본 연구에서는 광대역 펄스감마선 탐지센서 최적화 설계를 수행하고 설계결과를 기반으로 탐지센서를 제작하여 전기적 특성을 분석하였다. 탐지센서의 최적화 설계를 위해 펄스감마선의 시간에 따른 에너지 프로파일로 부터 입력 변수를 도출하고 탐지감도 제어회로를 통하여 출력전류 범위를 결정하였다. 도출된 변수를 바탕으로 N-type Epi Wafer 및 TCAD(Technology Computer Aided Design)로 설계하고 제작하였다. 제작된 탐지센서의 전기적 특성 분석 결과 -3.3V 전압에서 12pA의 누설전류와 -5V의 전압에서 완전 공핍화 되는 특성을 가짐을 확인하였다. 제작된 센서의 포항가속기연구소 TEST LINAC 시험결과 감마선 설정 선율의 펄스방사선에 대해 고감도의 광전류를 생성시킴을 확인하였다.
This paper is researched that electric characteristic of Digital x-ray radiography technique with changing composition ratio of Iodine. Dopant material, Iodine is evaporated with amorphous selenium. Thorugh the old papers say, doponted Iodine will be down the created trap level because of Arsenic dopant material in amorphous selenium. Arsenic material of Composition ratio in amorphous selenium is fixed with 0.3% and test sample is deposited composition of 30, 100, 300, 500, 700ppm with thermal evaporate system. Experimental measurement is performed by dark current and x-ray sensitivity in amorphous selenium based radition detector sensor. Fabricated test sample thickness is $30{\mu}m$ and injected voltage is $3{\mu}m$,$6{\mu}m$,$9{\mu}m$ to both electrode. Experimental results showed that the net charge of composition rate of 30ppm is 398.88 pc/mR/$cm^2$ very high. And increase of the Iodine composition ratio is tendency to the decrease of net charge. Doping changing composition of Iodine in amorphous selenium detector offered to basical information of amorphous selenium material.
Ju Jeh Beck;Kang Tae Young;Cho Sung Jin;Sohn Tae Won
전기화학회지
/
제7권3호
/
pp.131-137
/
2004
Sol-gel method which provides better electrochemical and physiochemical properties compared to the solid-state method was used to synthesize the material of $LiFe_yMn_{2-y}O_4$. Fe was substituted to increase the structural stability so that the effects of the substitution amount and sintering temperature were analyzed. XRD was used for the structural analysis of produced material, which in turn, showed the same cubic spinel structure as $LiMn_2O_4$ despite the substitution of $Fe^{3+}$. During the synthesis of $LiFe_yMn_{2-y}O_4$, as the sintering temperature and the doping amount of Fe(y=0.05, 0.1, 0.2)were increased, grain growth proceeded which in turn, showed a high crystalline and a large grain size, certain morphology with narrow specific surface area and large pore volume distribution was observed. In order to examine the ability for the practical use of the battery, charge-discharge tests were undertaken. When the substitution amount of $Fe^{3+}\;into\;LiMn_2O_4$ increased, the initial discharge capacity showed a tendency to decrease within the region of $3.0\~4.2V$ but when charge-discharge processes were repeated, other capacity maintenance properties turned out to be outstanding. In addition, when the sintering temperature was $800\~850^{\circ}C$, the initial capacity was small but showed very stable cycle performance. According to EVS(electrochemical voltage spectroscopy) test, $LiFe_yMn_{2-y}O_4(y=0,\;0.05,\;0.1,\;0.2)$ showed two plateau region and the typical peaks of manganese spinel structure when the substitution amount of $Fe^{3+}$ increased, the peak value at about 4.15V during the charge-discharge process showed a tendency to decrease. From the previous results, the local distortion due to the biphase within the region near 4.15V during the lithium extraction gave a phase transition to a more suitable single phase. When the transition was derived, the discharge capacity decreased. However the cycle performance showed an outstanding result.
Al이 0.01에서 0.05 몰 도핑된 오산화바나듐을 졸-겔법을 이용하여 제조하였고, Al이 도핑된 오산화바나듐의 화학적성질과 전기화학적 특성을 조사하기 위하여 $Li/Al_xV_2O_5$ 전지를 만들었다. $Al_xV_2O_5$ xerogel의 표면형상은 비등방성의 주름진 판상을 이루며 층간거리는 약 $11.5{\AA}$이었다. IR 스펙트럼에 의하면 도핑된 Al이 $V_2O_5$의 vanadyl기에 결합하고 있는 것으로 나타났다. $Al_xV_2O_5$ xerogel은 가역성과 에너지밀도가 $V_2O_5$보다 향상되었다. 또한 10 mA/g의 방전율로 얻은 $Al_{0.05}V_2O_5$ xerogel의 비용량은 200 mAh/g 이상이었으며, 1.9 V에서 3.9 V 전위영역에서 31회의 연속 충방전 실험을 한 결과 약 90%의 사이클효율을 나타내었다.
교류구동형 플라즈마 표시소자의 보호막으로 사용되는 MgO의 특성향상을 위하여 기존의 MgO에 양이온이 등전적으로 치환될 수 있는 ZnO를 소량 첨가하여 고주파 마그네트론 스퍼터링 방법으로 $Mg_{1-x}$Z $n_{x}$O박막을 성장시키고 박막의 전기적, 광학적 특성을 조사하였다. ZnO농도가 0.5 at%, 1at%인 $Mg_{1-x}$Z $n_{x}$O 박막을 보호막으로 갖는 PDP 테스트 판넬을 제작하고 ZnO의 첨가가 소자의 방전전압과 메모리 이득에 미치는 영향을 살펴보았다. ZnO농도가 0at%, 0.5 at%, 1at%인 $Mg_{1-x}$Z $n_{x}$O 박막의 광투과율은 ZnO 첨가에 따라 변화를 보이지 않으나 유전상수는 다소 증가하는 경향을 보였다. ZnO의 농도가 0.5 at%인 $Mg_{1-x}$Z $n_{x}$O 박막을 보호막으로 갖는 PDP 소자의 방전개시전압과 방전유지 전압이 MgO 박막을 보호막으로 갖는 소자에 비해 20V까지 낮아졌고, 결과적으로 메모리계수는 다소 증가하였다. ZnO농도가 0.5 at%, 1at%인 $Mg_{1-x}$Z $n_{x}$O 박막을 보호막으로 갖는 소자에서 ZHO의 첨가에 비례하여 방전세기 (플라즈마 밀도)가 증가하였다.도)가 증가하였다.도)가 증가하였다.
투명전극은 디스플레이, 터치스크린, 태양전지 등 폭넓은 분야에서 응용되고 있어 현재 각광 받는 연구 주제 중 하나이다. 특히, ITO(인듐산화물)을 이용한 투명전극은 뛰어난 효율성 때문에 가장 주목 받고 있는 전극 형태 중 하나이다. 그러나 ITO투명전극은 인듐 소재의 희소성으로 인한 자원고갈문제 및 복원력, 투명도 등에서 취약점을 지니고 있는 것으로 보고되어 있다. 이러한 ITO 투명전극의 취약점을 보완하고, 동시에 플렉서블 디스플레이(Flexible Display) 소자에 적용 가능한 대체 투명전극에 관한 연구는 현재 가장 주목할 만한 가치가 있는 연구분야로 부각되고 있다. 본 연구에서는 대체 투명전극 중 하나로 그래핀 투명전극(Graphene Transparent Electrode)을 주목했다. PEN(Polyethylene Naphthalate) 투명기판 상에 Wet-Transfer형식으로 그래핀을 전사하여 그래핀 투명전극을 구현했으며, 복원력 확인을 위해 그래핀에 2가지 (Compressive/Tensile) 압력을 가하며 구부러짐 실험(Bending Test)을 진행하며 그래핀 투명전극의 저항값을 측정했다. 일반 금속전극의 경우, 일정한 수준 이상의 압력 또는 구부러짐이 반복되는 실험의 횟수가 증가되면 원래의 복원력을 상실하며, 저항값이 상승하는 것으로 보고된바 있다. 그러나 이번 연구에서는 그래핀 투명전극을 사용해 PEN 기판 위에 투명전극을 제작한 경우, 일정한 수준의 구부러짐 반복횟수(~1,000회) 및 구부러짐 정도(~10%) 하에서 저항값이 일정하게 유지됨을 확인할 수 있었다. 별도로, 기존에 알려져 있던 순수 그래핀(Pristine Graphene)의 취약점 중 하나인 높은 저항값을 우려하여 본 연구에서는 그래핀에 도핑을 하고, 그 영향을 분석해 보았다. 그 동안 그래핀 도핑법에 대한 적지않은 연구들이 진행되었으며, 본 연구에서는 TFSA(Bis(trifluoromethanesulfonyl)amide)라는 물질을 이용한 그래핀 도핑법을 채택했다. 실험 결과, 도핑된 그래핀 투명전극은 위와 같은 수준의 그래핀 본연의 복원력을 유지하면서 저항값은 순수 그래핀 대비 약 70% 정도 낮아짐을 확인할 수 있었다. 본 연구를 통해 그래핀 투명전극이 그래핀 고유의 특성인 높은 투명도와 복원력, 도핑으로 인한 저항값 감소가능성을 확인함으로써, 그래핀 투명전극이 ITO 투명전극의 좋은 대체자가 될 수 있는 가능성을 확인할 수 있었다.
본 연구는 $Ba(OH)_2{\cdot}8H_2O$를 기본물질로 하는 안정된 자동차용 축열에너지시스템의 축열매체를 찾고 이의 적용가능성 여부를 조사하고자 하였다. 실험은 순수한 $Ba(OH)_2{\cdot}8H_2O$와 여기에 첨가제를 넣은 혼합물을 대상으로 장기간 사용가능성과 이들 물질이 cycle 반복후 상태의 변화와 열적특성에 대해 조사되었다. 연구의 결과는 $Ba(OH)_2{\cdot}8H_2O$에 $Sr(OH)_2{\cdot}8H_2O$를 첨가한 혼합물이 1300회 cycle 반복후에도 물질의 변화가 없었으며 방열량 감소율도 2%로서 자동차용 축열시스템의 축열매체로서의 가능성이 높게 나타났다.
[ $LiCoO_{2}$ ] is the most common cathode electrode materials in Lithium-ion batteries. $LiCo_{0.97}Mg_{0.03}O_2$ was synthesized by the solid-state reaction method. We investigated crystal structures, electrical conductivities and electrochemical properties. The crystal structure of $LiCo_{0.97}Mg_{0.03}O_2$ was analyzed by X-ray powder diffraction and Rietveld refinement. The material showed a single phase of a layered structure with the space group R-3m. The lattice parameter(a, c) of $LiCo_{0.97}Mg_{0.03}O_2$ was larger than that of $LiCoO_2$. The electrical conductivity of sintered samples was measured by the Van der Pauw method. The electrical conductivities of $LiCoO_2$ and $LiCo_{0.97}Mg_{0.03}O_2$ were $2.11{\times}10^{-4}\;S/cm$ and $2.41{\times}10^{-1}\;S/cm$ at room temperature, respectively. On the basis of the Hall effect analysis, the increase in electrical conductivities of $LiCo_{0.97}Mg_{0.03}O_2$ is believed due to the increased carrier concentrations, while the carrier mobility was almost invariant. The electrochemical performance was investigated by coin cell test. $LiCo_{0.97}Mg_{0.03}O_2$ showed improved cycling performance as compared with $LiCoO_2$.
MEMS(Microelectromechanical System) 기술분야에서 폭넓게 사용하고 있는 폴리실리콘 박막을 이용하여 폴리실리콘 미소 공진 구조체를 제작하였다. 폴리실리콘 증착은 저압기상화학증착 장비를 사용하여 대칭적 두께로 박막을 적층하였고 폴리실리콘의 응력과 응력구배를 최소화시키기 위한 적층, 도핑 방법 및 열처리에 따른 특성을 분석하였다. 이를 위하여 브리지 빔과 캔티레바 테스트 패턴을 제작하여 기계적 응력 특성을 측정하였으며, 아울러 공정 조건별 개별 시료에 대한 물성을 XRD, SIMS등으로 분석하였다. 공진 구조체는 대칭적 증착 구조를 가지며, 최종적으로 $6.5{\mu}m$의 두께로 적층되었다. 제작된 평면형 공진 구조체의 진동특성은 직류 15V, 교류 0.05V의 구동전압, 1000mtorr 압력에서 공진 진폭이 $5{\mu}m$ Q값이 1270임을 보였으며, 개발된 마이크로 폴리실리콘 공진체는 마이크로 자이로 및 가속도 센서에 응용될 수 있다.
JSTS:Journal of Semiconductor Technology and Science
/
제10권4호
/
pp.265-275
/
2010
In this work, reliable methodology for device design is presented. Based on this method, the underlap length has been optimized for minimizing the gateinduced drain leakage (GIDL) in a 22-nm node 4-terminal (4-T) silicon-on-insulator (SOI) fin-shaped field effect transistor (FinFET) by TCAD simulation. In order to examine the effects of underlap length on GIDL more realistically, doping profile of the source and drain (S/D) junctions, carrier lifetimes, and the parameters for a band-to-band tunneling (BTBT) model have been experimentally extracted from the devices of 90-nm channel length as well as pnjunction test element groups (TEGs). It was confirmed that the underlap length should be near 15 nm to suppress GIDL effectively for reliable low standby power (LSTP) operation.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.