• 한국정밀공학회지
• /
• 제25권11호
• /
• pp.83-89
• /
• 2008

The Effect of Space Velocity(SV) on NOx conversion rate was performed to develop NOx reduction after-treatment system. SV is calculated from engine exhaust gas volume and SCR catalyst volume. Found the Urea injection duty of maximum efficiency for NOx conversion if increase SV, NOx Conversion rate is down. Especially, when SV is more than $110,000h^{-1}$, NOx conversion rate decrease suddenly. Same case, if SV is lower than $40,000h^{-1}$, NOx conversion rate is down. Also, the characterization of Urea-SCR system was performed. Three candidate injectors for injecting Urea were tested in terms of 속 injection rate and NOx reduction rate. The performances of SCR catalytic converter on temperature were investigated. The performance of Urea-SCR system was estimated in the NEDC test cycle with and without EGR. It was found that nozzle type injector had high NOx conversion rate. SCR catalytic converter had the highest efficiency at the temperature of $350^{\circ}C$. EGR+Urea-SCR system achieved NOx reduction efficiency of 73% through the NEDC test cycle.

• 한국통신학회논문지
• /
• 제1권1호
• /
• pp.23-31
• /
• 1976

VHF 및 UHF 챠넬의 TV 信號는 映像 및 音聲을 포함한 6MHz의 대역폭으로 챠넬變換 된후 直線增幅器를 통해 재 送信될 때 搬送波付近의 兩側波帶傳送領域에서 出力振幅周波數特性에 不自然스러운 變化가 생겨 화질에 影響을 주는수가 있다. 이러한 現像은 發振器로 부터의 不要信號로 因한 不要下側帶波의 發生등 問題가 되는 要因인 트랜지스터 直線增幅器의 非直線性, MIXER 회로에서의 상호변조 歪 AM-PM 變換 및 envelope delay 特性 등을 고려하여 出力特性을 구한 결과 主原因은 非直線性에 의한 것이였으며 實驗結果로서는 非直線性의 主因으로 Bias 조건의 불합리 및 發振器로 부터의 不要周波數의 發生이 가장 큰 原因으로 나타났다. 특히 인접信號에 對한 相互變調歪 및 不要信號發生은 Up conversion의 경우가 Down Conversion의 경우보다 현저히 감소됨을 확인하였고 發振器로부터의 spurious가 system에 영향을 주지 않는 方案을 모색하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.827-830
• /
• 2003

This paper proposes an area-efficient FIR filter architecture for sampling rate conversion of hi-fi audio data. Sampling rate conversion(SRC) block converts audio data sampled at 96KHz down to 48KHz sampled data and vice versa. 63-tap FIR filter coefficients have been synthesized that gives 100dB stop band attenuation and 5.2KHz transition bandwidth. Time-shared filter architecture requires only one multiplier and accumulator for 63-tap filter operation. This results in huge hardware saving of up to 10~19 times smaller compared with traditional FIR structure.

• 전기학회논문지
• /
• 제64권3호
• /
• pp.433-437
• /
• 2015

We have designed and fabricated a low power and high linearity up down convertor for wireless repeaters using $0.35{\mu}m$ SiGe Bipolar CMOS technology. Repeater is composed of a wideband up/down converting mixer, programmable gain amplifiers (PGA), input buffer, LO buffer, filter driver amplifier and integer-N phase locked loop (PLL). As of the measurement results, OIP3 of the down conversion mixer and up conversion mixer are 32 dBm and 17.8 dBm, respectively. The total dynamic gain range is 31 dB with 1 dB gain step resolution. The adjacent channel leakage ratio (ACLR) is 59.9 dBc. The total power consumption is 240 mA at 3.3 V.

• Journal of Power Electronics
• /
• 제14권2호
• /
• pp.203-216
• /
• 2014

In the conventional dc-dc converter, a pair of additional diode and the adjacent passive component capacitor/inductor can be added to the circuit with an X-shape connection, which generates a family of new topologies. The novel circuits, also called diode-assisted dc-dc converter, enhance the voltage boost/buck capability and have a great potential for high step-up/step-down power conversions. This paper mainly investigates and compares conventional dc-dc converter and diode-assisted dc-dc converter in wide range power conversion from the aspects of silicon devices, passive components requirements, electro-magnetic interference (EMI) and efficiency. Then, a comprehensive comparison example of a high step-up power conversion system was carried out. The two kinds of boost dc-dc converters operate under the same operation conditions. Mathematical analysis and experiment results verify that diode-assisted dc-dc converters are very promising for simultaneous high efficiency and high step-up/step-down power conversion in distributed power supply systems.

• 한국재료학회지
• /
• 제25권9호
• /
• pp.475-479
• /
• 2015

$YNbO_4:Yb^{3+}/Er^{3+}$ is synthesized using a solid-state reaction process with a LiCl flux. The effects of the Er/(Yb+Er) ratios ($R_{Er}$) on the up-conversion (UC) and down-conversion (DC) spectra are investigated. The XRD data confirm that the $Yb^{3+}$ and $Er^{3+}$ ions are fully substituted for the $Y^{3+}$ sites. The UC emission spectra activated by 980 nm consists of green and red emission bands, which originate from the $Er^{3+}$ ions through an energy transfer (ET) process from $Yb^{3+}$ to $Er^{3+}$. The UC emission intensity depends on the $R_{Er}$ value, and the findings demonstrate that $R_{Er}{\leq}0.14$ is suitable for an effective UC process. The DC emission spectra under 269 nm radiation of the synthesized powders exhibits not only a strong blue emission assigned to the $[NbO_4]^{3-}$ niobates, but also green peaks that originate from the $Er^{3+}$ ions through an ET process between $[NbO_4]^{3-}$ and $Er^{3+}$.

• 한국세라믹학회지
• /
• 제39권9호
• /
• pp.835-839
• /
• 2002

Micro-Pulling Down(${\mu}$-PD)법을 이용하여 직경 1 mm, 길이 30∼35 mm의 $Er_2O_3$와 MgO가 첨가된 화학양론조성 $LiNbO_3$단결정을 성장하였다. 성장된 결정의 $Er_2O_3$와 MgO 첨가에 따른 up-conversion 특성의 변화 및 MgO 첨가량이 광손상에 미치는 영향을 관찰하기 위해 투과율을 측정하였다. 또한 $LiNbO_3$ 단결정 내의 결함유무를 광학현미경을 이용하여 관찰하였고, Electron Probe Micro Analysis(EPMA)를 이용하여 결정 내에 $Er_2O_3$와 MgO가 균일하게 분포되어있음을 확인하였다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제2C권5호
• /
• pp.273-278
• /
• 2002

Even though the modulating signal frequency of the light is too high to detect directly, the signal can be extracted by frequency conversion at the same time as the detection by means of the non-linearity of the APD. An analysis is presented for super-high-speed optical demodulation by an APD with electronic mixing. A normalized gain is defined to evaluate the performance of the frequency conversion demodulation. The nonlinear effect of the internal capacitance was included in the small signal circuit analysis. We showed theoretically and experimentally that the normalized gain is dependent on the down converted difference frequency component. In the experiment, the down converted different frequency outputs became larger than the directly detected original signal for the applied local signal of 20㏈m.

• 한국전자파학회논문지
• /
• 제12권1호
• /
• pp.65-70
• /
• 2001

본 연구에서는 CDMA 단말기요 Receiver MMIC를 설계하였다. 전체회로는 저잡음 증폭기, 하향 주파수 혼합기, 중간주파수 증폭기 그리고 바이어스 회로로 구성된다. 바이어스회로는 문턱전압과 전원접압의 변화에 대해 보상동작을 한다. 제안된 토폴리지는 높은 선형성과 저잡음 특성을 가진다. 설계결과는 다음과 같다. 전체 변환이득은 28.5 dB, 저잡음 증폭기의 압력은 IP3는 8 dBM, 하향주파수 혼합기의 압력 IP3는 0 dBm 이며 전체회로의 소모전류는 22.1 mA이다.

• ETRI Journal
• /
• 제46권2호
• /
• pp.238-249
• /
• 2024

Equivalent-time sampling can improve measurement or sensing systems because it enables a broader frequency band and higher delay resolution for periodic signals with lower sampling rates than a Nyquist receiver. Meanwhile, a digital down-conversion (DDC) technique can be implemented using a straightforward radio frequency (RF) circuit. It avoids timing skew and in-phase/quadrature gain imbalance instead of requiring a high-speed analog-to-digital converter to sample an intermediate frequency (IF) signal. Therefore, when equivalent-time sampling and DDC techniques are combined, a significant synergy can be achieved. This study provides a parameter design methodology for optimal equivalent-time sampling using DDC.