• Journal of Communications and Networks
• /
• v.10 no.4
• /
• pp.412-421
• /
• 2008

We observe simultaneous transmission of relay stations (RSs) allowed in current IEEE 802.16j draft standard for multi-hop relay networks may involve severe interference among the RSs, hence leading to throughput degradation. Allowing only 1/3 of the RSs to simultaneously transmit instead of 1/2 RSs as in the current draft standard reduces the interference but results in reduced throughput. To remedy this problem, we devise schemes to incorporate network coding at link-layer level (decode-and-forward) into the simultaneous transmission of RSs. Data movement is rearranged to maximize coding gain. Formula is derived to dictate exact movement of packets traveling between base station (BS) and mobile stations (MSs) via intermediate RSs. The frame structure in the current IEEE 802.16j draft standard does not allow broadcast needed for network coding. We devise a new frame structure which supports the broadcast. A new R-MAP (pointers to the burst data) is introduced to implement the broadcast. Since our new frame structure is used only for BS to RS or RS to RS communication, our schemes retain backward compatibility with legacy MSs based on IEEE 802.16e standard. Simulation based on simple configuration of RSs shows considerable improvement in terms of system throughput and round trip delay. For a 4-hop relay network with 1 BS and 4 RSs with symmetric traffic in uplink (UL) and downlink (DL), throughput is improved by 49% in DL and by 84% in UL traffic compared with IEEE 802.16j draft standard under the assumption that omni-directional antennae are used in BS and RSs.

• Review of KIISC
• /
• v.5 no.1
• /
• pp.85-100
• /
• 1995

지난 호에 이어 상대방이 자신이라고 주장한 실체가 정말 그 실체인지를 인증하기 위한 기법을 표준화하는 과제 중의 세번째로 "공개키 알고리듬을 이용한 인증"을 소개한다. 이 과제는 1990년 CD(Committee Draft), 1992년 DIS(Draft for International Standard)가 되었고 1993년에 IS(International Standard)가 되었으며 1998년에 1차 검토가 있을 예정이다.가 있을 예정이다.

• Review of KIISC
• /
• v.5 no.3
• /
• pp.107-121
• /
• 1995

제 5권 제 1호에 이어 상대방이 자신이라고 주장한 실체가 정말 그 실체인지를 인증하기 위한 기법을 표준화하는 과제 중의 네번째로 "암호학적 화인 함수를 이용한 인증"을 소개한다. 이 과제는 제 2부인 "대칭형 암호기술을 이용한 인증"과 많이 유사하므로 쉽게 진행되어 1993년에 CD(Committee Draft), 1994년 DIS(Draft for International Standard)가 되었고 1995년에 IS(International Standard)가 되었으며 1999년에 1차 검토가 있을 예정이다.99년에 1차 검토가 있을 예정이다.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.18 no.4
• /
• pp.463-471
• /
• 2011

Purpose: The purpose of this study was to develop nursing practice guidelines for water treatment system used in hemodialysis and to evaluate the guidelines by applying them in practice. Method: The first draft for the guidelines was developed based on advice and recommendations obtained from procedure review of critical literature. The draft was modified through evaluation by an expert group and pilot application to practice. The final draft was evaluated by the expert group using the AGREE instrument (Appraisal of Guidelines for Research and Evaluation). Results: For the pilot test using the draft guidelines, 144 samples were collected from the water treatment system and hemodialysis machines. Results showed no bacteria. Endotoxin tests and chemical tests passed the criteria. After revision of the draft guidelines and additions to the draft guidelines, the final draft was confirmed. The quality of the final draft was evaluated by 4 experts using the AGREE instrument. The mean standard score was 76.9% for the 19 items. Conclusion: The clinical guidelines developed in this research can be utilized as systematic and scientific guidelines for water treatment systems used in hemodialysis. In addition, the results of the research can contribute to improving care services.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.04a
• /
• pp.417-426
• /
• 2000

This paper introduces the ISO 3010 which is the design standard for seismic action of International Standard Organization. Specially this paper focuses on the philosophical background and the weakness of ISO 3010,. The ISO 3010\ulcorner(Bases for design of structures-Seismic action on structure) were made in 1998 by the efforts of ISO/TC98 which is one working group of ISO. TC98 deals with " Bases for design of structures" in the field of architectural and civil engineering. The revised Committee Draft ISO/CD 3010 was made in February 1999. Even if ISO 3010 has not been complete yet this study carry out critical review of this committee draft.tee draft.

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.3
• /
• pp.135-145
• /
• 2009

This study surveyed standardization activities of the International Standard Organization (ISO) Technical Committee 159 (TC 159) (ergonomics) in the year 2008. The subcommittee 1 (SC 1) dealing with general ergonomics principles produced one committee draft (CD). The subcommittee 3 (SC 3) dealing with anthropometry and biomechanics systematically reviewed two ISO standards issued in 2003 and 2004 respectively. The subcommittee 4 (SC 4) dealing with ergonomics of human system interaction issued 11 final draft international standards (FDIS), 3 draft international standards (DIS), 4 CDs, and 4 new work item proposals (NWIP). The SC 4 also systematically reviewed 10 international standards due on the year 2008. The subcommittee 5 (SC 5) dealing with ergonomics of the physical environment issued one FDIS, 3 CDs, and one NWIP. This paper summarized the major features of the FDIS approved by each subcommittee of TC 159 for publication in the year 2008.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.1
• /
• pp.42-46
• /
• 2012

The ISO document of ISO/TC/190/SC3/WG11/N11 is a working draft of international standard (WD) dealing with analytical method for the determination of explosives and related compounds using high performance liquid chromatography. The scope of this WD covers the storage of samples, preparing test portion, extraction and instrumentation. The main purpose of this study was to improve the extraction conditions which were already adopted in the WD. For this purpose, mechanical shaking method could be corresponded up to 18 hours of ultrasonic bath extraction in the WD was tested. Methanol was also tested with the intention of being added as an extracting solvent other than acetonitrile in the WD. According to the results, 16 hours of mechanical shaking method showed statistically the same effectiveness as that of 18 hours of ultrasonic bath extraction. In case of extracting solvent, methanol also showed statistically the same extraction capability as acetonitrile for DNB, TNT, 2-A-DNT and 2,4-DNT. However, the recovery rate of TNB with methanol extraction was 40% higher than that of acetonitrile extraction. Through adding mechanical shaking method into committee draft (cf. the next stage draft of the WD during the process for making international standard), ISO standard of analyzing explosives and related compounds in soil would become more useful in dealing with huge number of field samples in the laboratory. In other aspect, adopting methanol as an alternative extracting solvent would be very effective in the terms of exchangeability with GC-ECD/MS method which is being developed by German experts.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.5
• /
• pp.535-549
• /
• 1998

A numerical study for performance analysis of a counterflow type forced draft tower and natural draft cooling tower has been performed based on the method using the finite volume method with non-orthogonal body fitted and non-staggered grid system. For solving the coupling problem between water and air, air enthalpy balance, moisture fraction balance, water enthalpy balance, and water mass balance equations are solved with Navier-Stoke’s equations simultaneously. For the effect of turbulence, the standard k-$\varepsilon$ turbulent model is implied in this analysis. The predicted result of the present analysis is compared with the experimental data and the commercial software result to validate the present study, The predicted results show good agreement with the experimental data and the commercial software result. To investigate the influence of the cooling tower design parameters such as approach, range and wet bulb temperature, parametric studies are also peformed.

• Journal of Radiation Industry
• /
• v.9 no.1
• /
• pp.29-35
• /
• 2015

Radiation technology is the one for developing new products or processes by applying radiation or for creating new functions in industry, research and medical fields, and its application is increasing consistently. For securing an advanced technology competitiveness, it is required to create a new added value by information consumer through providing an efficient system for supporting information, which is the infrastructure for research and development, contributed to its collection, analysis and use with a rapidity and structure in addition to some direct research and development. Provision of the management structure for information resources is especially crucial for efficient operating the system for supporting information in radiation technology, and then a standard classification structure of information must be first developed as the system for supporting information will be constructed. The standard classification structure has been analyzed by reviewing the definition of information resources in radiation technology, and those classification structures in similar systems operated by institute in radiation and other scientific fields. And, a draft version of the standard classification structure has been then provided as 7 large, 25 medium and 71 small classifications, respectively. The standard classification structure in radiation technology will be developed in 2015 through reviewing this draft version and experts' opinion. Finally, developed classification structure will be applied to the system for supporting information by considering the plan for constructing this system and database, and requirements for designing the system. Furthermore, this structure will be designed in the system for searching information by working to the individual need of information consumers.

• 월간산업보건
• /
• s.70
• /
• pp.42-43
• /
• 1994