• 제목/요약/키워드: disturbance rejection controller

검색결과 180건 처리시간 0.033초

Stabilization for Multirate Sampled-data Control Systems in case of Open-loop Unstable Plant

  • Son, Seok-Bo;Kim, Young-Baek;Park, Chansik;Lee, Sang-Jeong
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2000년도 제15차 학술회의논문집
    • /
    • pp.488-488
    • /
    • 2000
  • This paper proposes a stabilizing controller for multirate sampled-data systems which have a periodic output The proposed controller has IMC structure, and can be decomposed into a ye-stabilizing controller, an output estimator, a filtered disturbance estimator and the inverse of the fast ye-stabilized plant model. We assume that the plant is open-loop unstable and the disturbance consists of a sum of finite number of sinusoids with different frequencies. A sufficient condition for maintaining observability in the multirate sampled-data system is derived and a design strategy for filtered disturbance rejection is proposed. In addition, we propose a design method (or the plant output estimator. The simulation results show that the proposed stabilizing controllers can stabilize the plant

  • PDF

Incremental Passivity Based Control for DC-DC Boost Converters under Time-Varying Disturbances via a Generalized Proportional Integral Observer

  • He, Wei;Li, Shihua;Yang, Jun;Wang, Zuo
    • Journal of Power Electronics
    • /
    • 제18권1호
    • /
    • pp.147-159
    • /
    • 2018
  • In this paper, the voltage tracking control of a conventional DC-DC boost converter affected by unknown, time-varying circuit parameter perturbations is investigated. Based on the fundamental property of incremental passivity, a passivity based control law is designed. Then, to obtain a better disturbance rejection property, two generalized proportional integral (GPI) observers are employed to estimate the time-varying uncertainties in the output voltage and inductor current channels, and the estimated values are applied as feedforward compensation. Moreover, the global trajectory tracking performance of a system with disturbances is ensured under the composite controller. Finally, simulation and experiment studies are provided to demonstrate the feasibility and effectiveness of the proposed method. The results show that the proposed controller delivers a promising disturbance rejection capability as well as a good nominal tracking performance.

가변이득 PI 제어기를 이용한 BLDC 모터의 속도제어 (Speed Control of Permanent Magnet Brushless DC Motor using Variable Gain PI Controller)

  • 윤시영;이주
    • 전기학회논문지
    • /
    • 제62권9호
    • /
    • pp.1234-1239
    • /
    • 2013
  • This paper provides a technical review of speed control using variable gain PI algorithm for BLDC(Brushless DC) motor. Usually the PI control is used in many motor applications, but a general PI control has problems of overshooting and disturbance for response. By the change of PI gain in motor control operation, these problems can be solved. To find the optimized PI gains for BLDC motor control, many control methods have been proposed. In this paper, the control algorithm with a variable PI gain is applied to improve overshooting response in transient region and rapid load disturbance rejection. Fixed gain and variable gain PI controls are compared. The validity of the propose method is verified by experiment.

연속식 공중합 반응기의 모델링 및 제어기 설계 (Modeling and controller design for a continuous copolymerization reactor)

  • 황우현;이현구
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
    • /
    • pp.788-791
    • /
    • 1996
  • A mathematical model is developed for thermal solution copolymerization of styrene and acrylonitrile in a continuous stirred tank reactor(CSTR). Computational studies are carried out with the continuous copolymerization system model developed in this work to give the monomer conversion, copolymer composition and the average molecular weights of the copolymer. By performing the dynamic analysis of the reaction system, the polymer properties against the changes in the operating conditions are determined quantitatively. The cascade PID and fuzzy controller show satisfactory performances for both set point tracking and disturbance rejection. Especially, the fuzzy controller is superior to the PID controller.

  • PDF

목표치 필터형 2자유도 PID 제어기를 이용한 공기식 제어밸브의 제어 특성 연구 (A Study on the Characteristic of Control Valve using 2DOF PID Controller with Target Value Filter)

  • 유경렬;김동화
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 B
    • /
    • pp.809-811
    • /
    • 1999
  • The three-mode PID controller is widely used in plant because control algorithm is simple and tuning method is general. But the conventional PID controller can not have the both purpose of setpoint tracking and disturbance rejection at the same time. In this paper, we studied the application 2DOF PID controller to pneumatic control valve through simulation and experiments. Results are Presented a satisfactory response

  • PDF

H$\infty$ Fuzzy Dynamic Output Feedback Controller Design with Pole Placement Constraints

  • Kim, Jongcheol;Sangchul Won
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2001년도 ICCAS
    • /
    • pp.176.5-176
    • /
    • 2001
  • This paper presents a fuzzy dynamic output feedback controller design method for Parallel Distributed Compensation (PDC)-type Takagi-Sugeno (T-S) model based fuzzy dynamic system with H$\infty$ performance and additional constraints on the closed pole placement. Design condition for these controller is obtained in terms of the linear matrix inequalities (LMIs). The proposed fuzzy controller satisfies the disturbance rejection performance and the desired transient response. The design method is verified by this method for an inverted pendulum with a cart using the proposed method.

  • PDF

강인 내부 보상기를 이용한 새로운 강인 제어기 설계 (A Novel Robust Controller Design using Robust Internal-loop Compensator)

  • 최현택;서일홍
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제48권8호
    • /
    • pp.987-995
    • /
    • 1999
  • A new robust controller design methodology for single-input single-output systems is proposed, where the proposed controller consists of a conventional or optimal servo controller at the outer loop as well as the robust internal-loop compensator(RIC) to eliminate the model uncertainty and external disturbance. It is shown that RIC with finite gain can make actual systems be nominal models within a prespecified error bound. And, it is also shown that RIC-based system is robustly stable regardless of input saturation. Several numerical examples are illustrated to show validities of the proposed robust controller.

  • PDF

Design of Active Disturbance Rejection Control for Inductive Power Transfer Systems

  • Wang, Yanan;Dong, Lei;Liao, Xiaozhong;Ju, Xinglong;Xiao, Furong
    • Journal of Power Electronics
    • /
    • 제18권5호
    • /
    • pp.1434-1447
    • /
    • 2018
  • The control design of inductive power transfer (IPT) systems has attracted a lot of attention in the field of wireless power transmission. Due to the high-order resonant networks and multiple loads in IPT systems, a simplified model of an IPT system is preferred for analysis and control design, and a controller with strong robustness is required. Hence, an active disturbance rejection control (ADRC) for IPT systems is proposed in this paper. To realize the employment of ADRC, firstly a small-signal model of an LC series-compensative IPT system is derived based on generalized state-space averaging (GSSA), then the ADRC is implemented in the designed IPT system. The ADRC not only provides superior robustness to unknown internal and external disturbances, but also requires few knowledge of the IPT system. Due to the convenient realization of ADRC, the designed IPT system retains its simple structure without any additional circuits. Finally, a frequency domain analysis and experimental results have validated the effectiveness of the employed ADRC, especially its robustness in the presence of frequency drifts and other common disturbances.

외란 관측기를 이용한 BLDC 전동기의 속도제어 (Speed Control of the BLDC Motor using the Disturbance Observer)

  • 전용호
    • 한국전자통신학회논문지
    • /
    • 제11권10호
    • /
    • pp.955-962
    • /
    • 2016
  • 본 논문은 BLDC 전동기의 정밀한 속도제어를 위하여 외란 관측기의 설계 및 영향을 제거하는 제어기 설계방법을 제안한다. BLDC 전동기의 외부에서 회전축에 작용하는 부하의 변동과 전기적인 시스템에서 발생하는 역기전력을 외란으로 가정하고, 외란은 구간에 대한 상수로 가정하여 루엔버거 관측기를 설계한다. 시스템 상태에 대한 관측기의 오차가 0으로 수렴할 수 있도록 적절한 이득을 설정하는 방법을 보이고, 추종성능을 향상시킬 수 있는 적절한 PI제어기의 이득을 설정하기 위한 방법을 제시한다. 제안된 제어기를 120W급의 BLDC 전동기에 적용하여 속도 그리고 전류 레퍼런스를 추종하는 능력을 시뮬레이션 시험하였다. 상수부하의 변동을 외란으로 적용하였고, 그 결과 설계된 제어기의 정상상태 오차가 0.1 [%] 이내를 가짐으로 상태 추종성능에 대해 유용한 제어기임을 보일 수 있었다.

심한 비선형성을 갖는 시스템의 시간지연 출력궤환을 이용한 추종제어기의 설계 (Tracking Controller Design Using Delayed Output Feedback For Systems With Stiff Nonlinearities)

  • 나승유
    • 한국통신학회논문지
    • /
    • 제16권4호
    • /
    • pp.342-349
    • /
    • 1991
  • 본 논문에서는 동작점에서 근사적인 선형화를 할수 없는 심한 비선형성을 갖는 시스템에 대하여 추종 및 외란제거 제어기의 설계방법을 제안한다. 제어기 합성에는 관측가능한 양만이 사용된다. 추종성과 외란의 제거가 가능하도록 시스템의 출력단에 보상기를 추가하여 비선형성을 제외한 전체 시스템에 시간지연 출력궤환제어를 사용하며, 기술함수방법을 사용하여 출력이 정격내의 값이 되도록 궤환매개변수를 선택하여 비선형성의 난점을 극복한다.

  • PDF