• Journal of Korea Foundry Society
• /
• v.17 no.3
• /
• pp.245-251
• /
• 1997

Solderability, interfacial reaction and mechanical properties of joint between Sn-Bi-Ag base solder and Cu-substrate were studied. Solders were subjected to aging treatments to see the change of mechanical properties for up to 30 days at $100^{\circ}C$, and then also examined the changes of microstructure and morphology of interfacial compound. Sn-Bi-Ag base solder showed about double tensile strength comparing to Pb-Sn eutectic solder. Addition of 0.7wt%Al in the Sn-Bi-Ag alloy increase spread area on Cu substrate under R-flux and helps to reduce the growth of intermetallic compound during heat-treatment. According to the aging experiments of Cu/solder joint, interfacial intermetallic compound layer was exhibited a parabolic growth to aging time. The result of EDS, it is supposed that the soldered interfacial zone was composed of $Cu_6Sn_5$.

• Korean Journal of Metals and Materials
• /
• v.49 no.6
• /
• pp.440-447
• /
• 2011

To improving the mechanical properties of Mg alloys at high temperature, we investigated the mechanical properties at high temperature and the change of microstructure of Mg-6 wt%Zn-0.4 wt%Mn and Mg-6 wt%Zn-0.4 wt%Mn-1 wt%Ag alloys on age treatment that have a stable MgZn phase at high temperature and $AgMg_4$ improving yield stress. In order to predict thermodynamic data of Mg alloys, a phase diagram and precipitation phase were calculated using a thermodynamic program, and it was confirmed that the MgZn and $AgMg_4$ phase existed as main precipitation in this alloys. The experimental data examined using DSC and XRD were comparable with the calculated data for reliability. In order to analysis the microstructure and precipitate phase during aging treatment, it was measured by SEM/EDS and TEM. Lastly, mechanical properties of the MgZn and $AgMg_4$ phase were measured by a tensile test at high temperature.

• Journal of the Korean Society for Heat Treatment
• /
• v.12 no.4
• /
• pp.303-312
• /
• 1999

An investigation of the CrMoV rotor steel weldment which experienced by cyclic thermal aging heat treatment and as-received condition was performed. This evaluation was carried out to confirm whether this type of weldment is appropriate for the service environment in terms of microstructural examinations, microhardness measurements and tensile tests. The cyclic thermal aging heat treatment, containing continuous heating and cooling thermal cycle was programmed to simulate the real rotor service condition. The heat treatment was performed for 40 cycles(5920hrs). The results indicated that the weldment was composed of 4 different regions such as heat affected zone of the base metal, butter weld(initial weld), full thickness weld(final weld) and the base metal. The double welding process was applied to eliminate the susceptibility of reheat cracking at heat affected zone of base metal. The grain refinement at the HAZ due to the welding process could reduce the possibility of cracking susceptibility, but its tensile properties was appeared to be low due to the weld metal in as-received condition. The benefit effect, grain refinement was extended with carbides coarsening during the cyclic thermal aging heat treatment. However the poor mechanical properties of the weldment was more degraded as undergoing the heat treatment.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.6
• /
• pp.109-118
• /
• 2004

The consolidation of clay occurs with time lag, and this kind of lag can be separated into plastic lag and hydraulic lag. In this study, CRS tests were performed to research the effect of original secondary consolidation of the clay with respect to the characteristics of consolidation. Test results showed that plastic time lag was one of the key factors to get the preconsolidation pressure, and suggested the formula of the Quasi-preconsolidation pressure obtained from the relationship between consolidation time lag and consolidation pressures. In addition though the characteristics of coefficient of consolidation show a wide range of values, after passing the double preconsolidation point, it showed the tendency to converge into the constant value. The coefficient of permeability in normally consolidated state is related to its void ratio, and the permeability variables, n and $C_1$ were determined by the test results using the equation suggested by Samarasinghe. et. al. And then the equation was compared with the Kozeny-Carman's equation. Because of delayed compression caused by consolidation time lag, aging effect could be also found in the relationship between coefficient of permeability and void ratio.

• Applied Microscopy
• /
• v.25 no.1
• /
• pp.1-14
• /
• 1995

The purpose of this study was to investigate the main sensory trigeminal nucleus in the aging rat brain by means of electron microscope. Male Sprague-Dawley rats, two (control group) and thirty six (aging group) months of age, were used. These animals were sacrificed by perfusion fixation with 2.5% glutaraldehyde-2.0% paraformaldehyde (0.1M phosphate buffer, pH 7.4) under sodium pentobarbital. The objective area was punched out with a sharp-edged metal cylinder of 0.8 mm in diameter. These blocks of tissue were then washed in 0.1M phosphate buffer, postfixed in 2% osmium tetroxide, dehydrated in a graded series of ethyl alcohol, and embedded in Epon 812. Thin sections were cut with Super Nova ultramicrotome, pick up on grids and double stained with lead citrate and uranyl acetate, and observed in JEOL 100B electron microscope. The results were as follows: 1. In the control group, the neuronal cell body of the main sensory trigeminal nucleus was filled with nucleus, Golgi complex, Nissl substance, mitochondria, microfilaments and microtubules. However, few Nissl substances are seen in neuronal cell body. Axoaxonic synapse, axodendritic synapse, axosomatic synapse, axospinous synapse, myelinated and unmyelinated nerve fibers were well organized around cell bodies. Neurons with abnormal changes were not seen. 2. In the aging group, the neuronal cell body of the main sensory trigeminal nucleus contained large number of lipofuscin granules, dense body and swollen mitochondria. Terminal boutons contained glycogen, crystal-like vesicle and membranous indicating first signs of degeneration. The dendrites were found to be in synaptic contact with altered axon terminals. Frequently axons filled with dark axoplasn and splitted myelin sheath were noticed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.8
• /
• pp.693-699
• /
• 2003

To improve thermal stability of Teflon FEP which is the most widely used materials for electret application, Teflon AF film of 1 $\mu\textrm{m}$ thick was spin coated on FEP film and the charge storage properties were investigated. The surface potential depend on aging temperature. Thermal Stimulated Current(TSC), Atomic Force Microscopy(AFM), and Fourier Transform-Infrared Spectroscope(FT-lR) measurements were carried out. It is shown that the AF/FEP dual film have more higher electrical property and thermal stability than that FEP film have caused by charge stored at interface of AF and FEP.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.12
• /
• pp.2160-2168
• /
• 2015

The beneficial effects of probiotics are now widely reported, although there are only a few studies on their anti-aging effects. We have found that Lactobacillus plantarum HY7714 (HY7714) improves skin hydration and has anti-photoaging effects, and in the present study, we have further evaluated the anti-aging effect of HY7714 via a randomized, double blind, placebo-controlled clinical trial. The trial included 110 volunteers aged 41 and 59 years who have dry skin and wrinkles. Participants took 1 × 10¹⁰ CFU/day of HY7714 (probiotic group) or a placebo (placebo group) for 12 weeks. Skin hydration, wrinkles, skin gloss, and skin elasticity were measured every 4 weeks during the study period. There were significant increases in the skin water content in the face (p < 0.01) and hands (p < 0.05) at week 12 in the probiotic group. Transepidermal water loss decreased significantly in both groups at weeks 4, 8, and 12 (p < 0.001 compared with baseline), and was suppressed to a greater extent in the face and forearm in the probiotic group at week 12. Volunteers in the probiotic group had a significant reduction in wrinkle depth at week 12, and skin gloss was also significantly improved by week 12. Finally, skin elasticity in the probiotic group improved by 13.17% (p < 0.05 vs. controls) after 4 weeks and by 21.73% (p < 0.01 vs. controls) after 12 weeks. These findings are preliminary confirmation of the anti-aging benefit to the skin of L. plantarum HY7714 as a nutricosmetic agent.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.11 s.170
• /
• pp.2014-2021
• /
• 1999

The present investigation is concerned with the degradation characteristics of cast stainless steel(CF8M), exposed to the $\sigma$-phase degradation at $700^{\circ}C$. In the present paper, the degradation of CF8 M at $700^{\circ}C$ is evaluated by a non-destructive test, DL-EPR(double loop electrochemical potentiokinetic reactivation). The surface of specimens is observed by using scanning electron microscopy after DL-EPR test. Also. chromium contents of matrix, grain boundary and ferrite phase are analyzed by electron probe X-ray micro analyzer. Through the experiments, the following results are obtained 1) The degree of sensitization(DOS) of CF8M aged up to 15hr at $700^{\circ}C$ is increased with acing time while that is decreased with aging time from 15hr to 150hr. 2) The impact energy decreases with increase of $\sigma$-phase while DOS increases with $\sigma$-phase until aging time reaches to 15hr. After the aging time. 15hr, the $\sigma$-phase and the rate of impact energy with respect to aging time decreases. Therefore the degradation behavior of the CF8M can be evaluated by comparing SEM micrographs and the value of DOS.

• Journal of Korea Foundry Society
• /
• v.22 no.2
• /
• pp.89-96
• /
• 2002

This study examined the effects of adding Zn to Sn-3.5Ag solder on the microstructure changes and behavior of interface reaction of the solder joint with Cu substrate. The solder/Cu joints were examined with microscope to observe the characteristics of microstructure changes and interfacial reaction layer with aging treatment for up to 120 days at $150^{\circ}C$. Results of the microstructure changes showed that the microstructures were coarsened with aging treatment, while adding 1%Zn suppresses coarsening microstructures. The Sn-3.5Ag/Cu had a fast growth rate of the reaction layer in comparison with the Sn-3.5Ag-1Zn at the aging temperature of $150^{\circ}C$. Through the SEM/EDS analysis of solder joint, it was proved that intermetallic layer was $Cu_6Sn_5$ phase and aged specimens showed that intermetallic layer grew in proportion to $t^{1/2}$, and the precipitate of $Ag_3Sn$ occur to both inner layer and interface of layer and solder. In case of Zn-containing composite solder, $Cu_6Sn_5$ phase formed at the side of substrate and Cu-Zn-Sn phase formed at the other side in double layer. It seems that Cu-Zn-Sn phase formed at solder side did a roll of banrier to suppress the growth of the $Cu_6Sn_5$ layer during the aging treatment.

• Structural Engineering and Mechanics
• /
• v.42 no.4
• /
• pp.507-530
• /
• 2012

Age-related problems especially corrosion and fatigue are normally suffered by weatherworn ships and aging offshore structures. The effect of corrosion is one of the important factors in the Common Structural Rule (CSR) guideline of the ship design based on a 20 or 25 years design life. The aim of this research is the clarification of the corrosion effect on ultimate strength of stiffened panels on various types of double hull oil tankers. In the case of ships, corrosion is a phenomenon caused by the ambient environment and it has different characteristics depending on the parts involved. Extensive research considering these characteristic have already done by previous researchers. Based on this data, the ultimate strength behavior of stiffened panels for four double hull oil tankers such as VLCC, Suezmax, Aframax, and Panamax classes are compared and analyzed. By considering hogging and sagging bending moments, the stiffened panels of the deck, inner bottom and outer bottom located far away from neutral axis of ship are assessed. The results of this paper will be useful in evaluating the ultimate strength of an oil tanker subjected to corrosion. These results will be an informative example to check the effect of ultimate strength of a stiffened panel according to corrosion addition from CSR for a given type of ship.