• Journal of the Korean Wood Science and Technology
• /
• v.39 no.5
• /
• pp.406-419
• /
• 2011

This study was carried out to offer basic information on the wood anatomy of domestic yellow-poplar (Liriodendron tulipifera L.), a new plantation species selected by Korea Forest Service as one of the promising hardwood and bioenergy sources of the future, through comparison of stem wood with root wood in the qualitative and quantitative features. In the qualitative anatomical features, growth rings were distinct in stem wood but relatively less distinct in root wood. And stem wood appeared to have pores in radial multiples of 2 to 5, sometimes clusters but root wood to have pores in radial multiples of 2 to 3, rarely clusters. And numbers of bars in scalariform perforation plates were somewhat numerous in vessel elements of root wood than in those of stem wood. Interestingly, on the other hand, more extraneous materials in the wood rays of tap root than in those of lateral root and stem were confirmed in the chemical composition analyses. In the quantitative anatomical features, pore densities were significantly greater but vessel elements were considerably narrower in stem wood than in root wood. Vessel elements and wood fibers of root wood were considerably longer than those of stem wood. Rays were somewhat more numerous in stem wood than in root wood, and only ray heights of stem wood were more or less greater in cell numbers but both ray heights and widths of stem wood were lower in dimension than those of root wood. The anatomical differences between stem wood and root wood were thought to be associated with different growth environments between the stem above ground and the root below ground.

• Journal of Environmental Science International
• /
• v.12 no.2
• /
• pp.217-225
• /
• 2003

Samples of size-fractionated PM10 (airborne particulate matter with aerodynamic diameter less than $10\mu\textrm{m}$) were collected at an urban site in Jeju city from May to September 2002. The mass concentration and chemical composition of the samples were measured. The data sets were then applied to the CMB receptor model to estimate the source contribution of PM10 in Jeju area. The average PM10 mass concentration was 28.80$\mu\textrm{g}/m^3$ ($24.6~33.49\mu\textrm{g}/m^3$), and the FP (fine particle with aerodynamic diameter less than $2.l\mu\textrm{m}$ fraction in PM10 was approximately 8% higher than the CP (coarse particle with aerodynamic diameter greater than $2.l\mu\textrm{m}$ and less than $10\mu\textrm{m}$ fraction in PM10. The CP composition was obviously different from the FP composition, that is, the most abundant water soluble species was nitrate ion in the FP, but sulfate ion in the CP. Also sulfur was the most dominant element in the FP, however, sodium was that in the CP. From CMB receptor model results, it was found that road dust was the largest contributor to the CP mass concentration (45% of the CP) and ammonium nitrate, domestic boiler, and marine aerosol were major sources to the CP mass. However, the secondary aerosol was the most significant contributor to the FP mass concentration (45% of the FP). In this study, it was suggested that the contributions of soil dust and gasoline vehicle became very low due to collinearity with road dust and diesel vehicle, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.5
• /
• pp.626-631
• /
• 2005

Nitric oxide (NO) derived from inducible nitric oxide synthase (iNOS) is involved in cell apoptosis, which contributes to luteal regression and luteolysis in some species. In large domestic animals, no direct evidence for the relationship between NO and cell apoptosis in the process of corpus luteum regression is reported. The present study was conducted to investigate the localization of iNOS on porcine corpora lutea (CL) during the oestrus cycle and its relation to cell DNA fragmentation and CL regression. According to morphology, four luteal phases throughout the estrous cycle were defined as CL1, CL2, CL3 and CL4. By isoform-specific antibody against iNOS, the immunochemial staining was determined. Luteal cell DNA fragmentation was determined by flow cytometry. The results showed that no positive staining for iNOS was in CL1 and that iNOS was produced but limited to the periphery of CL2, while in the CL3, the spreading immunochemical staining was found inside the CL. No iNOS positive staining was detected in CL4. Meanwhile, DNA fragmentation increased dramatically when CL developed from CL2 to CL3 (p<0.05). In CL4, higher proportion of luteal cells still had fragmented DNA than that of luteal cells from CL1 or CL2 (p<0.05). These results indicate that iNOS expression is closely related to luteal cell apoptosis and then to luteal regression.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.9
• /
• pp.1286-1295
• /
• 2008

Leptin is produced by adipocytes and its role in the regulation of lipid metabolism, feed intake, productive and reproductive performance of domestic animal species has been greatly stressed and extensively investigated in recent years. This study was conducted to develop a radioimmunoassay (RIA) for the estimation of plasma bovine leptin and to determine plasma leptin concentration in fattening Japanese Black cattle (Wagyu) and its crossbreds at commercial farms. Relationships of plasma leptin with plasma vitamin A and age of crossbred cattle were also determined. Recombinant bovine leptin (rbleptin) was produced by the E. coli overexpressed leptin as a GST (glutathione S-transferase)-fusion protein. Then antiserum against bovine leptin was obtained by its immunization in rabbits. Using this antiserum, a bovine specific RIA was developed and plasma leptin level was determined in 120 crossbred fattening cattle (WagyuHolstein, 50:50) at commercial farms. The plasma leptin level increased with the age of cattle and its level was greater in the crossbred heifers than in the steers. Plasma vitamin A level was negatively correlated with plasma leptin level in crossbred heifers and steers. This relationship was stronger in heifers than in steers. Plasma leptin was gradually increased with advancing age in fattening Wagyu cattle. In conclusion, development of a bovine specific RIA to estimate plasma leptin will contribute to better understanding of the role of leptin in cattle.

• KSBB Journal
• /
• v.20 no.6
• /
• pp.464-469
• /
• 2005

For the biological production of hydrogen, a new fermentative hydrogen-producing bacterium, Enterobacter sp. SNU-1453, was isolated from a domestic landfill. During the culture of this bacterium, pH significantly decreased with the accumulation of various organic acids, and consequently this inhibited the production of hydrogen. It was found that the metabolic flux in this bacterium depended on the pH and affected the hydrogen production. A butanediol pathway was dominant during the fermentation when pH was not controlled. By controlling the pH at 7 this pathway can be shifted to a mixed acid pathway, which is favorable to the production of hydrogen.

• Korean Chemical Engineering Research
• /
• v.44 no.1
• /
• pp.81-86
• /
• 2006

This study was carried out to investigate the antimicrobial and antioxidant activities for applications of food additives and medicine using Rumex crispus which widely grown in domestic area. Antimicrobial activities of extract fractions were observed in all microbial species except for Pseudomonas areuginosa. Especially, Vibrio vulificus and Saccharomyces cerevisiae presented obvious antimicrobial activity. Antioxidant activities of the fractions of R. crispus extract were determined by DPPH radical scavenger activity. The fraction of ethyl acetate was presented similar antioxidant activities compared with that of BHA and ascorbic acid. Also, ethyl acetate fraction contained higher phenolic compounds than that of others. The antioxidant activity in the fractions of R. crispus extract was closely related with the content of phenolic compounds in that.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.4
• /
• pp.606-614
• /
• 2000

This study was carried out for comparing Listeria strains developing genetic markers for Listeroa strains using Listeria sp. genetic markers using Randomly Amlymorphic DNA (RAPD) analysis method. Five of RAPD promers (OPA-01, OP-26-01, OP-26-02, OPB-01, OP-26-10) showed the distinctive polymorphism among Kisteria sp. isolated from domestic foods. RAPD-PCR with five arbitrary primers produced 76 DNA polymorphism. Among them, OPA-01 and OP-26-01 primers produced about 1.5kb and 0.7 kb amplified DNA fragments for all the Listeric relationships of Listeria sp. using NTSYS program were grouped into 7 clusters and showed 0.54 to 0.93 similarity among strains. Especially, No. 3 and No. 20 isolates showed the genetically most similar relationship by 0.94, and No. 7 and No. 24, or No. 7 and N0. 45 isolates showed the least similarty by 0.54 From these results, RAPD analysis method deemed to be successfully applied the classification and genetic analysis for Listeria sp. isolates.

• Fisheries and Aquatic Sciences
• /
• v.6 no.1
• /
• pp.13-19
• /
• 2003

Genomic DNA from the muscle of marsh clam (Corbicula leana) from Gochang, Muan and a Chinese site was extracted to identify genetic differences and similarity by randomly amplified polymorphic DNAs-polymerase chain reaction (RAPD- PCR). Out of 20 primers, seven primers produced amplified fragments which were consistently polymorphic. A total of 1,246 amplified products were produced of which 530 were polymorphic $(42.5\%)$. The number of polymorphic bands produced per primer varied from 40 to 122 with an average of 75.7 in marsh clam from Gochang. 3.28 of the 23.0 polymorphic bands per lane were found to be polymorphic. Also, about $4.34\%$ of total polymorphic bands were specific to marsh clam from Gochang. The major common bands of 0.28 kb generated by primer OPB-15 (GGAGGGTGTT) were present in every individuals, which were polymorphic. This common bands in every individuals should be diagnostic of specific strains, species and/or their relatedness. Primer OPB-19 (ACCCCCGAAG) produced the highest number of 12 specific bands. The intra-population variation was revealed in the band patterns identified by this primer. The random primer OPB-12 (CCTTGACGCA) yielded the amplified fragments which were consistently polymorphic between the marsh clams from Gochang and from Muan. This primer produced a total of 77 polymorphic bands: 31 bands from Gochang, 14 from Muan and 32 from the Chinese populations. An average of polymorphic bands were 1.8 from Gochang and 2.5 from the Chinese populations. This value obtained from the Chinese population was higher than those from the two domestic populations. Generally, the RAPD polymorphism generated by these primers may be useful as a genetic marker for strain or population identification of marsh clam.

• Journal of Animal Science and Technology
• /
• v.55 no.2
• /
• pp.103-107
• /
• 2013

A crucial first step in the planning of any scientific experiment is to evaluate an appropriate sample size to permit sufficient statistical power to detect the desired effect. In this study, we investigated the optimal sample size of quantitative trait locus (QTL) linkage analysis for simple random sibship samples in pedigreed chicken populations, under the variance component framework implemented in the genetic power calculator program. Using the program, we could compute the statistical power required to achieve given sample sizes in variance component linkage analysis in random sibship data. For simplicity, an additive model was taken into account. Power calculations were performed to relate sample size to heritability attributable to a QTL. Under the various assumptions, comparative power curves indicated that the power to detect QTL with the variance component method is highly affected by a function of the effect size of QTL. Hence, more power can be achievable for QTL with a larger effect. In addition, a marked improvement in power could be obtained by increasing the sibship size. Thus, the use of chickens is advantageous regarding the sampling unit issue, since desirable sibship size can be easily obtained compared with other domestic species.

• Ecology and Resilient Infrastructure
• /
• v.5 no.1
• /
• pp.45-53
• /
• 2018

Ecological networks can be generally classified into core areas, buffer zones, and corridors. Particularly, buffer zones connect core areas or ecological corridors, and preserve ecological network by reducing the impact from outside. We examined related laws and researches about buffer zone establishment associated with the resources of high ecological and conservation value to find out more researches are needed. In this study, we investigated various examples of the criteria for establishing buffer zones at domestic and overseas. Based on the results of railway environmental impact assessment and railway construction guidelines, we analyzed the application methods applicable to the railway development area and proposed the criteria to evaluate land cover status, species diversity, rarity, and connectivity. Through this study, the environmental and ecological value around the development area of the railroad was examined to reduce the environmental damage from railroad construction.