• Journal of Energy Engineering
• /
• v.7 no.1
• /
• pp.122-130
• /
• 1998

A simplified heat transfer model for the cooling capability of the AP 600 PCCS is proposed I this paper. As the PCCS domain is covered with very thin and long water film, it is phenomenologically divided into 3 regions; water entrance effect region, asymptotic region, and air entrance effect region. As the length of the asymptotic region is estimated to be over 90% of the whole domain, the phenomena in the asymptotic region is focused. Using the analogy between heat and mass transfer phenomena in a turbulent situation, a new dependent variable combining temperature and vapor mass fraction was defined. The similarity between the PCCs phenomena in the asymptotic region and the buoyant air flow phenomena on a vertical heated plate is derived. Using the similarity, the simplified heat transfer correlations for the interfacial heat fluxes and the ratios of latent heat transfer to sensible heat transfer were established. To verify the accuracy of the correlation, the results of this study were compared with those of other numerical analyses performed for the same configuration and they are well within the range of 15% difference.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.152-156
• /
• 1996

Identification of incipient faults and various events on the distribution feeders is very important to develop the prediction method of fault symptom. In this paper, the configuration of data acquisition system to get the real field data is introduced. And the Quantification of incipient faults is also discussed. Based on the acquired field data, how the time domain parameters of voltage and current signals are applied to this research is partly introduced.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.11a
• /
• pp.194-195
• /
• 2019

In this paper, we propose a frequency location adaptive hard-decision quantization (HDQ) scheme for video coding. A threshold for zero quantized level is adaptively applied to unquantized transform coefficients based on its frequency location in the transform domain. The proposed method achieves an average of 1.13%, 1.57%, and 1.53% of bit-rate reduction in BDBR sense compared to the conventional HDQ scheme respectively in Y, Cb, and Cr under the all intra encoding configuration.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.1175-1180
• /
• 1991

The purpose of this paper is to improve the matching accuracy in identifying corresponding points in the area-based matching for the processing of stereo vision. For the selection of window size, a new method is proposed based on frequency domain analysis. The effectiveness of the proposed method is confirmed through a series of experiments. To overcome disproportionate distortion in stereo image pair, a new matching method using the warped window is also proposed. In the algorithm, the window is warped according to imaging geometry. Experiments on a synthetic image show that the matching accuracy is improved by 14.1% and 4.2% over the rectangular window method and image warping method each.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2004.06a
• /
• pp.24-24
• /
• 2004

• Journal of Convergence Society for SMB
• /
• v.6 no.4
• /
• pp.151-156
• /
• 2016

It has been constantly demanding for effective way to improve software development productivity and automation. In this paper, we did research to configure the component assets to reuse design information from the design phase domains based on the DMI. It is necessary abstracted information architecture of an independent platform development environment to reuse design information on the design stage. Also, It should be based on a well-designed to support the design architecture of the application domain. Therefore, in this paper, I want to use the DMI architecture that can be represented by formal level of architectural design information platform and application domain area. It is able to decomposition architecture asset with the part design information from the design phase composition or a high level of abstraction on DMI. Therefore, the metadata structure of the asset architecture will support a structure which can reuse the structure-based design of the domain areas.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.4
• /
• pp.33-47
• /
• 1992

A study for the material and geometric nonlinear analysis of segmentally erected cable-supported prestressed concrete plane frames including the time-dependent effects due to load history, creep, shrinkage, aging of concrete, and relaxation of prestressing steel and cable is presented. Updated Lagrangian formulation is used to account for the nonlinear behavior of the structure. For the time-dependent analysis. the time domain is divided into a discrete number of intervals, and a step-forward integration is performed as the solution progresses in the time domain. At each time step. a nonlinear finite element analysis is performed in the space domain. Segmental erection methods are implemented by providing the capability to change the configuration of the structure at any time step of the solution. The computer program CFRAME is developed and a series of numerical examples are presented to study the validity of the program.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.2049-2057
• /
• 2014

In this paper, a numerical method for analyzing coupling between high-altitude electromagnetic pulse (HEMP) as external field and a shielded twisted pair (STP) cable is proposed, which is based on an expanded chain matrix. Load responses of electromagnetic (EM) field excitation in uniform transmission line (TL) are solved by Baum-Liu-Tesche (BLT) equations in frequency domain, however, it is difficult to apply BLT equations to solve load responses of STP cable because the iteratively changing configuration of each twisted pairs are involved in cable. To avoid this problem and decrease memory and CPU time, we proposed the expanded chain matrix modeling method that is calculated using ABCD parameters, and applied multi-conductor transmission line (MTL) theory to consider the EMP coupling effectiveness of each twisted pairs. The results implemented by the proposed method are presented and compared with those obtained by the finite-difference time domain (FDTD) method as a kind of 3D full wave analysis.

• Economic and Environmental Geology
• /
• v.18 no.1
• /
• pp.41-47
• /
• 1985

The filtering ability of $J_0$ and $J_1$ digital linear filters is compared by means of an adaptive linear filter. Any $J_0$ domain Hankel transform integral can be transformed mathematically into its corresponding $J_1$ domain integral. The apparent resistivities for any electrode configuration employed in resistivity soundings can be evaluated with a single $J_1$ filter. The $J_1$ filter usually has similar accuracy to, but shorter length than, the corresponding $J_0$ filter. The domain transformation from $J_0$ to $J_1$ enables us to use effective expressions of apparent resistivity, involving $J_1$ alone, not only for Schlumberger but also for dipole-dipole array.

• Journal of Digital Contents Society
• /
• v.10 no.1
• /
• pp.147-157
• /
• 2009

Configuration and data management system to support processes for the weapon system should support the concurrent engineering and collaborative activities for various documents, drawings, part informations and structural informations, etc. which are produced through R&D processes for a long time. This thesis attempts to identify major functions in the configuration and data management system to support processes for the weapon system R&D into services based on a service oriented architecture. In order to identify major services in the configuration and data management system to support processes for the weapon system R&D, a configuration and data management system to support processes for the weapon system R&D was proposed with a service oriented architecture with four layers including a service consumer layer, a business service layer, an application service layer and a application layer, and major services were identified for each layer. In order to identify major services in four layers, this thesis adopted a bottom-up approach to identify the necessary business services from a well-defined domain implementation system rather than a top-down identification method in general. This thesis tried to identify the essential services in implementing the configuration and data management system to support processes for the weapon system R&D as a system based on the service oriented architecture using such a bottom-up service identification method while limiting those services to the general PDM system aspects and the business areas of the configuration and data management system to support processes for the weapon system R&D.