• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.1
• /
• pp.69-76
• /
• 2013

This paper is concerned with speed tracking control problem for permanent-magnet synchronous drives (PMSM) in the presence of an variable load torque and unknown model parameters. The disturbance of speed control caused by inaccuracy of model parameters has been investigated. A load torque observer has been proposed to observe the load torque and estimate the disturbance caused by inaccuracy of model parameters. Both inertia and friction coefficient are identified in gradient descent approach. The stability condition of the observer has also been studied. Furthermore an improved feed-forward control has been introduced to reduce the speed track error. The proposed control strategy has been verified by both simulation and experimental results.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.5
• /
• pp.592-599
• /
• 1998

In this paper, we design a tracking controller which satisfies transient response specifications and maintains tracking error within a tolerable limit for the uncertain track-following system of an optical disk drive. To this end, a robust $H_{\infty}$ control problem with regional stability constraints and sinusoidal disturbance rejection is considered. The internal model principle is used for rejecting the sinusoidal disturbance caused by eccentric rotation of the disk. We show that a condition satisfying the regional stability constraints can be expressed in terms of a linear matrix inequality (LMI) using the Lyapunov theory and S-procedure. Finally, a tracking controller is obtained by solving an LMI optimization problem involving two linear matrix inequalities. The proposed controller design method is evaluated through an experiment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.1
• /
• pp.1-8
• /
• 1997

In order to reject the steady-state tracking error, it is common to introduce integral compensators in servosystems for constant reference signals. However, if the mathematical model of the plant is exact and no disturbance input exists, the integral compensation is not necessary. From this point of view, a two-degree-of-freedom(2DOF) servosystem has been proposed, in which the integral compensation is effective only when there is a modeling error or a disturbance input. The present paper considers robust stability of this 2DOF servosystem incorporating an observer to the structured and unstructured uncertainties of the controlled plant. A robust stability condition is obtained using Riccati inequality, which is written in a linear matrix inequality (LMI) and independent of the gain of the integral compensator. This result impies that if the plant uncertainty is in the allowable set defined by the LMI condition, a high-gain integral compensation can be carried preserving robust stability to accelerate the tracking response.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.1
• /
• pp.58-64
• /
• 2007

In this paper, the stabilization problem of the image stabilization system(ISS) that captures the image of an object on the ground by remote sensing is considered. The ISS should be stable under outer disturbance such as helicopter vibration for tracking line of sight. Although PID controllers are optimized for the system, disturbances cause the instability of the system. To minimize the effect of the disturbance, the time-delayed control method is used to compensate for uncertainties. Simulation studies are performed and experiments are conducted to confirm the simulation results. Performances of PID control and time-delayed control methods are compared.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1759-1760
• /
• 2008

This paper proposes a neural network(NN)-based adaptive sliding mode controller for discrete-time nonlinear systems. By using disturbance estimation technique, a sliding mode controller is designed, which forces the sliding variable to be zero. Then, NN compensator with hidden-layer-to-output-layer weight update rule is combined with sliding mode controller in order to reduce the error of the estimates of both disturbances and nonlinear functions. The whole closed loop system rejects disturbances excellently and is proved to be ultimately uniformly bounded(UUB) provided that certain conditions for design parameters are satisfied.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.5 no.1
• /
• pp.1-5
• /
• 2008

Pneumatic driving systems have hard non-linear characteristic and large friction force compared with driving power. Hence, it cannot be robust against parameter uncertainties, modelling error, disturbance and noise. In this study, we apply a mixed $H_2/H_{\infty}$ control to the generalized plant for a pneumatic driving apparatus system including parameter uncertainty and disturbance. In order to design the $H_2/H_{\infty}$ controller, we use the LMI technique. To evaluate control performance and robust stability of the designed controller, we compare it with a conventional controller such as PVA(Position-Velocity-Acceleration state controller) using the simulation results. As a result, it can be known that designed controller shows better robust stability than the conventional controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.476-476
• /
• 2000

This paper deals with an estimation method far sideslip angle by using an unknown input observation technique in 4WS passenger car systems. Firstly, a 4WS vehicle model with 3DOP is derived under the constant velocity and same tyre's properties. The induced model is transformed into the linear state space model with considering the external disturbance. Secondly, an unknown input observer is introduced and its property which estimating the states of system without any disturbance information is shown. Lastly, the estimated sideslip angle of the 4WS system is verified through numerical simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.130-130
• /
• 2000

This paper presents a robust fault diagnosis and fault tolerant control lot the actuator and sensor faults in the closed-loop systems affected by unknown inputs or disturbances. The fault diagnostic scheme is based on the residual set generation by using robust Parity space approach. Residual set is evaluated through the threshold test and then fault is isolated according to the decision logic table. Once the fault diagnosis module indicates which actuator or sensor is faulty, the fault magnitude is estimated by using the disturbance-decoupled optimal state estimation and a new additive control law is added to the nominal one to override the fault effect on the system. Simulation results show that the method has definite fault diagnosis and fault tolerant control ability against actuator and sensor faults.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.4
• /
• pp.351-361
• /
• 2001

In this paper, a generalized framework called as robust internal-loop compensator(RIC) is presented, and by using this, a structural design method of sliding of sliding mode controller is proposed. First, a general sliding mode controller is derived and a stabilizing control input is designed based on Lyapunov redesign for the system in the presence of uncertainty and disturbance. And adopting the internal model following control, RIC is proposed. Next, using the structural characteristics of the proposed RIC, disturbance attenuation characteristics are analyzed and the performance of the closed-loop system is predicted. Through this analysis, it is shown that if the control gain of RIC is increased by N times, the magnitude of error is reduced to its 1/N. the proposed method is verified through experiments using a high-precision positioning system and the performance is evaluated.

• Journal of Institute of Control, Robotics and Systems
• /
• v.1 no.1
• /
• pp.25-32
• /
• 1995

Nonlinear depth control algorithms for the hovering system of underwater vehicles are presented. In this paper, a nonlinear effect in heave motion for underwater vehicles, a deadzone effect of the flow control valve in the hovering tank and an impact disturbance are considered. In this situation, in order to choose a desirable controller, sliding mode controller and fuzzy sliding mode controller are designed and compared. The computer simulation results show that the fuzzy sliding mode control system is more suitable in order to maintain a desirable depth of an underwater vehicle with a deadzone and impact disturbance.