• 제목/요약/키워드: dodecane

검색결과 113건 처리시간 0.028초

Head Space Analysis에 의한 n-Dodecane-1-Decanol, n-Dodecane-1- Dodecanol과 1-Decanol-1-Dodecanol계의 등온 기액 평형 (Isothermal vapor-liquid equilibria of n-Dodecane-1-Decanol, n-Dodecane-1 -Dodecanol and 1-Decanol-1-Dodecanol systems by Head Space Analysis)

  • 박소진;강용;이태종;최명재;이규완
    • 에너지공학
    • /
    • 제2권2호
    • /
    • pp.225-230
    • /
    • 1993
  • n-dodecane-1-decanol, n-dodecane-1-dodecanol 및 1-decanol-1-dodecanol계 의 14$0^{\circ}C$ 등온 기액평형 데이타를 static method로써 Head Space Gas Chromatography (H.S.G.C)를 이용하여 측정하였다. 액상의 비이상성을 고려하여 계산된 활동도계수는 Margules, Van Laar, Wilson, NRTL g$^{E}$ 모델을 이용하여 상관관계를 구하였으며, Redlich-Kister의 열역학적 일치성 시험을 통해 데이타의 신빙성을 확인하였다. 측정한 이성분계중 n-dodecane-1-decanol계는 최소 공비점을 가짐을 알 수 있었다.

  • PDF

Effect of Dodecane on the Surface Structure and the Electronic Properties of Pentacene on Modified Si (001)

  • Kim, Beom-sik;Kang, Hee Jae;Seo, Soonjoo;Park, Nam Seok
    • Applied Science and Convergence Technology
    • /
    • 제25권2호
    • /
    • pp.28-31
    • /
    • 2016
  • The structural and the electronic properties of pentacene on modified Si (001) were investigated using scanning tunneling microscopy (STM), atomic force microscopy (AFM) and ultraviolet photoelectron spectroscopy (UPS). Dodecane was used to modify Si (001) substrates and then pentacene was deposited on dodecane/Si (001). Our STM results show a uniform distribution of aggregated dodecane molecules all over the clean Si (001). The surface structure of pentacene on dodecaene/Si (001) examined by AFM is analogous to that of pentacene on $SiO_2$. The UPS data showed that the work function of pentacene on clean Si (001) and pentacene on modified Si (001) with dodecane was 6.41 and 5.57 eV, respectively. Our results prove that dodecane results in the work function difference between pentacene on clean Si (001) and pentacene on dodecane/Si (001).

독립된 두 레이저를 이용한 n-Dodecane 에멀전 단일 액적의 분열 및 점화 현상의 관찰 (Breakup and Ignition Observation of n-Dodecane Emulsion Single Droplet using Two Pulse Lasers)

  • 장규민;정용진;이민정;김남일
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.213-214
    • /
    • 2015
  • Breakup and ignition of single droplet were experimentally investigated using two independent Nd-YAG lasers. The emulsified fuel was made from n-dodecane and water while varying the relative volumetric fraction. As a result of visualization, breakup and ignition behaviors were dependent on the fraction. Luminosity from the secondary droplets increased as the water fraction decreased. Ignition did not occur below 80% of the n-dodecane fraction.

  • PDF

Enhancement of Hyaluronic Acid Production by Batch Culture of Streptococcus zooepidemicus via the addition of n-Dodecane as an Oxygen Vector

  • Liu, Long;Yang, Haiquan;Zhang, Dongxu;Du, Guocheng;Chen, Jian;Wang, Miao;Sun, Jun
    • Journal of Microbiology and Biotechnology
    • /
    • 제19권6호
    • /
    • pp.596-603
    • /
    • 2009
  • This study aimed to examine the influence of adding an oxygen vector, n-dodecane, on hyaluronic acid (HA) production by batch culture of Streptococcus zooepidemicus. Owing to the high viscosity of culture broth, microbial HA production during 8-16 h was limited by the oxygen transfer coefficient $K_La$, which could be enhanced by adding n-dodecane. With the addition of n-dodecane to the culture medium to a final concentration of 5% (v/v), the average value of $K_La$ during 8-16 h was increased to $36{\pm}2h^{-1}$, which was 3.6 times that of the control without n-dodecane addition. With the increased $K_La$ and dissolved oxygen (DO) by adding 5% (v/v) of n-dodecane, a 30% increase of HA production was observed compared with the control. Furthermore, the comparison of the oxygen mass transfer in the absence and presence of n-dodecane was conducted with two proposed mathematical models. The use of n-dodecane as an oxygen vector, as described in this paper, provides an efficient alternative for the optimization of other aerobic biopolymer productions, where $K_La$ is usually a limiting factor.

노말도데칸의 인화점과 최소발화온도 측정에 의한 연소위험성 고찰 (The Investigation of Combustible Hazard by Measurement of Flash Point and Autoignition Temperature of n-Dodecane)

  • 하동명
    • 한국화재소방학회논문지
    • /
    • 제25권2호
    • /
    • pp.120-125
    • /
    • 2011
  • 노말도데칸의 안전한 취급을 위해서 25에서 폭발한계를 고찰하였고, 하부인화점과 발화지연시간에 의한 발화온도를 측정하였다. 공정의 안전을 위해서 노말도데칸의 폭발하한계는 0.60Vol.%, 상한계는 4.7Vol.%를 추천하였고, 하부인화점은 밀폐계에서 $77^{\circ}C$$80^{\circ}C$와 개방식에서 $84{\sim}87^{\circ}C$로 측정되었다. ASTM E659-78 장치를 사용하여 자연발화온도와 발화지연시간을 측정하였고, 최소자연발화온도는 $222^{\circ}C$ 측정되었다.

UNIFAC 그룹 기여 모델에 의한 n-Octnae+n-Decane 계와 n-Octane+n-Dodecane 계의 인화점 계산 (Flash Point Calculation for n-Octane+n-Decane and n-Octane+n-Dodecane by UNIFAC Group Contribution Model)

  • 하동명;이성진
    • 한국안전학회지
    • /
    • 제30권4호
    • /
    • pp.86-91
    • /
    • 2015
  • The flash point is used to categorize inflammable liquids according to their relative flammability. Such a categorization is important for the safe handling, storage, and transportation of inflammable liquids. The flash point temperature of two binary liquid mixtures(n-octane+n-decane and n-octane+n-dodecane) has been measured for the entire concentration range using Seta-flash closed cup tester based on the ASTM D3278 method. The closed cup flash point temperature was estimated using the UNIFAC(Universal Functional Activity Coefficient) group contribution model. The experimentally derived flash point was also compared with the predicted flash point from the UNIFAC model. The UNIFAC model is able to estimate the flash point fairly well for n-octane+n-decane mixture and n-octane+n-dodecane mixture.

A PRACTICAL METHOD FOR THE DISPOSAL OF RADIOACTIVE ORGANIC WASTE

  • Kim, Kil-Jeong;Shon, Jong-Sik;Ryu, Woo-Seog
    • Nuclear Engineering and Technology
    • /
    • 제39권6호
    • /
    • pp.731-736
    • /
    • 2007
  • Radioactive organic wastes containing acetone, alcohol, and particularly tributyl phosphate (TBP)/dodecane contaminated with uranium are extracted from the PUREX process and the decontamination of related equipment. An evaporation method that utilizes existing DU oxidation apparatuses and ventilation systems and a typical muffle furnace installed with an aspirating system are adopted. A separation method using phosphoric acid especially for the TBP/dodecane waste is also studied and evaluated. The results show that a simple evaporation process is utilizable for wastes containing acetone or alcohol with a lower boiling point. A modified muffle furnace is more appropriate to dispose directly of organic wastes having a higher boiling point, such as TBP/dodecane, without generating a condensed waste solution. It is recommended that, when the uranium concentration of TBP/dodecane waste is much higher than stipulated levels, separation technology should be applied to remove uranium from the mixture. Each type of solvent after separation can then be considered disposable below the regulatory limit in the modified furnace discussed in this study.

n.Dodecane-1.Decanol-1.Dodecanol 삼성분계 및 각 이성분계의 15 mbar 정합 기액평형 (Isobaric vapor-liquid equilibria for ternary and each corresponding binaries of the system n.Dodecane-1.Decanol-1.Dodecanol at 15 mbar)

  • 박소진;이태종
    • 에너지공학
    • /
    • 제2권3호
    • /
    • pp.308-314
    • /
    • 1993
  • 15mbar 정합하에서 n.dodecane-1.decanol-1.dodecanol 혼합물의 삼성분계 및 각 이성분계의 기액평형 데이타와 비점을 측정하였다. 측정된 기액평형 데이타는 g$^{E}$ 모델식 인 Margules, van Laar, Wilson, NRTL, UNIQA 식에 의해 상관관계를 알아보았다. 이성분계 데이타는 Redlich-Kister의 적분법에 의해 열역학적으로 검토하였으며, 삼성분계 데이터 역시 McDermott-Ellis에 의한 two-point consistency test에 의해 질적으로 검토되었다. 이성분계의 기액평형 데이타 중에 n.dodecane-1.decanol계 만이 공비점을 보였다.

  • PDF

삼성분계 혼합물인 n-Nonane+n-Decane+n-Dodecane 계의 하부인화점 측정 (Measurement of Lower Flash Point for Ternary Mixture, n-Nonane+n-Decane+n-Dodecane System)

  • 하동명;이성진
    • 한국가스학회지
    • /
    • 제20권6호
    • /
    • pp.31-36
    • /
    • 2016
  • 인화점은 액체 용액의 가장 중요한 인화성 지표 중 하나이다. 인화점은, 가연성 증기의 공기 속 농도가 점화가 발생하기에 충분할 때의 온도 중 가장 낮은 온도이다. 본 연구에서는 삼성분계 액체 용액인, n-nonane+n-decane+n-dodecane acid 계의 인화점을 Seta flash 밀폐식 장치를 사용하여 측정하였다. 실험값은 라울의 법칙을 활용한 방법과 실험식에 의한 계산값과 비교되었다. 그 결과 실험식에 의한 계산값이 라울의 법칙에 의한 계산값 보다 측정값을 잘 모사하였다.