• 한국태양에너지학회 논문집
• /
• 제32권2호
• /
• pp.64-73
• /
• 2012

The angle of solar panels is calculated using solar radiation model for the efficient solar power generation. In ideal state, the time of maximum solar radiation is represented from 12:08 to 12:40 during a year at Gangneung and it save rage time is12:23. The maximum solar radiation is 1012$W/m^2$ and 708$W/m^2$ inc lear sky and cloudy sky, respectively. Solar radiation is more sensitive to North-South (N-S) slope angle than East-West (E-W) azimuth angle. Daily solar radiation on optimum angle of solar panel is higher than that on horizontal surface except for 90 days during summer. In order to apply to the real atmosphere, the TMY (typical meteorological Year) data which obtained from the 22 solar sites operated by KMA(Korea Meteorological Administration) during 11 years(2000 to 2010) is used as the input data of solar radiation model. The distribution of calculated solar radiation is similar to the observation, except in Andong, where it is overestimated, and in Mokpo and Heuksando, where it is underestimated. Statistical analysis is performed on calculated and observed monthly solar radiation on horizontal surface, and the calculation is overestimated from the observation. Correlationis 0.95 and RMSE (Root Mean Square Error) is10.81 MJ. The result shows that optimum N-S slope angles of solar panel are about $2^{\circ}$ lower than station latitude, but E-W slope angles are lower than ${\pm}1^{\circ}$. There are three types of solar panels: horizontal, fixed with optimum slope angle, and panels with tracker system. The energy efficiencies are on average 20% higher on fixed solar panel and 60% higher on tracker solar panel than compared to the horizontal solar panel, respectively.

• 천문학회지
• /
• 제46권6호
• /
• pp.203-224
• /
• 2013

Wide-field $JHK_s$ images obtained with the SIRIUS near-infrared camera of the IRSF 1.4m telescope are used to examine the tidal structures of the spatial stellar configuration around six metal-poor ([Fe/H]< -1.0) globular clusters located within 3 kpc from the Galactic center. The radial surface density profiles are obtained from the surface photometry of the cluster images and the star counting for the photometric data. For the star counting, candidates of cluster member stars are selected with an filtering algorithm in color-magnitude diagrams. We find that the six target clusters show tidal overdensity features in the radial surface density profiles. There is a break inside the tidal radius for each cluster, and the profile in the outer overdensity region is characterized by a power law. Two-dimensional density maps of all the clusters show distorted asymmetric stellar configurations in the outer region. In five out of the six target clusters, the overdensity features are likely to be associated with the effects of the Galaxy dynamical interaction and the cluster space motions. The observed tidal configurations of stars suggest that several metal-poor clusters in the Galactic bulge are possibly surviving remnants of mergers to build the old stellar system of the Galactic bulge.

• 천문학회보
• /
• 제41권2호
• /
• pp.32.3-32.3
• /
• 2016

Available VLBI sources at high frequencies (e.g. >22GHz) are very limited - mainly due to atmospheric fluctuations that degrade coherence time and a power-law energy distribution of particles in case of AGNs. However, simultaneous multi-frequency VLBI receiving system of the Korean VLBI Network (KVN) and its powerful VLBI phase calibration technique offer benefits in finding more weak sources at millimeter wavelengths. Based on this aspect, multi-frequency AGN survey with the KVN (MASK) project, which aims to densify an existing a VLBI catalog of extragalactic radio sources at 22/43/86/129GHz is proposed as a KVN legacy program. We selected 1220 sources of AGNs that include known VLBI sources and new fringe-detected sources using the KVN at K-band (22GHz). Among them, 138 sources were observed as pilot experiments at 22/43/86/129GHz simultaneously and excellent VLBI detection results are achieved. Therefore, we expect that MASK will open a new era in VLBI science at millimeter wavelengths by providing unprecedented number of available sources in the Universe.

• International Journal of Control, Automation, and Systems
• /
• 제1권2호
• /
• pp.194-202
• /
• 2003

In this paper, we introduce a category of Multi-FNN (Fuzzy-Neural Networks) models, analyze the underlying architectures and propose a comprehensive identification framework. The proposed Multi-FNNs dwell on a concept of fuzzy rule-based FNNs based on HCM clustering and evolutionary fuzzy granulation, and exploit linear inference being treated as a generic inference mechanism. By this nature, this FNN model is geared toward capturing relationships between information granules known as fuzzy sets. The form of the information granules themselves (in particular their distribution and a type of membership function) becomes an important design feature of the FNN model contributing to its structural as well as parametric optimization. The identification environment uses clustering techniques (Hard C - Means, HCM) and exploits genetic optimization as a vehicle of global optimization. The global optimization is augmented by more refined gradient-based learning mechanisms such as standard back-propagation. The HCM algorithm, whose role is to carry out preprocessing of the process data for system modeling, is utilized to determine the structure of Multi-FNNs. The detailed parameters of the Multi-FNN (such as apexes of membership functions, learning rates and momentum coefficients) are adjusted using genetic algorithms. An aggregate performance index with a weighting factor is proposed in order to achieve a sound balance between approximation and generalization (predictive) abilities of the model. To evaluate the performance of the proposed model, two numeric data sets are experimented with. One is the numerical data coming from a description of a certain nonlinear function and the other is NOx emission process data from a gas turbine power plant.

• 한국환경보건학회지
• /
• 제17권1호
• /
• pp.57-66
• /
• 1991

This study was carried out for 5 years between 1984 and 1986 and 1989 and 1990. This interviewers visited 292 households to evaluate the perception of the residents using .the. Simple Piped Water Supply (SPWS), and examined the pollution source surrounding 42 SPWS facilities and water quality by the chemical and microbiological method. The purpose of this study was to find out problems linked with SPWS and to investigate more efficient way of improvement in rural water supply. The results of the study are surmnarized as follows: 1) Approximately 55% of the sampled population have been served by simple piped water supply. 2) The drinking water was mostly taken from the springs in 16 sites and valley water in 26 sites. 3) Considering the type of distribution of the SPWS, there are 28 natural gravity systems and 14 pumping systems. 4) Out of the 180 SPWS in Chun Sung Area, 74% of the SPWS facilities were used more than ten years. In addition, 40% of residents expressed the need for repairs of old facilities. 5) 48% of the SPWS facilities are neighbored with pollution source. 6) 50% of the maintenance crews were not committed totheir job but instead, the facilities were operated by some residents or community leaders who were personally concerned about quality of the facilities. 7) About 85% of the residents answered that SPWS was convenient and helpful. 8) About 57% of the residents complaind that the amount of daily water supply is not adequate. 9) About 74% of the residents felt that the water quality is high for dringking water and therefore, 52% of the facilities were not properly chlorinated. But in contrast, the biochemical tests indicated that only 28% of the SPWS met the dringking water quality standards. 10) Maintenance cost per a household ranges form 500 to 2, 000Won (1 $ = 700 Won) a month. Most of the cost was to cover the power electric charge. For the effective maintenance and arrangement of the facilities, gorvermental financial support for the maintenance is strongly recommended.

• 대한토목학회논문집
• /
• 제10권2호
• /
• pp.79-90
• /
• 1990

국립 건설 시험소에서 1980년 부터 1989년에 이르기가지 10년 동안 전국에 걸쳐 동결(凍結)된 지반의 깊이를 조사하였다. 그 위치는 무작위(無作爲)로 선정하였으나 동결이 심한 지반에 대해 조사하도록 노력하였다. 조사지점의 동결토(凍結土)를 채취하여 미 공병단의 동결토(凍結土) 분류방법(分類方法)에 따라 분류하였다. 동결 깊이 조사자료를 근거로 하여 전국(全國) 최대(最大) 동결(凍結)깊이 선도(線圖)가 작성되었다. 한편, 기상자료를 이용하여 포장설계에 이용할 수 있도록 설계 동결지수선도를 작성하고, 1980년에 도로조사단에서 작성한 자료(資料)와 비교 분석하였다. 동결깊이는 공기동결지수의 3승근(乘根)에 비례하는 새로운 경험식을 제안(提案)하고 다른 경험식과 비교하였다.

• Steel and Composite Structures
• /
• 제35권1호
• /
• pp.61-76
• /
• 2020

In this paper, the dynamic behaviour of an inclined functionally graded material (FGM) beam with different boundary conditions under a moving mass is investigated based on the first-order shear deformation theory (FSDT). The material properties vary continuously along the beam thickness based on the power-law distribution. The system of motion equations is derived by using Hamilton's principle. The finite element method (FEM) is adopted to develop a general solution procedure. The moving mass is considered on the top surface of the beam instead of supposing it on the mid-plane. In order to consider the Coriolis, centrifugal accelerations and the friction force, the contact force method is used. Moreover, the effects of boundary conditions, the moving mass velocity and various material distributions are studied. For verification of the present results, a comparative fundamental frequency analysis of an FGM beam is conducted and the dynamic transverse displacements of the homogeneous and FGM beams traversed by a moving mass are compared with those in the existing literature. There is a good accord in all compared cases. In this study for the first time in dynamic analysis of the inclined FGM beams, the Coriolis and centrifugal accelerations of the moving mass are taken into account, and it is observed that these accelerations can be ignored for the low-speeds of the moving mass. The new provided results for dynamics of the inclined FGM beams traversed by a moving mass can be significant for the scientific and engineering community in the area of FGM structures.

• 한국전자파학회논문지
• /
• 제22권7호
• /
• pp.720-728
• /
• 2011

본 논문에서는 레이더 표적의 피아 식별을 위해 일반적으로 사용되는 모노펄스 보조 감시 레이더용 안테나의 개발 방안 및 결과를 제시하였다. 개발된 안테나는 수동 선형 배열 안테나로서 횡급전기와 다수의 배열 소자로 구성된다. 횡급전기는 포트별로 전력 및 위상비가 최적화된 합, 차 및 부엽 억제 채널을 제공하며, 19개의 배열 소자와 1개의 후방 배열 소자와 연결되어 방위각 방향으로 빔 패턴을 형성한다. 합 채널 빔 패턴의 방위각 최대 부엽 수준은 -20 dBc 이하이며, 부엽 억제 채널 빔 패턴은 합 채널 빔 패턴의 주 빔 이외의 전 영역에서 부엽을 덮도록 한다. 그리고 차 채널 빔 패턴은 방위각 방향의 탐지 정확도를 높이기 위한 모노펄스 기능에 사용된다. 한편, 배열 소자는 고각 방향으로 성형 빔(shaped-beam)을 형성하여 지면으로부터의 강한 클러터 영향 및 다중경로 효과를 억제할 수 있도록 하였다. 개발된 안테나는 산란계수 측정 및 원전계 빔 패턴 시험을 통해 주어진 개발 규격을 모두 잘 만족하는 것을 확인하였다.

• 대기
• /
• 제23권3호
• /
• pp.265-273
• /
• 2013

To investigate properties of cloud and rainfall occurred at Boseong on 10 July 2012, Raindrop Size distributions (RSDs) and other parameters were analyzed using observation data collected by Micro Rain Radar (MRR) and PARticle SIze and VELocity (PARSIVEL) disdrometer located in the National center for intensive observation of severe weather at Boseong in the southwest of the Korean peninsula. In addition, time series of RSD parameters, relationship between reflectivity-rain rate, and vertical variation of rain rates-fall velocities below melting layer were examined. As a result, good agreements were found in the reflectivity-rain rate time series as well as their power relationships between MRR and PARSIVEL disdrometer. The rain rate was proportional to reflectivity, mean diameter, and inversely proportional to shape (${\mu}$), slope (${\Lambda}$), intercept ($N_0$) parameter of RSD. In comparison of the RSD, as rain rate was increased, the slope of RSD became less steep and the mean diameter became larger. Also, it was verified that reflectivities are classified in three categories (Category 1: Z (reflectivity) > 40 dBZ, Category 2: 30 dBZ < Z < 40 dBZ, Category 3: Z < 30 dBZ). As reflectivity was increased, rain rate was intensified and larger raindrops were existed, while reflectivity was decreased, shape (${\mu}$), slope (${\Lambda}$), intercept ($N_0$) parameter of RSD were increased. We expected that these results will lead to better understanding of microphysical process in convective rainfall system occurred during short-term period over Korean peninsula.

• 한국항행학회논문지
• /
• 제16권2호
• /
• pp.234-239
• /
• 2012

차세대 이동통신 시스템은 다양한 서비스를 지원하기 위해 다양한 분야에서 연구되며 응용되고 있다. 차세대 이동통신 시스템 연구에 있어 최대 관심은 다양한 통신시스템의 통합과 빠른 데이터 전송을 이용한 다양한 서비스의 제공이다. 통신시스템의 통합은 Multi Standard Modem을 이용하여 연구되고 있으며, 다양한 서비스 제공을 위한 빠른 데이터 전송은 OFDM(Othogonal Frequency Division Multiplexing) 방식이 적용되고 있다. 본 논문에서는 차세대 이동통신을 위한 Multi Standard Modem을 이용하여 PAPR(Peak-to-Average Power Ratio)을 감소시키기 위한 방법을 제안하고, PAPR 감소 중 발생되는 문제점인 대역 내 왜곡을 EVM(Error Vector Magnitude)을 이용하여 보정하는 기법을 제안하였다. 본 논문에서는 제안한 방법을 이용하여 차세대 이동통신 시스템의 PAPR 감소 효율, CCDF(Complementary Cumulative Distribution Function)와 BER(Bit Error Rate) 성능을 시뮬레이션을 통해 분석했다. 시뮬레이션 결과 차세대 이동통신 시스템의 성능이 개선됨을 알 수 있다.