• 한국가구학회지
• /
• 제21권5호
• /
• pp.413-423
• /
• 2010

The study has been carried to evaluate the wood color, a typical element of visual and decorative effect, for seven major domestic softwoods using L*a*b* and chrominance ($\Delta$E*ab). The result showed that the values of whiteness, redness, and yellowness were positive at both sapwood and heartwood and there were no wood having a small chrominance difference ranged 0~0.5. There was also no wood having a chrominance difference ranging 0.5~3.0. Ginkgo biloba, Pinus koraiensis, and Larix kaempferi wood showed a little different chrominance, Taxus cuspidata, Pinus densiflora for. erecta, and Pinus densiflora wood substantial different chrominance, Juniperus chinensis wood largest different chrominance. It is concluded that the study results could be utilized as a data base in areas of wood craft and furniture and could open a way to substitute foreign imported woods.

• Journal of the Korean Wood Science and Technology
• /
• 제40권6호
• /
• pp.363-369
• /
• 2012

연륜경사에 따른 전단강도 실험이 국내에서 생산되는 목재에 대해 실시됐다. 연륜경사는 전단강도에 영향했고, 경사진 연륜에서 최대였다. 전단강도는 나사못 유지력을 예측하기 위한 식에 포함됐다. 나사못 유지력의 예측식은 No. 8 나사못의 실험결과와 비교하여 25 mm와 30 mm 길이에서 8% 이내로 작게 예측되었으나 18 mm와 38 mm에서는 큰 값을 보였다. 전단강도를 사용한 나사못 유지력의 예측값과 실험값 사이에는 연륜경사에 따라 큰 차이를 보이지 않았다.

• Journal of the Korean Wood Science and Technology
• /
• 제30권3호
• /
• pp.59-65
• /
• 2002

EYM (European Yield Model), which was adopted in NDS (National Design Specification for wood construction), has been used in Korea without any verification of the analysis of bolted wood connections. In the case of applying lumber from domestic small diameter logs, however, there are some problems with the direct application of EYM ; 1) relatively low dowel bearing strength and dimensional stability due to a large amount of immature wood, 2) effect of MC (moisture contents) on the dowel bearing strength of wood and the yield load of a bolted connection. To evaluate the strength properties of bolted connections with lumber from domestic small diameter logs, effect of MC on the dowel bearing strength of wood was investigated and double shear bolted connection tests were performed. As the MC of wood increased, the dowel bearing strength was linearly reduced, even under 19% MC, which showed that adjustment, not considered in NDS, was required. Double shear bolted connection tests indicated that effect of MC on yield load should be considered in order to determine design value.

• 한국가구학회지
• /
• 제19권5호
• /
• pp.365-374
• /
• 2008

Understanding of the properties of woods is important in wood utilization. Until now, traditional wooden houses(Korean-style house, Buddhist temple, royal palaces) and furniture have been made of domestic woods with the experience of a craftsman rather than the scientific knowledge on woods. Because of concrete-based houses and imported wood products and furniture, even wood craftsmen decrease in number, too. This study was carried out to collect wood samples growing in Korea and to measure wood characteristics. Anatomical, physical and mechanical properties of 37 wood species were investigated.

• Journal of the Korean Wood Science and Technology
• /
• 제46권5호
• /
• pp.553-564
• /
• 2018

본 총설에서는 목재연소에 따른 배출물의 종류, 발생 체제 및 인체 유해성 정도를 설명하고, 목재펠릿과 관련된 안전성, 연소에 의한 배출물의 허용량 등에 대한 국내외 기준을 비교하여 보고한다.

• 한국가구학회지
• /
• 제24권1호
• /
• pp.51-59
• /
• 2013

In this study, a dwelling type of Korea and Japan was compared, and consumption rate of domestic timber and its usage was also investigated. In Korea, dwelling type of apartment which constructed by iron and steel-concrete is main shared, but a detached house which is shared at 60% of dwelling type of Japan is mainly constructed by timber. And the rate of the consumption of domestic wood in Japan is 73%. In Japan, there is an effort to substitute imported wood to domestic timber through the promotion of using of domestic timber. Whereas the needs on using of domestic timber gradually emerged. So, the legal about sustainable use of wood is approved by the National Assembly on May 2012. There is not active movement in the aspect of using of domestic timber yet. These causes to the geographical and environmental characteristics, but industry, policy, and the difference of recognize on domestic timber utilization is thought to do greater influence. Hence, it is recommended to make a portfolio of both balanced domestic timber usage and the change of awareness of people by referring to the example of Japan.

• Journal of the Korean Wood Science and Technology
• /
• 제49권6호
• /
• pp.591-601
• /
• 2021

Recently it is trend to increase wood use as carbon neutral materials, there is recognized to need necessarily durability improvement of wooden building. It is very rare to report existing on the identification of isolates causing discoloration in domestic weathered wooden building used for long period. The objective of this study was identification of fungi that cause discoloration on the exteriors of weathered domestic wooden buildings in the southern part of South Korea. Our findings can be helpful to establish protection technology for weather deterioration of domestic wooden buildings. Wood chip samples presumed to be contaminated with sapstain fungi were collected from the surface of wooden members used in wooden buildings at Jangheung, Jeollanam-do (two locations, #13 and #14), and Jeju Island (two locations, #31 and #33). The growth of microorganisms was confirmed by performing culture tests for the collected samples, and fungi were isolated, purified, and identified. The results indicated that the fungal strains isolated from wooden buildings #13 and #14 at Jangheung, Jeollanam-do, were 99.83% and 100% homologous to Aureobasidium melanogenum, respectively. For wooden building #31 at Jeju Island (two locations), the fungal strain isolated was 100% homologous to A. melanogenum, which is the same species isolated from the wooden buildings at Jangheung. The fungal strain isolated from wooden building #33 (Jeju Island) had 99.83% homology with A. pullulans, which is commonly found in wood degraded by weather or ultraviolet rays. Our findings can be utilized as a basis for establishing protection technology in domestic wooden buildings.

• Journal of Forest and Environmental Science
• /
• 제30권4호
• /
• pp.362-369
• /
• 2014

This study investigated physical properties and combustion gas characteristics for 8 types of wood pellets (4 domestic and 4 imported products) distributed in the domestic market. Results showed that most pellet types were first-grade pellets in the wood pellet quality standards in Korea with the exception of 3 pellet types from K company (second-grade in mechanical durability), G company (off-grade in nitrogen content) and P company (second-grade in ash percentage). Mixed pellets which contained more lignin and sap content were higher in mechanical durability (%) than that of white pellets. From the combustion gas analysis results, NOx emitted from all pellets combustion was at acceptable levels for national emission standard of the Clean Air Conservation Act except for pellets from G company. In addition, CO levels from all types of wood pellets were acceptable except for pellets from D company and domestic pellets were higher CO levels than imported pellets. These results indicate the higher CO levels in domestic pellets due to the usage of forest thinning materials including logging debris which usually had the high content of bark.

• Journal of the Korean Wood Science and Technology
• /
• 제48권5호
• /
• pp.608-617
• /
• 2020

For efficient use and expansion of domestic small- and medium-diameter woods, cross-laminated wood panels composed of tropical hardwoods and domestic temperate woods were fabricated, and the bending creep behavior under long-term loading was investigated. The bending creep curve of the cross-laminated wood panels showed an exponential function graph with a sharp increase at the top right side. The wood panel composed of a teak top layer and larch core and bottom layers recorded the highest initial deformation, and that composed of a merbau top layer and tulip core and bottom layers showed the lowest initial deformation. Creep deformation of the cross-laminated wood panels showed the highest value in that composed of a teak top layer and larch core and bottom layers and showed the lowest value in that composed of a merbau top layer and tulip core and bottom layers. The obtained creep deformation is 3.1-4.3 times that of merbau, however, it is remarkably lower than that of tulip and larch. The highest relative creep was recorded by the wood panel composed of merbau top layer and larch core and bottom layers, whereas that composed of the teak top layer and tulip core and bottom layers showed the lowest relative creep.

• Journal of the Korean Wood Science and Technology
• /
• 제43권1호
• /
• pp.36-42
• /
• 2015

국산재에 대한 전단탄성계수와 실질탄성계수를 구하기 위해 서로 다른 세장비에 대한 휨강도실험 및 응력파실험을 실시했다. 국산재의 휨 성질들은 12%로 조습 처리된 무결점 시편으로 측정하였다. 휨강도와 탄성계수는 세장비(L/D)에 영향을 받아 세장비가 증가하면 증가하였다. 전단탄성계수(G)와 실질탄성계수는 서로 다른 세장비에 대한 휨강도 실험 및 응력파실험의 결과를 이용하여 계산했고, 그 값들은 국산재가 구조용도로 사용된다면 유용할 것이다. 하지만 이들 결과들은 제한된 수의 시편들에 대한 값으로 이들 수종의 실질 평균값을 나타내진 않는다.