• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.450-455
• /
• 1989

In this paper we investigate the application to the motion control of n-link robotic manipulators of recently developed stable factorization approach to tracking and disturbance rejection. Given control scheme consists of an approximate "Computed Torque" based upon a simplified model together with additional state feedback and feedforward compensation, and then, nonlinear control gain has more useful than constant control gain to guarantee robustness to parameter uncertainty and external disturbance. At this stage, we design high gain nonlinear state feedback controller and simulate this controller at the SCARA type robot manipulator of two joint.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.515-517
• /
• 1999

This paper considers the design of the effective controllers for the plant with an integrator and a long deadtime. The structure of the new DTC(DeadTime Compensator) that has an additive filter is proposed. Our DTC shows the improved performance in set-point response and disturbance rejection. Especially the bad effect of the long deadtime in the disturbance rejection is fairly reduced by using the additive filter. Illustrative examples are provided to show the availability of the proposed controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.362-366
• /
• 1986

Using simple linear prediction algorithm a design procedure of robust PI and PID controllers for SISO system, usually called 'PID predictor controllers, is developed. The design procedure is able to properly adjust gain margin and phase margin and control coefficients are selected in frequency domain. The performance of the PID predictor controller is superior to that of the normal PID controller in terms of robustness in design and disturbance rejection.

• 한국정밀공학회지
• /
• 제12권10호
• /
• pp.157-165
• /
• 1995

The new formulation of designing the two degree of freedom(TDF) robust controller is proposed using $H_{\infty}$optimization and model matching method. In this formulation the feedback controller and feedforward controller are designed in a single step using $H_{\infty}$optimization procedure. Roughly speaking, the feedback controller is designed to meet robust stability and disturbance rejection specifications, while the feedforward controller is used to improve the robust model matching properties of the closed loop system. The proposed formulation will be illustrated and evaluated on a seeker scan-loop. And the performances of TDF robust controller are compared with those of the $H_{\infty}$ controller designed using Loop Shaping Design Procedure proposed by McFarlane and Glover.lover.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.956-959
• /
• 1996

In this study, we propose a neuro-genetic controller combined with a linear controller in parallel to improve the tracking performance of the Line of Sight(LOS) stabilization system and reject the effect of disturbances. A Genetic Algorithm(GA) is used to optimize weights of the neuro-genetic controller since this algorithm can search a global minimum without derivatives or other auxiliary knowledge. The LOS system is very complex and has limited measurable output data. Under these specific circumstances GA solves many problems that other training methods have. Computer simulation results show that the, proposed controller makes better tracking response and rejection of disturbance than a linear controller.

• 제어로봇시스템학회논문지
• /
• 제22권5호
• /
• pp.320-325
• /
• 2016

This paper presents a robust finite-time sliding mode control (SMC) scheme for unknown disturbance and unmodeled nonlinear friction and dynamics in the robotic manipulator. A finite-time SMC (FSMC) surface and finite-time sliding mode controller are constructed to obtain faster error convergence than the conventional infinite-time based SMC. By adding prescribed constraint control term to a finite-time SMC to compensate for unknown disturbance and uncertainties, a robust control scheme can be designed as well as faster convergence control. In addition, simpler controller structure is built by using feed-forwarding upper bound coefficients of each manipulator dynamic parameters instead of model-based control or adaptive observer to estimate unknown manipulator parameters. Simulation and experimental evaluations highlight the efficacy of the proposed control scheme for an articulated robotic manipulator.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.609-612
• /
• 2008

The solid immersion lens (SIL) based near-field recording (NFR) system is considered as one of the high density optical data storage system. For the NFR servo system, tracking servo control is a difficult technology to maintain extremely small gap between SIL and media within one twentieth. This is because the track pitch is decreased for increasing the recording density. In this paper, we propose disturbance observer (DOB) and internal model principle (IMP) for disturbance rejection due to eccentricity of disk. The performance of tracking controller using DOB is increased by about 85%, 94%, 97% using Q filters that have bandwidths of 50Hz, 125Hz, 250Hz, respectively. Moreover, IMP based controller is effectively reduced the residual error.

• Journal of Power Electronics
• /
• 제14권3호
• /
• pp.549-563
• /
• 2014

In this paper, the speed regulation problem of permanent synchronous motor (PMSM) systems under the vector control framework is studied. A model reference adaptive controller (MRAC) based on the Lyapunov stability theory is first designed. Since the standard MRAC method provides poor disturbance rejection performance in the case of strong disturbances, a composite control method which combines the MRAC method and the disturbance estimation method, called the MRAC+ESO method, is proposed. An extended state observer (ESO) is introduced to estimate the lumped disturbances. The obtained estimated value acts as a feedforward compensation term to the MRAC controller. A stability analysis of the composite control method is given. Simulation and experimental results are presented and compared to show the effectiveness of the proposed control method.

• 제어로봇시스템학회논문지
• /
• 제5권3호
• /
• pp.363-369
• /
• 1999

In this paper, we design the robust $H_{\infty}$ controller for water level control of steam generator using a mixed $H_{\infty}$ optimization with model-matching method. Firstly we choose the desired model which has good disturbance rejection performance. Secondly we design a stabilizing controller to keep the model-matching error small and also provide sufficiently large stability margin against additive perturbations of the nominal plant. Simulation results show that proposed robust $H_{\infty}$ controller at specific power operation has satisfactory performances against the variations of load power, steam flow rate, primary circuit coolant temperature, and feedwater temperature. It can be also observed that the proposed robust $H_{\infty}$ controller exhibits better robust stability than conventional PI controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.421-421
• /
• 2000

In this paper, robust two-degree-of-freedom controller for satellite antenna system which tracks reference signal is designed. Two-degree-of-freedom controller consists of a prefilter and a feedback controller to solve trade-off between robust stability and command response. The feedback controller is designed from specifications like stability, disturbance rejection and robustness via H$_{\infty}$ design technique. In the sequel, H$_2$ optimal prefilter is introduced to improve the command response. This suggests a two-step design, with different types of performance specifications at each stage. In practical problems, this may easily lead to a prefilter of unacceptably high order. In order to avoid high order prefilter we use a particular structure in which both the prefilter and the feedback controller share the same dynamics. H$_2$-prefilter technique proposed in this paper is verified by simulation.