• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.6
• /
• pp.39-49
• /
• 2015

This study was to evaluate the growth and spatial distribution characteristics of Rhus javanica population. The study was conducted between 2015 January and July at the cut-slope revegetation site in Dae-Ji Mountain. Seeds of native species were sowed on the disturbed cut-slope in 2002. There were 119 vascular plant species 55 families and 94 genera on the cut-slope. Compositae, Rosaceae, and Leguminosae plants were dominant species, which are pioneer species in dry and barren site. Canopy of trees covered 44.1% total area, which was 8.3% increase from 2008. Rhus javanica, main species, dominated all DBH classes except DBH >24cm. Albizzia julibrissin showed high frequency in the 6~17cm DBH class and Salix koreensis was abundant at >12cm. Elaeagnus umbellata, Corylus heterophylla var. heterophylla, Alnus sibirica, and Acer pictum were not observed. Rhus javanica population was the most frequently observed on the south facing cut-slope. The average DBH of Rhus javanica was $7.3({\pm}3.7)cm$ and the average height of them was $5.2({\pm}1.7)m$. Annual average DBH growth was 7.9mm/yr and the maximum growth(12.0mm/yr) was the $3^{rd}$ year. It decreased after $6^{th}$ years. Although Rhus javanica population in the Dae-Ji Mountain was a seed originated plantation, the forest had reverse J shape diameter frequency distribution. It indicated that the forest is uneven-aged forest. The Rhus javanica population was expected to sustain.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.1
• /
• pp.11-17
• /
• 2002

This paper compares the difference between the village groves in the Jinan settlement region and the Hamyang settlment region in Honam and the Youngnam mountainous region. The results are as follows: Fifty-one village groves in the Jinan legion were found and 40 village groves were found in the Hamyang region. It was established that the village groves in the Jinan region of Honam province were conserved better than those of Hamyang region of Youngnam province. In the Jinan area, the village groves were principally found in the Jinan-eup and the Hamyang regions, primarily in Seosang-myun and Aneui-myun. So it was determined that the village groves were distributed inequitably in the two regions. In L / W ratio, the Jinan region is 3.6 and Hamyang region is 2.0 Jinan is 1.8 times greater than Hamyang. Therefore, it was concluded that Jinan is stronger than Hamyang in linear function of the village groves. Stone stooge for complementation function was found in 11 village groves in the Jinan region and 6 village groves in Hamyang. So the percentage of the remaining stone storage is 15-20 % of all village groves. Regarding grove makeup, the village gloves in Jinan region is deciduous forest principally. In contrast, the groves of Hamyang are principally coniferous forest. The dominant tree of the Jinan-gun region is Zelkova serrata, but in Hamyang it is Pinus densiflrora. By number, Hamyang region has two times the trees than Jinan region. In density of stand, the Hamyang region is 76.2% higher than Jinan region. In height and diameter of trees, the Jinan region is greater than the Hamyang region. It was identified that RSI of both region is 40%. So in density of trees, both region are sparse. This paper has a limit in ideiltiting the differences between Yolmg-nam ar\ulcorner Hnam village groves because comparative review only examined two regions.

• Journal of Korean Society for Atmospheric Environment
• /
• v.32 no.3
• /
• pp.256-271
• /
• 2016

The source and transport of the severe Asian dust event (ADE) recently observed in the Korean peninsula were analyzed based on observations (surface weather charts and satellite data) and modeling study (WRF-CMAQ modeling systems). The ADE occurred on 20-21 March 2010 in South Korea with very high $PM_{10}$ concentrations (up to approximately $3,000{\mu}g/m^3$ in Daegu and Jeju). The dominant meteorological conditions affecting the dust outbreak and transport processes were found to be associated with the two synoptic features: (1) strong airflows (i.e., westerlies) induced by a strong pressure gradient resulting from a dense isobar pattern (west-high and east-low) between Tuva Republic and Mongolia and (2) a rapid movement of the strong westerlies merged with airflows generated near Gobi Desert and Inner Mongolia. The merged strong westerlies with a low pressure played a pivotal role in the huge amount of AD and its transport height of 5-8 km. The time and location of dust emissions calculated in the source regions were similar to those observed in the weather charts and satellite image. The ADE simulation mostly showed agreement in the patterns and the concentration levels of modeled dust (including $PM_{10}$) with those of the observations.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.149-158
• /
• 2004

In most RP processes, the inherent stair-stepped surfaces and shrinkage-induced warping of the parts require post processing such as surface finishing. To minimize such defects, VLH-ST, a newly developed RP process, employs a 3.9-mm thick expandable polystyrene (EPS) foam sheet and a hot wire to contour it to have slant linear-interpolated sides. The use of relatively thick sheets for layers, however, limits the process capability of constructing fine details, especially smaller than the layer thickness. This study is focused on the development of a post processing method fo fine details of VLM-ST parts. The post-processing tool was designed to meet all the requirements for the desirable post processing. It adopted a hot wire as a means of melting the EPS foam sheet. Various basic experiments on the post processing were carried out to obtain the optimal process conditions. The dominant process parameters such as the radiated heat input, the tool speed, and the gap between the tool tip and the foam sheet (tool height) were considered in the experiments. The effectiveness of the developed post-processing method fo forming or engraving fine details on the VLM-ST parts has been thus demonstrated. The experiments on engraving several sets of letters, such as CANESM, 인간, and 한국과학기술원, on the EPS foam sheet were carried out. In addition, a flowery shape was engraved on a three-dimensionally curved surface of a pottery-shape VLM-ST part.

• Journal of the Korean Society of Physical Medicine
• /
• v.11 no.3
• /
• pp.55-58
• /
• 2016

PURPOSE: This study was measured the differences in the flexor and extensor muscle activities of the elbow joints based on the tire pressure of wheelchairs during propulsion, investigating the optimal tire pressure for improving occupants' propulsion and avoiding related injury. METHODS: Ten healthy volunteers (10 men aged $23.1{\pm}1.9years$, weight: $67.9{\pm}3.4kg$, height: $175.1{\pm}2.7cm$) took part in the study. The mean values used in the statistical process were obtained from values measured while a subject sitting on a wheelchair propelled himself forward for 10 meters on a flat floor at maximum speed. The tire pressure of the wheelchairs was set at 100 psi, 50 psi, and 25 psi. All of the subjects performed wheelchair propulsion for each pressure. This study was measured the activation of the biceps brachii and triceps brachii muscles on the dominant side during wheelchair propulsion. The measured data was analyzed using one-way analysis of variance (ANOVA) via the statistical package for the social sciences (SPSS) version 12.0 for Windows to compare the muscle activity. RESULTS: The muscle activities of the biceps brachii and triceps brachii were significant differences between each pressure group. The post hoc test found statistically significant differences between 100 psi and 50 psi and 100 psi and 25 psi for the biceps brachii and triceps brachii muscles, respectively. CONCLUSION: The maintaining proper tire pressure in a wheelchair may help to prevent overuse syndrome in the occupant's elbow joints.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.1
• /
• pp.67-73
• /
• 2010

The purpose of this study was to compare the differences in kinematic and kinetic parameters of the ankle and knee joint according to three landing direction(central, left, right). Fifteen collegiate male athletes(age: $22.7{\pm}3.5$ years, height: $174.9{\pm}7.1\;cm$, weight: $69.4{\pm}6.7\;kg$) with the right leg as dominant were chosen. The subjects performed series of drop landings in three directions. In terms of the three different landing directions, plantar flexion was the greatest during the central drop landings. For each initial contact of the landing direction, plantar flexion of the ankle was greatest at the central drop landing, inversion of the ankle was greatest at the right landing and valgus of the knee was greatest at the left drop landing. Regarding the peak force, the greatest was at the 1st peak force during the central drop landing. For the time-span of the 2nd peak force and the 2-1 peak force, both right sides resulted as the greatest. Therefore, with the appropriate training in landing techniques and developing neuromuscular training for proprioception by taking the injury mechanisms on ankle and knee during drop landings into account, it will assist in preventing such injuries.

• The Korean Journal of Ecology
• /
• v.15 no.2
• /
• pp.103-115
• /
• 1992

This dissertation, which has been prepared in the region of cheju(33o31'N, 126o32'E) from may,1987 to appril, 1989, is to elucidate the dominant characteristics of early stages in secondary succession, by examining the life history of erigeron annuus for the seeding depth of a seed was dependent upon the degree of shading. That is, on the area of ocm,the more tense the shading was, the more germination percentage was increased, while, in the case of 1.5cm, it was somewhat increased, when shading bwcame ess and less tense. The rosette of e. annuus, through its relative light intensity was decreased by shading, up to 5% of natural light, showed some strong shade tolerance, which had no difficulty in matter production. The species diversity of mixed-species community was the highest in the middle of April, the lowest in the last of may. The dominance index was the highest in the late may, the lowest in the middle of April. Toward the end of may, the occupation rate of dominance species was the highest. There was a neutral relationship between intraspecific and interspecific, owing to the differentiation of its niche, temporally and spatially. Productive structure of the community revealed a narrow leaf type which was concentratively distributed in the mid part of community height. The relative light intensity of community ground surface was 6.1%, the leaf inclination 60o,the extinction coefficient(k) 0.4, biomass of community 1,045.6 g.d.w./m2,T/Rratio 9.3, C/Frate 7.0 and sumgermanition, shade toarance and community characteristics on erigeron annuus l.in chejumed leaf area index 3.88. through the various life cycles o e.annuus, we can say that it decreases mortality of seeding caused by some stress and disturbance, for germination lasts for a long time at any opportunity available, and it promotes population growth. The strong shade tolerance of a rosette and the variableness of a life from differentiate the niche between intraspecific and interspecific within the community, and avoid the direct competition between them, thus poromoting community growth.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.4
• /
• pp.238-245
• /
• 2015

Recently, Choi et al.(2015) showed that a numerical simulation of the SandyDuck experiment under a directional random wave environment agreed well with the experimental data including the wave height distribution of the random waves, the well-developed longshore current and its energetic fluctuation. Based on the Boussinesq modeling, this study investigates the effect of the alongshore variations, which are induced by not only the field topography but also the phase interaction of multidirectional random waves in the surf zone wave field, on the rip currents. As a result, transient rip currents as well as topographical rip currents cause the complicated surfzone circulation and mixing process due to their interactions in a multi-directional random wave condition while the topographical rip currents are dominant in a monochromatic wave condition.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.3
• /
• pp.191-196
• /
• 1999

In rice-barley cropping systems, efficient utilization of barley straw is essential, both to improve the soil fertility and to conserve the environment. In order to identify the effects of barley straw mulch rates in rice cultivation, a rice cultivar, 'Gancheogbyeo', was directly seeded on a no-tillage field synchronized with barley harvesting with five barley straw mulch rates, i.e., 0, 2.5, 5.0, 7.5 and 10.0 ton h $a^{-1}$ and agronomic characters of rice and soil nitrogen were determined. The increasing of barley straw mulch rates. Dominant weed species, chestnut, occurred in large amounts in no mulching or lower mulch rates than in higher mulch rates. The content of N $H_4$$_{＋}$-N in soil applied with high barley straw mulch rates was lower during the month after seeding, and then it was higher at heading date, compared with lower mulch rates or no mulch plot. As the barley straw rate increased, maximum tillering stage was delayed, and plant height was reduced. Although the lodging of rice plants was seldom observed in all plots, the breaking strength of the culm was significantly higher in the mulch rate of 10.0 ton h $a^{-1}$ . With an increase of barley straw mulch rate, the effective tillering rate and spikelet number $m^{-2}$ decreased while ripened grain ratio increased. The rice grain yield was slightly decreased with an increase of barley straw mulch rate, although significant differences were not found all barley straw mulch rates. These results suggest that there is no significant yield loss although the total barley straw production, approximately 5.0 ton h $a^{-l}$ in the present study, apply in the paddy for the following rice cultivation by no-tillage direct seeding.ect seeding.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.2
• /
• pp.1-12
• /
• 2017

This study aims to provide the basic habitat data for the alternative breeding sites of Family Ardeidae including Ardea cinerea, Egretta alba modesta, Egretta intermedia, Egretta garzetta, Bubulcus ibis and Nycticorax nyciticorax. Species numbers, flight directions for detecting foraging grounds and current vegetation structure were investigated nesting at Gunsan urban forest area. Data were collected over a period of 10 weeks, from 15 June - 31 August 2014. The total nest and population of Family Ardeida were 684 and 1,712 respectively. Percentage of birds observed flying in 8 major compass directions were as follows. 57.27% of all birds were observed flying northwest, 22.09% were observed flying south and 13.40% were flying north. For possible foraging areas, to the northwest, there are Geumgang river tidal flats, and to the south, paddy fields and streams within 2km. Flying directions by species (${\chi}^2=287.18$, P<.001, Cramer's V=0.12) and by seasons(${\chi}^2=839.94$, P<.001, Cramer's V=0.19) showed significant difference statistically. In relation between species and directions, 60.31% and 24.05% of Bubulcus ibis and 59.40% and 23.00% of Ardea cinerea were observed flying northwest and south respectively. Vegetation in the sites consist of an overstory of 3 to 7 species. At site 1, Pinus thunbergii was the dominant species and site 2, Chamaecyparis obtusa. Understory vegetation is composed of shrubs, saplings and small trees of Chamaecyparis obtusa, Quercus acutissima, Smilax china and Platycarya strobilacea. Egrets and herons usually nested at the dense population and canopy overlayed forest, and especially branches and leaves of smallwood with less than 10cm of breast height diameter were relatively severely damaged due to the nesting and excreta.