• Title/Summary/Keyword: dot

Search Result 1,585, Processing Time 0.026 seconds

Strength Safety Evaluation of Composite Pressure Container for Hydrogen Fuel Tanks (수소연료탱크용 복합소재 압력용기에 관한 강도안전성 평가연구)

  • Kim, Chung-Kyun;Kim, Do-Hyun
    • Journal of the Korean Institute of Gas
    • /
    • v.15 no.1
    • /
    • pp.30-34
    • /
    • 2011
  • This paper presents a strength safety evaluation of composite pressure container for hydrogen fuel tanks with a storage capacity of 104 liter and 70MPa pressure. The carbon fiber composite container is manufactured by an aluminum liner of Al6061-T6 and composite multi-layers of hoop winding layer in circumferential direction, $12^{\circ}C$ inclined winding layer and $70^{\circ}C$winding layer in helical direction respectively. The FEM results on the strength safety of composite fuel tanks were evaluated with a criterion of design safety of US DOT-CFFC and KS B ISO 11119-2 codes. The FEM computed results indicate that the proposed design model of 104 liter composite container is safe based on two strength safety codes. But, the computed results of carbon fiber fuel tanks based on US DOT-CFFC code is safer compared with that of KS B ISO 11119-2. Thus the hydrogen gas pressure container of 70MPa may be evaluated and designed by US DOT-CFFC code for more strength safety.

A New Set of Capillary Tube Selection Charts for R-22 in Consideration of the Roughness Effect (조도를 고려한 R-22용 모세관 선정 선도)

  • Kim, C.N.;Hwang, U.P.;Park, Y.M.
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.7 no.4
    • /
    • pp.681-693
    • /
    • 1995
  • A new set of capillary tube selection charts for R-22 is proposed. The set of charts takes into account of the roughness effect on the mass flow rate. For this purpose, a set of numerical model is developed and a series of experiments is conducted to verify the numerical model. A numerical model is used to calculated the mass flow rate for several sets of tube diameter, length, inlet pressures and degree of subcooling. The outlet of the tube is controlled to be at critical condition. The experimental flow rate is compared with calculated values. The calculated values are consistently less than the experimental ones except for the flow rate range below 40kg/hr. The deviation is within 10---. Based on the nunmerical model and results of experiments, the set of capillary tube selection charts for R-22 is constructed. The set of charts consists of standard capillary tube chart(L=2030mm, d=1.63mm, ${\varepsilon}=2.5{\mu}m$), non -standard flow factor(${\phi}_1$) chart, and non-standard roughness factor(${\phi}_2$) chart. The mass flow rate, flow factor, and the roughness factor are defined respectively as; $\dot{m}={\phi}_1{\phi}_2\dot{m}_{standard}\\{\phi}_1=\frac{\dot{m}(L,\;d,\;\varepsilon_{standard})}{\dot{m}_{standard}(L_{standard},\;d_{standard},\;{\varepsilon}_{standard})}\\{\phi}_2=\frac{\dot{m}(L_{standard},\;d_{standard},\;{\varepsilon})}{\dot{m}_{standard}(L_{standard},\;d_{standard},\;{\varepsilon}_{standard})}$.

  • PDF

Model-based Dithering Using Dot Pattern Selection (도트 패턴 선택을 이용한 모델 기반 디더링)

  • Lee, Chae-Soo;Park, Yang-Woo;Uam, Tae-Uk;Jang, Joo-Seok;Ha, Yeong-Ho
    • Journal of the Institute of Electronics Engineers of Korea SP
    • /
    • v.38 no.3
    • /
    • pp.247-257
    • /
    • 2001
  • New methods are proposed for printing a full resolution image on a limited output device. The proposed algorithm uses a dot-pattern database that models overlapping phenomena among neighbor printing dots. To solve the problem of dot-overlap, the gray levels of dot-pattern sets were calculated using a circular dot-overlap model and then measured by a spectrometer. Thereafter, in order to improve the visual quality of the color dithering, the contrast sensitivity function of the human visual system was used. As a result, the optimal dot-pattern can be selected from the database. Consequently, the proposed algorithm can produce high quality images while using low-cost color devices.

  • PDF

The Status of Research of Quantum dot Using 4P Analysis -Focusing on the application and convergence field of quantum technology (4P 분석을 통한 양자점 기술개발 현황 분석 -양자점 기술의 응용 및 융합 분야를 중심으로)

  • Heo, Na-Young;Ko, Young-Joo
    • Journal of the Korea Convergence Society
    • /
    • v.6 no.2
    • /
    • pp.49-55
    • /
    • 2015
  • Quantum dot technology can be complementary application of the bulk material, and that a wide range of applications that can take advantage of the characteristic convergence technology. With the development of quantum dot technology, it is important to analyze Marketability of quantum technology, business opportunity. In this study, patents, papers, market, analysis of the project will be to investigate the quantum information research trends. Research results are expected to be used as a basis for research and development path setting and strategic planning of the quantum dot. In particular, this study found the performance of quantum dot research through patents and papers analyzed. In addition, fast-growing field, the field to lead the commercialization were derived. Compared to the advanced research and national research was to diagnose the domestic research into quantum dots.

The Study of the Accuracy of Acereage (측정법(測定法)에 따른 면적측정(面積測定)의 정도(精度))

  • Kim, Kap D.
    • Journal of Korean Society of Forest Science
    • /
    • v.6 no.1
    • /
    • pp.24-26
    • /
    • 1967
  • 1. The purpose of this experiment was to compose the precision of dot grid method and transects method with that of pianimeter method in area measurement. 2. The following conclusions were obtained through study on precision of area measurement of 20 plots. 3. The percentage error of each method was none significant in comparision with planimeter method. 4. The dot grid method gave 0.2% of overestimated value and the transects method 0.67% of underestimated value. 5. Accordingly, the dot grid method gave the better result than the transects method. 6. The transects method had small errors at the plots larger than 30ha. while it had big errors at plots smaller than 30ha. Therefore, it can be said that the transects method is suitable for area measurement of plots larger than 30 hectares.

  • PDF

A Study on the Tradition and Identity of Bodily Expression System in India (인도 신체표현(āṅgika abhinaya)체계의 전통성과 정체성에 관한 고찰 - 『나띠야 샤스뜨라』의 규정을 중심으로 -)

  • Huh, Dongsung
    • (The) Research of the performance art and culture
    • /
    • no.18
    • /
    • pp.223-255
    • /
    • 2009
  • This paper deals with the tradition and identity of physical expression(${\bar{a}}{\dot{n}}gika$ abhinaya) system in Indian traditional theatre and dance. The ${\bar{a}}{\dot{n}}gika$ abhinaya of Indian dance and theatre has been stylized through long terms and thereby defines their identity and peculiarity by its highly stylized expression techniques while following dramatic way($n{\bar{a}}tya$-dharmi). The ${\bar{a}}{\dot{n}}gika$ abhinaya is said to had been derived from the ritualistic practice of ancient Vedic period(B.C. 15th-B.C. 5th c.), which is most clearly exemplified in hand gesture(hasta mudra). In $N{\bar{a}}tya$ ${\acute{S}}astra$, ${\bar{a}}{\dot{n}}gika$ abhinaya is explained in detail. It is classified broadly into facial expression(mukhaja abhinaya), gesture expression(śārīra abhinaya), movement expression($cest{\bar{a}}krita$ abhinaya). Further, $N{\bar{a}}tya$ ${\acute{S}}astra$ divides their various usages by parts which include head, glance, eyes, nose, eyelid, cheek, lower lip, chin, mouth, hand, chest, waist, belly, hip. thigh, claf, foot. Besides, it explains diverse ways of foot movement($c{\bar{a}}ri$), standing poses(sthana), gait(gati) and their combined movements(mandala). Many forms of Indian traditional theatre and dance basically follows the rule of ${\bar{a}}{\dot{n}}gika$ abhinaya proposed in $N{\bar{a}}tya$ ${\acute{S}}astra$, which identifies their unique characteristics.

Implementation of blow situation with very shift-ductile-dot on the honk changing-status of constituted function

  • Kim, Jeong-lae;Hwang, Kyu-sung;Choi, Sung-Jai;Im, Yong-Soon
    • International Journal of Advanced Culture Technology
    • /
    • v.10 no.2
    • /
    • pp.187-193
    • /
    • 2022
  • We is configured the honk changing-status technique that is to meld the square-built blow-shock status of the gleam-differential perception level (BIAL) on the honk perception lineament. The perception level condition by the honk perception lineament system is constituted with the blow-shock system. As to experimentation a ductile-dot of the gleam ductile-dot, we are found of the honk value with ductile-dot by the blow upper shift. The concept of perception level is constituted the reference of gleam-differential level for changing-status signal by the honk shock lineament. Further symbolizing a square-built changing-status of the BIAL, of the average in terms of the blow-shock lineament, and the honk ductile-dot shock that was the honk value of the far changing-status of the Ho-PL-FA-θAVG with 15.41±8.63 units, that was the honk value of the convenient changing-status of the Ho-PL-CO-θAVG with 8.70±3.06 units, that was the honk value of the flank changing-status of the Ho-PL-HO-θAVG with 2.65±1.19 units, that was the honk value of the edge changing-status of the Ho-PL-VI-θAVG with 0.51±0.18 units. The blow shock will be to investigate at the square-built ability of the blow-shock lineament with ductile-dot by the honk perception level on the BIAL, that is denote the gleam-differential lineament by the perception level system. We will be possible to curb of a lineament by the differential signal and to employ the honk data of blow shock level by the blow perception system.

A Study on the Quality Improvement of Red Dot Sight for Grenade Launcher by Parallax Reduction (고속유탄기관총용 조준경의 시차 개선을 통한 조준경 품질 향상에 관한 연구)

  • Kim, Ji-Hoon;Jeung, Bo-Sun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.20 no.11
    • /
    • pp.130-135
    • /
    • 2019
  • This study performed the quality improvement of a red dot sight for a 40 mm grenade launcher through parallax reduction. The red dot sight cited in this study is currently in mass production for military use as a non-weapon system. While the red dot sight's parallax currently meets requirements, slightly greater error was observed on the outside of effective optical area of the reflection lens compared to other sights. Parallax is easily affected by eye movement, which can result in aiming error. To improve the red dot sight's quality, this study analyzed why parallax is observed in the effective optical area of the reflection lens and how to reduce it. As a result, the red dot sight demonstrated lower parallax error using the new optical system design with an increased reflection lens thickness and modified components configuration related to the reflection lens assembly. Parallax was calculated and simulated by using a particular program to verify that it decreased. This improvement for the 40 mm. grenade launcher red dot sight more than satisfies requirements, offers advanced capabilities for users, and as a result, successful operation carryout.

HOMOCLINIC ORBITS FOR HAMILTONIAN SYSTEMS

  • Kim, June-Gi
    • Bulletin of the Korean Mathematical Society
    • /
    • v.32 no.1
    • /
    • pp.1-11
    • /
    • 1995
  • Let $p, q \in R^2 and H : R^{2n} \to R^n$ be differentiable. An autonomous Hamiltonian system has the form $$ (0.1) \dot{p} = -\frac{\partial q}{\partial H}(p, q), \dot{q} = \frac{\partial p}{\partial H}(p, q) $$.

  • PDF

TB 클리닉 - 결핵환자 복약확인(DOT)시범사업

  • O, Su-Yeon
    • 보건세계
    • /
    • v.59 no.3
    • /
    • pp.8-12
    • /
    • 2012
  • - DOT하 결핵환자 치료 성공율을 90% 이상 달성 ${\rightarrow}$ 치료 완료후 2년이내 균양성 재발율을 3% 미만으로 달성 - 질병관리본부와 결핵연구원, 보건소 및 민간 병의원에서 치료받고 있는 결핵환자에 대한 WHO의 결핵조기퇴치 기본 전략인 직접복약확인체계(DOTS, Directly observed treatment short course)시범사업 본격 실시

  • PDF