• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.6
• /
• pp.389-396
• /
• 2016

The sealing robot must be able to calculate the slope of a contact surface for complete adherence of the sealing on different concrete shapes. After the slope is obtained, the robot will track on the surface of the concrete, but this process contains an error in the actual purpose of the force command. The reason this a phenomenon occurs, the non-linearity of the contact surface and the end-effector, is due to parasitic coupling. Errors like make it difficult to measure accurately the respective factors. Therefore, it is regarded as a disturbance that occurs when it follows the work surface it. In this paper, we selected the friction coefficient of the surface as a control factor and designed a compensator to reduce effects of disturbance. Finally, in view of the non-linearity of the end-effector of a robot to contact surfaces directly, we propose a robust force tracking controller in the finite range for managing disturbances that occur during the sealing.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.692-695
• /
• 1997

Nonlinear robust attitude controller for 3-axis stabilized spacecraft is designed. Robust stability analysis for nonlinear spacecraft system with disturbance is conducted. External disturbances and parametric uncertainties decrease Spacecraft's attitude pointing accuracy. Sliding Mode Control(SMC) provides stability of system in the face of these disturbances and uncertainties. The concept of quadratic boundedness and quadratic stability are applied to the robust analysis for the nonlinear spacecraft system subject to bounded disturbance torques. Numerical simulation is conducted to compare the analysis result and actual nonlinear simulation. The simulation show that analysis result is valid.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1326-1329
• /
• 1997

In designing the controller by changing the weighting matrix for the pirpose of satisfying constraints, the physical meaning of weighting matrix may disapperar and the system may not yield best performance because operation condition such as periodic disturbance was not considered. In this paper, the weighting matrix is fixed and controller is designed to minimize the new performance index to reduce the effects of periodic-type disturbances. This method is applied to design the satellite controller to verify the effetiveness.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.160-163
• /
• 1996

This paper deals with MCMBPC(Multivariable Constrained Model Based Predictive Controller) for nonlinear boiler system with noise and disturbance. MCMBPC is designed by linear state space model obtained from some operating point of nonlinear boiler system and Kalman filter is used to estimate the state with noise and disturbance. The solution of optimization of the cost function constrained on input and/or output variables is achieved using quadratic programming, viz. singular value decomposition (SVD). The controller designed is shown to have excellent tracking performance via simulation applied to nonlinear dynamic drum boiler turbine model for 16OMW unit.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1115-1119
• /
• 1996

The objective of this paper is to study on the idle speed control sing the fuzzy logic controller under load disturbance. The inputs of the fuzzy controller are error of rpm and rpm variation. The output of fuzzy controller is an ISC motor step. The airflow is controlled by the ISC motor movement and the idle speed is controlled by the airflow control. During the control, air to fuel ratio was checked by LAMBDA sensor. All experiments were carried in real vehicle.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.151.2-151
• /
• 2001

In this paper, the design of a two-degree-of-freedom(TDF) controller is proposed to track the reference model, as well as to reject an influence of measurable disturbance for descrpitor system. The TDF controllers based on the Youla parametrization reveals that the design of the feedforward controller and the regulator can be done independently. First, to solve this problem, we will change descriptor system into regular state space system using a state feedback. And then, the feedforward controller is determined by solving a full information approach for augmented system with a nominal control constraint, and the regulator is designed by means of the loop-Shaping method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.62.1-62
• /
• 2002

$\textbullet$ INTRODUCTION $\textbullet$ MATHEMATICAL MODEL OF EXCAVATOR $\textbullet$ H_INF CONTROLLER BASED ON DISTURBANCE OBSERVER $\textbullet$ SIMULATION RESULTS $\textbullet$ CONCLUSION

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.90.3-90
• /
• 2002

$\textbullet$ Introduction of fuzzy logic controller for dynamic system under irregular disturbance $\textbullet$ Fuzzy rules by displacement information and the frequency characteristics of the system $\textbullet$ Modal analysis for the frequency informations of the system $\textbullet$ Introduction of mode selecting unit(MSU) based on Fast-Fourier transform(FFT) algorithm $\textbullet$ Piezo ceramic as an actuator of flexible structure

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.1075-1079
• /
• 1989

In this paper a robust control design is developed for the control of a multi-joint manipulators using sliding observer. The sliding observer is introduced to estimate the angular velocity of the links under the disturbance input. The feedback control is designed by the use of the estimated value of the angular velocity .theta.. The VSS control laws is introduced to ensure the robustness concerning the disturbance inputs. To illustrate the effectiveness of the proposed method, a computer simulation is performed for a two-joint manipulator.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.676-680
• /
• 1991

This paper proposes fuzzy control algorithms for a DC moter speed control. The proposed algorithms are constructed by the fuzzy controller and the fuzzy compensator. The fuzzy compensator used to overcome rapidly the effects caused by the disturbance and is mounted outside of the closed loop of the fuzzy controller. The fuzzy control rules are established from human operator experience and basic engineering knowledge about the process dynamics. Simulation results show that the proposed algorithms compensate for parameter variation and disturbance.