• 한국농공학회논문집
• /
• 제54권6호
• /
• pp.169-176
• /
• 2012

This study describes the estimation of upstream ungauged watershed streamflow using downstream discharge data. For downstream Dongchon (DC) and upstream Kumho (KH) water level stations in Kumho river basin ($2,087.9km^2$), three methods of Soil and Water Assessment Tool (SWAT) modeling, drainage-area ratio method and regional regression equation were evaluated. The SWAT was calibrated at DC with the determination coefficient ($R^2$) of 0.70 and validated at KH with $R^2$ of 0.60. The drainage-area ratio method showed $R^2$ of 0.93. For the regional regression, the watershed area, average slope, and stream length were used as variables. Using the derived equation at DC, the KH could estimate the flow with maximum 41.2 % error for the observed streamflow.

• 한국수자원학회논문집
• /
• 제40권2호
• /
• pp.113-124
• /
• 2007

갈수량(low flow)은 과거 자연상태 하천에서 갈수기에 흘렀던 유량으로서 자연과 사람이 공유할 수 있는 최소한의 유량이며, 이수측면에서 하천수의 공급능력을 평가하여 취수량을 설정하는 기준 유량이다. 일본과 우리나라에서는 평균갈수량과 기준갈수량을, 미국과 영국 등에서는 10년빈도 7일 갈수량($7Q_{10}$)을 갈수량 지표로 사용하고 있다. 본 연구에서는 위의 세 지표를 관측자료와 모의 생성자료를 이용하여 비교하고 고찰하여 보았다. 갈수량 산정을 위해서는 과거의 관측 유량자료가 필요하나 국내에는 수위관측시설이 한정되어 있을 뿐 아니라 홍수기에 비해 갈수기 자료가 턱없이 부족하여 갈수량 산정에 많은 어려움을 겪고 있다. 국내에서는 대부분 비유량법(drainage-area ratio method)으로 미계측유역의 갈수량을 산정하고 있다 본 연구에서는 미계측유역(ungauged basin)의 갈수량을 산정하기 위한 방법으로 비유량법과 지역회귀기법(regional regression method), 기저유량상관법(baseflow correlation method)을 국내에 적용하여 보고, 각 방법의 적용시 지침과 국내에 적합한 갈수량 산정방법을 제시하였다.

• 한국안전학회지
• /
• 제29권1호
• /
• pp.31-36
• /
• 2014

In this study, the methodologies for evaluating the low-flow at the ungauged watershed are reviewed and assessed. The ungauged watershed can be classified into different situations such as the partially recorded watershed and the completely ungauged watershed. The extension method and the percentile method are used to evaluated the low-flow at the partially recorded watershed. The drainage-area ratio method and the regional regression method are used at the completely ungauged watershed. These four methods are applied and validated based on the hydrological and geometric data acquired from unit watersheds in Han River basin for TMDLs. In case of partially recorded watershed, the values of low-flow evaluated by the extension method are in better agreement with measured flow-rate rather than those by the percentile method. In case of completely ungauged watershed, the drainage-area method is broadly used to estimate the low-flow. It must be paid attention to consider the treated sewage discharge produced at watersheds when applying the method.

• 한국물환경학회지
• /
• 제32권6호
• /
• pp.562-569
• /
• 2016

Recently, Low Impact Development (LID) is being used in Korea to control urban runoff and nonpoint source pollution. In this study, we evaluated the reduction of surface runoff from a study area, as the effect of connecting three bioretention as LID-BMP. Surface runoff and storage volume of bioretention is estimated by the Curve Number (CN) method. In this study, the storage volume of bioretention is divided by the volume of surface runoff and precipitation which directly enters the bioretention. The ratio of captured surface runoff volume to storage volume is highly influenced by the ratio of drainage area to surface area of bioretention. The high bioretention surface area-to-drainage area ratio captures more surface runoff. The ratio of 1.2 captures 51~54% of the total surface runoff, ranging from 5-30cm of bioretention depth; a ratio of 6.2 captures 81~85%. Three connected bioretentions could therefore captures much more runoff volume, ranging from $35.8{\sim}167.3m^3$, as compared to three disconnected bioretentions at their maximum amount of precipitation with non-effluent from the connecting three bioretentions. Hence, connecting LID-BMPs could improve the removal efficiencies of surface runoff volume and nonpoint source pollution.

• 한국수자원학회논문집
• /
• 제37권3호
• /
• pp.249-255
• /
• 2004

농업용수 회귀율을 조사하기 위하여 2003년 관개기 동안 많은 실측을 수행하였다. 본 연구지역은 경상남도 창녕군에 위치한 대암양수장 유역일원이다. 관개용수를 공급하기위하여 건설된 대암 양수장 유역 내 논에 대하여 물수지분석을 실시하였다. 본 연구지역에서의 일 강우량 자료를 수집하였으며, 또한 관개율, 배수율, 침투 및 증발산을 실측하였다. 관개량과 배수량은 기록형수위계(GTDL-L10)를 설치하여 관계기 동안 지속적으로 관측하였다 침투 및 증발산은 직경 3mm PVC 감수심계 및 직경 200mm PVC 침투계를 이용하여 측정하였다. 총관개량 및 총 지표배수량은 654.7mm와281.2mm로 나타났으며, 총 침투량과 총증발산량은 각각 36.0mm 및 160.0mm였고, 일평균 증발산량은 4.3mm/d 였다. 신속회귀율과 지연회귀율은 각각 43.0% 및 5.5%로 전체회귀율은 48.5 %로 나타났다. 따라서, 본 시험지구에서 공급된 관개용수량이 설계기준보다 훨씬 많은 양의 관개용수를 공급하고 있음을 알 수 있었다. 이는 적정한 용수관리원칙 보다는 지역주민들의 요구에 의한 과다공급으로 인한 부적적한 용수관리에 기인하는 것으로, 추후에 농업용수설계기준을 현실에 맞게 변경해야함을 의미한다.

• 한국농공학회지
• /
• 제39권2호
• /
• pp.134-142
• /
• 1997

This study was performed to evaluate the drain runoff characteristics from one paddy field, and to provide the basic data required for the determination of flood discharge and unit drainage water for drainage improvement and farmland consolidation. For this purpose, under the assumption that drain discharge from paddy field was similar to outflow of reservoir, runoff model based on storage equation was applied to the experimental field, and simulated results were compared to the measured discharge at weir point. To estimate effective storage volume of paddy field with water depth, 4 regression formula were examined such as linear, exponential, power, and combined. From the observed runoff characteristics, it was shown to be 3.3~16.3${\ell}$/sec in weir discharge, 57.2~98% in runoff ratio, and relative error of simulated result was 3.0~39.4%, 8.5 ~56.0 % for peak flow and runoff ratio, respectively. Curve number by SCS method was calculated as mean value of 96.4 using measured rainfall and runoff data, it was considered relatively high because paddy field has generally flooding depth contrary to the upland watershed area.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.974-981
• /
• 2005

Because general laboratory tests for sand compaction pile method including unit-cell test device have fixed outside diameter, as area replacement ratio increase, diameter of sand pile increase. These condition can bring about overestimation of stiffness of composite ground. In addition, existing large soil box which consist of bellows type loading plate can occur serious mistake in checking the amount of drained water because there are additional drainage along the inside wall in device. Overcoming these shortcoming, this paper developed modified large scale soil box consist of piston type load plate. In this study, using this device, series of modified large scale soil box tests were performed, and investigated the settlement and stress transportation characteristics with area replacement ratio in sand compaction pile method.

• 한국물환경학회지
• /
• 제26권5호
• /
• pp.761-767
• /
• 2010

This study introduces a model of territorial analysis on Chungcheongnam-do Nonsan-chun valley area, which gives an example of a method of selecting the management area for non-point pollution source from land use to help eliminate its source. High discharge load per unit area signify high level of land ratio with high level of basic unit of development load (including factory sites, school sites, roadways), which mean that there are a significant level of urbanization. It is these areas with the examination of the water quality of the nearby river that should be considered as the management area for non-point pollution source. Thus, the management area for non-point pollution source should be sought in areas with high discharge load per unit area and high density of water pollution area. When level of drainage is high the pollution density level is relatively lower, and when the level of drainage is low the density level is relatively higher. The level of pollution from non-point pollution source is much lower with more water flowing through. The possible non-point pollution source areas that were selected with these standards were then examined with the distance from the river, the slope angle, land usage, elevation, BOD discharge density load, T-N discharge density load, T-P discharge density load, and were given a level one through five. Out of the possible areas Nonsan-si Yeonmu-eup Anshim-li was the densest area, and it was given level one. The level one area should be examined further with the field analysis to be selected as the actual management area for non-point pollution source.

• Membrane and Water Treatment
• /
• 제10권1호
• /
• pp.19-28
• /
• 2019

To minimize the impact of urbanization, accurate performance evaluation of Low Impact Development (LID) facilities is needed. In Korea, the method designed to evaluate large-scale non-point pollution reduction facilities is being applied to LID facilities. However, it has been pointed out that this method is not suitable for evaluating the performance of relatively small-scale installed LID facilities. In this study, a new design formula was proposed based on the ratio of LID facility area and contributing drainage area, for estimating the Stormwater Interception Ratio (SIR) for LID facilities. The SIR was estimated for bio-retentions, infiltration trenches and vegetative swales, which are typical LID facilities, under various conditions through long-term stormwater simulation using the LID module of EPA SWMM. Based on the results of these numerical experiments, the new SIR formula for each LID facility was derived. The sensitivity of the proposed SIR formula to local rainfall properties and design variables is analysed. In addition, the SIR formula was compared with the existing design formula, the Rainfall Interception Ratio (RIR).

• 대한토목학회논문집
• /
• 제36권3호
• /
• pp.407-416
• /
• 2016

본 연구에서는 미계측 유역의 평균갈수량 추정을 위한 지역회귀모형을 개발하고자 하였다. 12개 다목적댐과 4개의 용수댐에서 관측된 조절되지 않은 유입량 자료로부터 평균갈수량을 산정하였고, 이를 유역면적, 유역경사, 유역밀도, 연평균강수량, 유출곡선지수 등의 유역특성인자와의 상관분석을 통해 다양한 형태의 지역회귀모형을 개발하였다. 평균갈수량의 관측값과 추정값의 비교를 통해 각 회귀모형의 성능을 평가하였고, 유역면적, 연평균강수량, 유출곡선지수를 설명변량으로 하는 회귀모형이 가장 우수한 성능을 보였다. 또한 비유량법과 기존에 개발된 기존회귀모형과의 비교를 통해서 본 연구에서 개발한 모형의 적용성이 가장 우수한 것으로 분석되었다.