• Title/Summary/Keyword: dominant frequencies

Search Result 256, Processing Time 0.025 seconds

HUBBLE SPACE TELESCOPE IMAGING OF GLOBULAR CLUSTERS IN TWO FACE-ON LOW SURFACE BRIGHTNESS GALAXIES UGC 5981 AND UGC 6614

  • Kim, Ji-Hoon
    • Journal of The Korean Astronomical Society
    • /
    • v.44 no.5
    • /
    • pp.151-160
    • /
    • 2011
  • We present a study searching for globular cluster systems (GCSs) of two face-on low surface bright- ness galaxies (LSBGs), UGC 5981 and UGC 6614. Based on HSTWFPC2 images of F555Wand F814W filters, we detect 12 and 18 GC candidates for UGC 5981 and UGC 6614, respectively. Although these two LSBGs have very different bulge properties, they have very similar specific frequencies ($S_N$) of 0.1. However, $S_N$ ~ 0.1 is quite small even for their late morphological types, albeit within errors. This suggests that LSBGs have had star formation histories lacking dominant initial starburst events while accumulating their stellar masses through sporadic star formation activities.

Vibration Characterization of Cross-ply Laminates Beam with Fatigue Damage (피로 손상을 입은 직교 복합재료 적층보의 진동 특성)

  • 문태철;김형윤;황운봉;전시문;김동원;김현진
    • Proceedings of the Korean Society For Composite Materials Conference
    • /
    • 2001.05a
    • /
    • pp.1-4
    • /
    • 2001
  • A new non-destructive fatigue prediction model of the composite laminates is developed. The natural frequencies of fatigue-damaged laminates under extensional loading are related to the fatigue lift of the laminates by establishing the equivalent flexural stiffness reduction as a function of the elastic properties of sublaminates. The flexural stiffness is derived by relating the $90^{\circ}$-ply elastic modulus reduction, and using the laminate plate theory to the degraded elastic modulus and the intact elastic modulus of other laminate. The natural frequency reduction model, in which the dominant fatigue mode can be identified from the sensitivity scale factors of sublaminate elastic properties, provides natural frequency vs. fatigue cycle curves for the composite laminates. Vibration tests were also conducted on $[\textrm{90}_{2}\textrm{0}_{2}]_s$ carbon/epoxy laminates to verify the natural frequency reduction model. Correlations between the predictions of the model and experimental results are good.

  • PDF

Automotive Power Steering System Noise Source Identification using Frequency Analysis and Sound Intensity (자동차 조향 유압 시스템의 주파수분석 및 음향인텐시티 측정을 통한 소음원 분석에 관한 연구)

  • 최창환;임상규
    • Journal of KSNVE
    • /
    • v.9 no.4
    • /
    • pp.761-768
    • /
    • 1999
  • This paper presents an NVH test of Automotive power steering system performed at a half-car Test-rig. The test was done for neutral and full turn(or relief) conditions in steering wheel at a fixed rpm first, then followed by the same conditions for the rpm run-up. The sound intensity measurement verified the results from the frequency and order analysis, especially about the identification of major noise sources and their dominant frequencies. The results from thie study can be utilized in the system noise tuning when a new steering component is installed. In particular, the noise and vibration reduction at the relief condition will be accomplished through the knowledge obtained from this study and from the on-going research on the hose tuning techniques usign silencers and tuning cable inserted in the pressure hose.

  • PDF

Variation of Underwater Ambient Noise Observed at IORS Station as a Pilot Study

  • Kim, Bong-Chae;Choi, Bok-Kyoung
    • Ocean Science Journal
    • /
    • v.41 no.3
    • /
    • pp.175-179
    • /
    • 2006
  • The Ieodo Ocean Research Station(IORS) is an integrated meteorological and oceanographic observation base which was constructed on the Ieodo underwater rock located at a distance of about 150 km to the south-west of the Mara-do, the southernmost island in Korea. The underwater ambient noise level observed at the IORS was similar to the results of the shallow water surrounding the Korean Peninsula (Choi et al. 2003) and was higher than that of deep ocean (Wenz 1962). The wind dependence of ambient noise was dominant at frequencies of a few kHz. The surface current dependence of ambient noise showed good correlation with the ambient noise in the frequency of 10 kHz. Especially, the shrimp sound was estimated through investigations of waveform and spectrum and its main acoustic energy was about 40 dB larger than ambient noise level at 5 kHz.

Analysis of Vehicle Vibration Characteristics Using SEA (SEA를 이용한 차량 진동 특성 해석)

  • Chai, Jangbom;Kim, Taekwan
    • Transactions of the Korean Society for Noise and Vibration Engineering
    • /
    • v.15 no.6 s.99
    • /
    • pp.674-679
    • /
    • 2005
  • Statistical Energy Analysis(SEA) has been considered as a Possible method for predicting responses of complex structures, especially at higher frequencies. In this paper, an SEA model of a vehicle was built using 138 energy storing subsystems connected together using 1019 Junctions. SEAM software program was used to build and calculate the model. To demonstrate the accuracy of the SEA model, predicted response levels were compared with measured levels. The source Input levels were measured at the engine mounting parts. There is good agreement between the estimated and the experimental results. This paper also identifies some dominant energy flow paths from sources. It is finally presented that the SEA model can optimize the design parameters of vehicles using model parameters and energy flow paths.

Analysis of Vehicle Noise/Vibration Characteristics Using SEA (SEA를 이용한 승용차 소음/진동 특성 해석)

  • 김태환;채장범;임진수;고병식;안지훈
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 1998.04a
    • /
    • pp.75-80
    • /
    • 1998
  • Statistical Energy Analysis(SEA) has been considered as a possible method for predicting responses of complex structures, especially at higher frequencies. In this paper, an SEA model of vehicle was built using 138 energy storing subsystems connected together using 1019 junctions. SEAM software program was used to build and calculate the model. To demonstrate the accuracy of the SEA model, predicted response levels were compared with measured levels. The source input levels were measured at the engine mounting parts. For the vibration levels, the agreement between the calculation results and the experimental ones was found to be good. The energy flow between connected subsystems can be presented, because the analysis method is based on the estimation of the power flow between subsystems. This paper also identifies some dominant energy flow paths from sources. It is finally presented that the SEA model can optimize the design parameters of vehicles using model parameters and energy flow paths.

  • PDF

Trajectory Analysis on Acid Rain Observed in the Central Part of Korea During 1992 to 1993 (한반도 중부지방에서 관측된 1992-1993년 산성비의 특성과 공기 이동 경로 분석)

  • 전영신;조하만;권원태
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.10 no.3
    • /
    • pp.175-182
    • /
    • 1994
  • Backward trajectory analysis was carried out for 41 cases at 850 hPa level and 47 cases at 700 hPa level during the period from May 1992 to August 1993 in order to understand the impact of long-range transported pollutants from the neighboring countries on the distribution pattern of acid rain in Korea. The occurrence frequencies of acid rain were also investigated using the rainwater data observed at 5 stations in the central part of Korea, Kangwha, Seoul, Yangpyong, Hongchon, and Inje. The trajectory analysis showed that westerlies were dominant on 700 hPa level and southwesterlies on 850 hPa level in Korea. The pH values were also often lower when the trajectory was stagnant in the upper air over Korea. However, pH values were normally higher in all directions of flows during the Yellow Sand Period due to the increase of Positive ion components such as $Ca^{+2}$. The pH values were also normally higher when air flows from north or northeast.

  • PDF

Recovering missing data transmitted from a wireless sensor node for vibration-based bridge health monitoring

  • Kim, C.W.;Kawatani, M.;Ozaki, R.;Makihata, N.
    • Structural Engineering and Mechanics
    • /
    • v.38 no.4
    • /
    • pp.417-428
    • /
    • 2011
  • This paper presents recovering of missing vibration data of a bridge transmitted from wireless sensors. Kalman filter algorithm is adopted to reconstruct the missing data analytically. Validity of the analytical approach is examined through a field experiment of a bridge. Observations demonstrate that, even a part of recovered acceleration responses is underestimated in comparison with those responses taken from cabled sensors, dominant frequencies taken from the reconstructed data are comparable with those from cabled sensors.

Scaling methods for wind tunnel modelling of building internal pressures induced through openings

  • Sharma, Rajnish N.;Mason, Simon;Driver, Philip
    • Wind and Structures
    • /
    • v.13 no.4
    • /
    • pp.363-374
    • /
    • 2010
  • Appropriate scaling methods for wind tunnel modelling of building internal pressures induced through a dominant opening were investigated. In particular, model cavity volume distortion and geometric scaling of the opening details were studied. It was found that while model volume distortion may be used to scale down buildings for wind tunnel studies on internal pressure, the implementation of the added volume must be done with care so as not to create two cavity resonance systems. Incorrect scaling of opening details was also found to generate incorrect internal pressure characteristics. Furthermore, the effective air slug or jet was found to be longer when the opening was near a floor or sidewall as evidenced by somewhat lower Helmholtz frequencies. It is also shown that tangential flow excitation of Helmholtz resonance for off-centre openings in normal flow is also possible.

A forensic study of the Lubbock-Reese downdraft of 2002

  • Holmes, J.D.;Hangan, H.M.;Schroeder, J.L.;Letchford, C.W.;Orwig, K.D.
    • Wind and Structures
    • /
    • v.11 no.2
    • /
    • pp.137-152
    • /
    • 2008
  • This paper discusses engineering aspects of the rear-flank downdraft that was recorded near Lubbock, Texas on 4 June 2002, and produced a gust wind speed nearly equal to the design value (50-year return period) for the region. The general characteristics of the storm, and the decomposition of the time histories into deterministic 'running mean' and random turbulence components are discussed. The fluctuating wind speeds generated by the event can be represented as a dominant low-frequency 'running mean' with superimposed random turbulence of higher frequencies. Spectral and correlation characteristics of the residual turbulence are found to be similar to those of high-frequency turbulence in boundary-layer winds. However, the low-frequency components in the running-mean wind speeds are spatially homogeneous, in contrast to the low-frequency turbulence found in synoptic boundary-layer winds. With respect to transmission line design, this results in significantly higher 'span reduction factors'.