture in our market. The results were as follows. The height of bed was based on the height of wheelchair seat, commonly. A adjustable bed was recommended for abled and disabled elderly. A pull-down shelf, drawer, empty space under chest, folding or sliding door in wardrobe and so on were recommended as a elderly furniture. It were good adjustable sink on human scale. There were need the empty space under sink for wheelchair users, one-touch or lever faucet, etc. There have given a little furniture design guidelines for elderly in Korea until now. But those guidelines haven't been considered enough human scale of elderly including wheelchair user. Because the close investigations have not made about abled and disabled elderly for their furniture design. So first of all, the government should be examined elderly physical size more accurately for elderly furniture design. The guideline for elderly furniture design should be for abled elderly and the disabled, too.

• 한국임상수의학회지
• /
• 제20권2호
• /
• pp.229-232
• /
• 2003

Ultrasonographic examination of the stifle joint four clinically and radiographically normal adult dogs was performed before and after inducing the cranial cruciate ligament (CrCL) rupture of the bilateral stifle surgically. At Pre- or post-surgery, the hyperechoic patella ligament and the echogenic infrapatella fat interfered the visualization of the CrCL by the plain scanning method. However when the stifle joint was imaged by the scanning method injecting normal saline within the joint capsule, the hyperechogenic ligament was visualized by the separation of the infrapatella fat and the CrCL and the contrast effect of anechoic saline. When the stifle joint was imaged by the real time scanning method after the induction of the surgical rupture, fluttering of the ligament and anechoic area between the bone and the CrCL was identified due to the lack of tonicity and continuity of the ligament. Enlargement of the ligament because of its increased diameter as well as fluttering of the CrCL and the increased joint space's thickness was visualized. Consequently, confirming fluttering of the CrCL, increased ligament diameter and anechoic region between the CrCL and the bone, ultrasonographic examination is a valuable diagnostic tool as well as cranial drawer test and radiographic examination.

• 대한가정학회지
• /
• 제27권2호
• /
• pp.97-114
• /
• 1989

The purpose of this study is to analyze style and usage of furniture for rural house and to organize the changing process of the furniture. The data were collected from 32 residences in Samga 3-ri village in Youngin Kyungkido by field survey measuring and sketching the furniture were also performed as a supplement of investigation. Qualitative analysis were done by discriptive method. 1) It was found that the major furniture for rural household were storing furniture such as wardrobes, blanket chests, drawer chests, cupboards until 1976. The time when the supportive furniture such as sofa sets and dining sets were purchased on the rural area was after late 1970's. 2) The style of the furniture was investigated through the analysis of the size, material, structure, finishing and ornamentation. The changing process of style was from luxurious look to natural look. Therefore the storing furniture of the rural household showed a state of transition between traditional and modern style. 3) As a result of analyzing the place where the furniture were used, the cupboards showed to move from Marus (the living room area) to Buauks (the kitchens). The wardrobes were mainly used in An-Bangs(the master bedrooms) and Kuhnnun-Bangs(the room opposite the master bedrooms), but the style of those wardrobes were different each other.

• 중환자간호학회지
• /
• 제8권1호
• /
• pp.41-49
• /
• 2015

Purpose: The purpose of this study was to measure the noise levels in intensive care units (ICUs) and to analyze the causes of the noise and patient perceptions of the noise. Methods: Noise levels were recorded in adult ICUs for 24 h over a week from the patients' bedside with a sound level meter. Noise sources were categorized into three groups: medical equipment, health care providers, and the environment. Noises from the environment were recorded in an empty ICUs side room. Perceptions of the noise of 125 patients admitted to the ICUs were recorded using a questionnaire. Results: The mean level of noise in the ICUs was 58.5 dBA (range: 34.2-80.2 dBA). The causes of noise higher than 70 dBA were nebulizers and infusion/syringe pumps among medical equipment, and drawer slamming, phone ringing, and stripping packages of medical fluids among environmental noises. According to the questionnaire, 64.0% of the patients responded that the ICUs were noisy and that they suffered from sleep disturbance because of the noise. Conclusion: Noise is considerably high in ICUs and is an annoying factor for the patients. Most noise sources are adjustable, and we should try to reduce noise whenever possible to make the ICUs environment more pleasant.