• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.446-448
• /
• 2006

DRAM with ECC is used widely and the size of DRAW increases. According to this, DRAM initial time, especially the time to make the whole area typical value, 0, increases. This paper introduces the method that without any additional hardware, using characteristic of DRAM and DRAM controller, minimize that memory initial time. Conservative reordering - it eliminates DRAM read time and makes write buffer used - reduces initial time to make the whole DRAM area 0, by 95.36% for DDR DRAM. 9341% for Rambus DRAM.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.485-486
• /
• 2006

This paper proposes a novel low-cost CMOS temperature sensor for controlling the self-refresh period of a mobile DRAM. In this temperature sensor, ring oscillators composed of cascaded inverter stages are used to obtain the temperature of the chip. This method is highly area-efficient, simple and easy for IC implementation as compared to traditional temperature sensors based on analog bandgap reference circuits. The proposed CMOS temperature sensor was fabricated with 80 nm 3-metal DRAM process. It occupies a silicon area of only about less than $0.02\;mm^2$ at $10^{\circ}C$ resolution with under 5uW power consumption at 1 sample/s processing rate. This area is about 33% of conventional temperature sensor in mobile DRAM.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.11
• /
• pp.45-53
• /
• 2003

This paper describes a Unified Voltage Generator that merges the pumping capacitors of boosted voltage generator (VPP) and substrate voltage generator (VBB) for DRAM. This unified voltage generator simultaneously supplies VPP and VBB voltages by using one pumping capacitor and one oscillator. The proposed generator is realized by 0.14${\mu}{\textrm}{m}$DRAM process. The generator reduces the power consumption to 30%, the area of total generator to 40% and the area of pumping capacitor to 29.6%, and improves the pumping efficiency to 13.2% at 2.0V supply voltage. In addition, the generator adopts the charge recycling technique for precharging the pumping capacitor during the period of precharge, thatcan reduces the precharge current to 75%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.793-798
• /
• 2016

In this work, the memory window characteristics of vertical nanowire device with asymmetric source and drain was analyzed using bipolar junction transistor mode for 1T-DRAM application. A gate-all-around (GAA) MOSFET with higher doping concentration in the drain region than in the source region was used. The shape of GAA MOSFET was a tapered vertical structure that the source area is larger than the drain area. From hysteresis curves using bipolar junction mode, the memory windows were 1.08V in the forward mode and 0.16V in the reverse mode, respectively. We observed that the latch-up point was larger in the forward mode than in the reverse mode by 0.34V. To confirm the measurement results, the device simulation has been performed and the simulation results were consistent in the measurement ones. We knew that the device structure with higher doping concentration in the drain region was desirable for the 1T-DRAM using bipolar junction mode.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.11
• /
• pp.1-6
• /
• 2002

This study is about optimization of Laser Repair Condition in EDS Line to improve AC and DC characteristic of high speed DRAM. The margin of AC parameter can be improved by forcing the proper DC generator levels and also improved by cutting the optional fuse about characteristics.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.2
• /
• pp.76-82
• /
• 2003

The robust stack storage node and sufficient cell capacitance for high performance is indispensable for 90 nm DRAM capacitor. For the first time, we successfully demonstrated MIS capacitor process integration for 90 nm DRAM technology. Novel cell layout and integration technology of 90 nm DRAM capacitor is proposed and developed, and it can be extended to the next generation DRAM. Diamond-shaped OCS with 1.8 um stack height is newly developed for large capacitor area with better stability. Furthermore, the novel $Al_2O_3/HfO_2$ dielectric material with equivalent oxide thickness (EOT) of 25 ${\AA}$ is adopted for obtaining sufficient cell capacitance. The reliable cell capacitance and leakage current of MIS capacitor is obtained with ~26 fF/cell and < 1 fA/ceil by $Al_2O_3/HfO_2$ dielectric material, respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.4
• /
• pp.833-837
• /
• 2012

This paper proposes a DRAM data retention time enhancement method that minimizes silicon loss and undercut at STI sidewall by reducing the SC1 (Standard Cleaning) time. SC1 time optimization debilitates the parasitic electric field in STI's top corner, which reduces an inverse narrow width effect to result in reduction of channel doping density without increasing the subthreshold leakage of cell Tr. Moreover, it minimizes the electric field in depletion area from cell junction to P-well, increasing yield or data retention time.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.7
• /
• pp.76-81
• /
• 2011

A new via cutting structure in 2-layer DRAM package substrate has been fabricated to lower its power distribution network(PDN) impedance. In new structure, part of the via is cut off vertically and its remaining part is designed to connect directly with the bonding pad on the package substrate. These via structure and substrate design not only provide high routing density but also improve the PDN impedance by shortening effectively the path from bonding pad to VSSQ plane. An additional process is not necessary to fabricate the via cutting structure because its structure is completed at the same time during a process of window area formation. Also, burr occurrence is minimized by filling the via-hole inside with a solder resist. 3-dimensional electromagnetic field simulation and S-parameter measurement are carried out in order to validate the effects of via cutting structure and VDDQ/VSSQ placement on the PDN impedance. New DRAM package substrate has a superior PDN impedance with a wide frequency range. This result shows that via cutting structure and power/ground placement are effective in reducing the PDN impedance.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.4
• /
• pp.252-256
• /
• 2006

A low-power ECC check bit generator is presented with competent DRAM implementation with minimal speed loss, area overhead and power consumption. The ECC used in the proposed scheme is a variant form of the minimum weight column code. The spatial and temporal correlations of input data are analyzed and the input paths of the check bit generator are ordered for the on-line adaptable power savings up to 24.4% in the benchmarked cases. The chip size overhead is estimated to be under 0.3% for a 80nm 1Gb DRAM implementation.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.530-533
• /
• 1998

In this paper, a new scheme of a boosted voltage generator (BVG) is designed for low powr DRAM's. The designed BVG can supply stable $V_{pp}$ using a new circuit operting method. This method controls charge pumping capability by switching the supply voltage and ring oscillator frequency of driving circuit, so the BVG can save area and reduce the powr dissipation during $V_{pp}$ maintaining period. The charge pumping circuit of the BVG suffers no $V_{T}$ loss and is to be applicable to low-voltage DRAM's. $V_{pp}$ level detecting circuit can detect constant value of $V_{pp}$ against temperature variation. The level of $V_{pp}$ varies -0.55%~0.098% during its maintaining period. Charge pumping circuit can make $V_{pp}$ level up to 2.95V with $V_{cc}$ =1.5V. The degecting level of $V_{pp}$ level detecting circuit changes -0.34% ~ 0.01% as temperature varies from -20 to 80.deg. C. The powr dissipation during V.$_{pp}$ maintaining period is 4.1mW.W.1mW.