• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.450-451
• /
• 2007

Dot-patterned carbon nanotube (CNT) emitters with excellent field emission properties were fabricated using photosensitive CNT paste. We carried out a parametric study on the compositions and the fabrication processes of the paste, in particular, by ball milling CNTs, which were optimized in terms of dot shapes and their field emission characteristics. The ball milling process improved the field emission current of the dot-patterned CNT emitters several times higher than that of the non-milled paste.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.444-444
• /
• 2011

Recently, patterned magnetic films and elements attract a wide interest due to their technological potentials in ultrahigh-density magnetic recording and spintronic devices. Among those patterned magnetic structures, magnetic anti-dot patterning induces a strong shape anisotropy in the film, which can control the magnetic properties such as coercivity, permeability, magnetization reversal process, and magneto-resistance. While majority of the previous works have been concentrated on anti-dot arrays with a single magnetic layer, there has been little work on multilayered anti-dot arrays. In this work, we report on study of the magnetic properties of bilayered anti-dot system consisting of upper perforated Co layer of 40 nm and lower continuous Ni layer of 5 nm thick, fabricated by photolithography and wet-etching processes. The magnetic hysteresis (M-H) loops were measured with a superconducting-quantum-interference-device (SQUID) magnetometer (Quantum Design: MPMS). For comparison, investigations on continuous Co thin film and single-layer Co anti-dot arrays were also performed. The magnetic-domain configuration has been measured by using a magnetic force microscope (PSIA: XE-100) equipped with magnetic tips (Nanosensors). An external electromagnet was employed while obtaining the MFM images. The MFM images revealed well-defined periodic domain networks which arise owing to the anisotropies such as magnetic uniaxial anisotropy, configurational anisotropy, etc. The inclusion of holes in a uniform magnetic film and the insertion of a uniform thin Ni layer, drastically affected the coercivity as compared with single Co anti-dot array, without severely affecting the saturation magnetization ($M_s$). The observed changes in the magnetic properties are closely related to the patterning that hinders the domain-wall motion as well as to the magneto-anisotropic bilayer structure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.155-156
• /
• 2007

Fabrication of dot-patterned carbon nanotube (CNT) emitters with excellent field emission properties using photo-sensitive CNT paste is described. The photosensitive CNT paste showed good photo-patternability, which led us to easily form $10-{\mu}m$-diameter dot arrays. We presented a parametric study on formulating the photo-sensitive paste and their resultant field emission characteristics.

• Korea-Australia Rheology Journal
• /
• 제19권3호
• /
• pp.165-169
• /
• 2007

The light guide plate (LGP) of LCD-BLU (Liquid Crystal Display-Back Light Unit) is usually manufactured by forming numerous dots by etching process. However, the surface of those etched dots of LGP is very rough due to the characteristics of etching process, so that its light loss is relatively high due to the dispersion of light. Accordingly, there is a limit in raising the luminance of LCD-BLU. In order to overcome the limit of current etched-dot patterned LGP, micro-lens pattern was tested to investigate the possibility of replacing etched pattern in the present study. The micro-lens pattern fabricated by the modified LiGA with thermal reflow process was applied to the optical design of LGP. The attention was paid to the effects of different optical pattern type (i.e. etched dot, micro-lens). Finally, the micro-lens patterned LGP showed better optical qualities than the one made by the etched-dot patterned LGP in luminance.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.786-789
• /
• 2007

Fabrication of dot-patterned carbon nanotube (CNT) emitters with excellent field emission properties using photo-sensitive CNT paste is described. The photosensitive CNT paste showed good photopatternability, which led us to easily form $10-{\mu}m-diameter$ dot arrays. We presented a parametric study on formulating the photo-sensitive paste and their resultant field emission characteristics.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.293-293
• /
• 2005

• 한국자기학회지
• /
• 제18권2호
• /
• pp.49-53
• /
• 2008

50 nm pitch의 magnetic dot pattern을 갖는 hard disk drive용 patterned media를 nanoimprint lithography(NIL) patterning과 electroplating 공정을 이용하여 제작하고 자기 및 결정구조 특성을 관찰하였다. Patterned media는 Si(100) wafer 위에 Ru(20nm)/Ta(5 nm)/$SiO_2$(100 nm)를 순차적으로 증착한 후 nanoimprint lithography를 이용하여 25 nm half pitch의 hole pattern을 형성하고 그 후 패터닝된 기판을 plasma ashing 공정을 이용하여 기판의 Ru층을 노출시킨뒤 electroplating을 이용하여 Co-Pt 합금막을 증착하여 제작하였다. Magnetic force microscopy(MFM) 분석을 이용하여 제작된 각각의 magnetic dot pattern이 single domain 특성과 수직자기이방성을 가지고 있음을 확인하였고, superconducting quantum interference device(SQUID) 분석을 통하여 2900 Oe이상의 높은 수직방향 보자력을 확인하였다.

• 열처리공학회지
• /
• 제33권1호
• /
• pp.25-32
• /
• 2020

In this study, the tribology of laser patterned DLC thin film was studied. DLC thin films were coated by RF-PECVD to improve the durability of tungsten carbide (WC) materials. DLC thin films have high hardness and low friction characteristics. Dot and line patterning was processed on the surface of DLC thin film with femtosecond laser, and the coefficient of friction was improved. As a result of ball on disk abrasion test, the hardness and friction coefficient of DLC thin films were much better than that of WC material. The friction coefficient of DLC thin film with dot patterning and line patterning showed better results. The excellent performance of the laser patterned DLC coating is appeared to reduce the coefficient of friction due to the reduction of surface contact area.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.90.1-90.1
• /
• 2008

• 복식
• /
• 제54권7호
• /
• pp.55-62
• /
• 2004

Research into the ancient dyeing and weaving culture is of critical importance to the fact that they constitute an integral part of the Korean costume. Due to the absence of the originals reflecting ancient costume cultures, it is difficult to figure out what the dyeing and weaving culture was like in ancient times. Because of limited visual materials available from the wall paintings of ancient tombs, studies conducted so far concerning the costume culture for the Goguryeo have focused on visual elements such as shape, structure, and type. As a result, research into ancient Korean dyeing and weaving cultures hasn't been properly made. Thanks to the presence of both some dyeing fabric originals from Goguryeo's neighboring countries and some visual materials like the wall paintings of the Goguryeo, it may be possible to obtain some clues to the dyeing and weaving culture. The dotted Pattern costumes were selected such as Muyongchong, No. 1 Jangcheon Tomb, Gakjeochong, Samsilchong, Ssangyeongchong, Susanri Tomb. According to a book titled ‘Hanwon’, the Goguryeo people manufactured fabrics in such a way that resist-dyed spots produced elaborate patterns over the purple fabric. It can be safely said that such dot patterns were produced by means of dyeing rather than weaving, because identical patterns aren’t well produced by means of painting and embroidery. Considering Goguryeo’s natural features, the dot patterns mentioned in historical literatures are thought to have been produced using animal’s skin. However, there is highest possibility that the dot Patterns were Produced using tie-resist dyeing or wax-resist dyeing techniques. With respect to the dyeing and weaving culture for the Goguryeo, one must refer to neighboring countries’ dyeing and weaving environments, given that the Goguryeo had engaged substantial cultural exchanges with China.