• Ocean Science Journal
• /
• 제42권3호
• /
• pp.153-163
• /
• 2007

This study is based on a series of numerical modeling experiments to understand the tidal circulation in the Kangjin Bay (KB). The tidal circulation in the KB is mostly controlled by the inflow from two channels, Noryang and Daebang which introduce the open ocean water into the northern part of the KB with relatively strong tidal current, while in the southern part of the KB, shallowest region of the entire study area, weak tidal current prevails. The model prediction of the sea level agrees with observed records at skill scores exceeding 90 % in terms of the four major tidal constituents (M2, S2, K1, O1). However, the skill scores for the tidal current show relatively lower values of 87, 99, 59, 23 for the semi-major axes of the constituents, respectively. The tidal ellipse parameters in the KB are such that the semi-major axes of the ellipse for M2 range from 1.7 to 38.5 cm/s and those for S2 range from 0.5 to 14.4 cm/s. The orientations of the major-axes show parallel with the local isobath. The eccentricity values at various grid points of ellipses for M2 and S2 are very low with 0.2 and 0.06 on the average, respectively illustrating that the tidal current in the KB is strongly rectilinear. The magnitude of the tidal residual current speed in the KB is on the order of a few cm/s and its distribution pattern is very complex. One of the most prominent features is found to be the counter-clockwise eddy recirculation cell at the mouth of the Daebang Channel.

• 대한기계학회논문집A
• /
• 제26권1호
• /
• pp.188-195
• /
• 2002

To investigate the degradation of mechanical properties induced mainly by neutron irradiation, the tensile tests were conducted from room temperature to 300\\`c using the irradiated and the unirradiated Zr-2.5Nb pressure tube materials. The irradiated longitudinal and transverse specimens were collected from the coolant inlet, middle, and outlet parts of M-11 tube which had been operated in Wolsung CANDU Unit-1 and exposed to different operating temperatures and irradiation fluences. The different tensile behavior was characterized not by the fluences of irradiation but by the tensile loading direction. The transverse specimen showed the higher strength and lower elongation than those of the longitudinal one. It was believed that these phenomena resulted from the microstructure anisotropy caused by the extrusion process. The increased strength hardening and decreased elongation embrittlement of the irradiated material were compard to those of the unirradiated one. While the tensile strength of the inlet was higher than that of the outlet, the elongation of the inlet was lower than that of outlet. Considering the operation condition, it was proposed that the operating temperature could be a more effective parameter than the irradiation fluence for long-time life. Through the TEM observation, it was found that while the a-type dislocation density was increased, the c-type dislocation was not changed in the irradiated. The fact that the higher dislocation density was sequentially distributed over the inlet, the middle, and the outlet parts was consistent with the distribution of the tensile strength.

• Journal of Welding and Joining
• /
• 제28권5호
• /
• pp.51-57
• /
• 2010

Brittle microstructure created in a heat affected zone (HAZ) during the welding of low alloy steel can be eliminated by post-weld heat treatment (PWHT). If the PWHT is not possible during a repair welding, the controlled bead depositions of multi-pass welding should be applied to obtain tempering effect on the HAZ without PWHT. In order to anticipate and control the tempering effect during the temper bead welding, the definition of temperature curve obtained from the analytical solution was suggested in this research. Because the analytical solution for heat flow is expressed as a mathematical equation of weld parameters, it may be effective in anticipating the effect of each weld parameter on the tempering in HAZ during the successive bead depositions. The reheating effect by the successive bead layer on the brittle coarse grained HAZ formed by earlier bead deposition was estimated by comparing the overlapped distance between the temperature curves in the HAZ. Three layered weld specimens of SA508 base metal with A52 filler were prepared by controlling heat input ratio between layers. The tempering effect anticipated by using the overlapped distance between the temperature curves was verified by measuring the micro-hardness distribution in the HAZ of prepared specimens. The temperature curve obtained from analytical solution was expected as a good tool to find optimal temper bead welding conditions.

• Journal of Welding and Joining
• /
• 제31권1호
• /
• pp.65-70
• /
• 2013

Finite element analysis and welding experiments were performed to evaluate deformation aspect for Flux Cored Arc Welding(FCAW) and Electro Gas Welding(EGW). Numerical researches of FCAW and EGW were performed considering the difference of number of welding pass and welding direction to arc flow. To perform the numerical study of FCAW and EGW, number of welding pass and welding direction to arc flow were considered in the finite element model. FCAW process requires multi pass and its welding direction is vertical to welding torch. On the other hand, EGW process requires single pass and its welding direction is parallel to welding torch. The difference of welding direction and heat input was considered in the finite element analysis. In FCAW process, Goldak's double ellipsoidal heat input model was adopted. In the EGW process, Hemi-spherical power density distribution was adopted. In the results of experiment and finite element analysis, angular deformation of FCAW process is larger than that of EGW process.

• 한국측량학회지
• /
• 제19권4호
• /
• pp.405-414
• /
• 2001

판 구조는 현대 지구물리학에 있어서 중요한 역할을 담당하고 있다. 우리나라의 지리적 메커니즘을 고려할때 판거동에 의한 지진 발생 가능성을 갖고 있으며, 지진에 의한 피해가 날로 증가하고 있는 실정이므로 이에 대한 인식의 중요성이 강조되고 있다. 이에 본 연구에서는 GPS 데이터를 이용하여 우리나라 주변국 및 국내의 지각변동 매개변수를 결정하고자 주변국에 설치되어 있는 여섯 개의 GPS 상시관측소와 국내에 설치된 11개의 GPS 상시관측소로부터 수신한 데이터를 정밀 처리소프트웨어인 GIPSY-OASIS II를 이용하여 처리하였다. 그 결과 주변국의 최대전단변형률의 평균값 ${\gamma}_max$는 $0.04{\mu}/yr$로 나타났으며, 최대 압축변화율(E$_2$)의 평균 방위각은 $97.75^{\circ}$로 나타났다. 국내의 지각변동 매개변수중 최대전단변형률의 평균값 ${\gamma}_max$는 $0.17{\mu}/yr$로 나타났으며, 최대 압축변화율$(E_2)$의 평균 방위각은 $70.25^{\circ}$ 보이고 있었으며, 지진의 발생 빈도와 비교해 볼 때 매우 비슷한 경향을 나타내고 있었다.

• 방사성폐기물학회지
• /
• 제10권4호
• /
• pp.263-272
• /
• 2012

파이로처리 방사성 폐기물 처분 시스템에 대하여 골드심을 이용하여 개발된 확률론적 평가 프로그램을 이용하여 폐쇄후 방사선적 안전성 평가를 수행하였다. 처분장으로부터 핵종이 유출되어 다양한 처분 시스템 내 매질을 이동하는 것에 관련된 정상 시나리오에 대한 평가를 위하여, 평가 결과에 대한 민감도나 일반적으로 불확실성의 범위가 큰 입력자료 중 주요하다고 판단되는 파라미터를 9개로 선정하여 평가에 고려된 핵종 중 Tc, Sn, Pa, Cs 4개의 원소에 대하여 평가 결과를 논의해 보았다. 확률론적 안전성 평가와 함께 이들 각 입력 자료에 대한 최종 방사선 피폭선량에 대한 민감도도 분석하여 결과에 대한 각 입력 파라미터의 중요도도 비교하였다.

• 한국강구조학회 논문집
• /
• 제14권4호
• /
• pp.481-487
• /
• 2002

콘크리트충전 강관기둥의 외다이아프램 접합부형식에서, 철골보의 하중이 내부의 콘크리트로 전달되는 하중전달 메카니즘이 아직 명확하게 규명되지 않았다. 여기서 각 층에서 철골보의 전단력은 외부의 강관과 내부의 콘크리트 사이의 부착응력에 의해 전달된다고 본다. 따라서 본 연구는 콘크리트충전 강관기둥의 부착응력을 파악하기 위해, 콘크리트면에만 하중을 가하는 단순가력실험을 실시하였다. 콘크리트 종류, 강관의 형상/길이, 이음부의 유무/뒷댐재의 두께 등을 변수로 총 30개의 실험체를 제작하여 실험을 실시했으며, 각 변수에 따른 실험결과를 비교/분석하고자 했다.

• 한국강구조학회 논문집
• /
• 제19권3호
• /
• pp.291-301
• /
• 2007

재료비선형 수치해석기법 중, 오버레이 모델은 같은 평면상에 여러 개의 레이어를 배치해 각 레이어의 평균한 값을 모델 전체의 값으로 사용하는 원리를 사용하는 모델로서 구성레이어의 변형률 경화계수, 단면적 및 항복응력 등을 파라메타로 설정함으로써 바우싱거 효과 및 변형률 경화현상을 표현하기에 적합한 모델지만, 응력-변형률관계의 기하학적 특징을 직접적으로 근사하기 위한 파라메타의 설정이 복잡하다는 단점이 있다. 본 논문에서는 평면응력상태를 대상으로 하며, 변형률 경화를 고려한 오버레이 모델의 정식화를 열역학을 사용하여 구체적으로 정의한다. 수치해석에 있어 전체적인 해석파라메타로서는 항복응력분포만을 고려하였으며, 항복응력분포의 설정 방법 및 그에 따른 항복응력분포함수의 p, q, r값을 정성적으로 비교분석한다. 최종적으로 탄소강과 합금강에 대한 일축, 다축응력의 실험결과와 제안한 수치해석기법의 해석결과를 비교하여 타당성을 검토한다.

• Annals of Clinical Neurophysiology
• /
• 제1권2호
• /
• pp.160-167
• /
• 1999

Although somatosensory evoked potentials(SSEPs) have been utilized as the useful diagnostic tools in evaluating the wide variety of pathological conditions, such as focal lesions affecting the somatosensory pathways, demyelinating diseases, and detecting the clinically occult abnormality, their neural generators is still considerably uncertain. To appreciate the basis for uncertainties about the origins of SSEPs, consider criteria that must be met to establish a causal relationship between activity in a neural structure and a spine/ scalp-recorded potential. Electrode locations and channel derivations for SSEPs recordings are based on two principles:(1) the waveforms are best recorded from electrode sites on the body surface closest to the presumed generator sources along the somatosensory pathways, and(2) studies of the potential-field distribution of each waveform of interest dictate the best techniques to be used. In this article, authors will describe followings focused on ;(1) the concepts of near field potentials(NFPs) and far field potentials(FFPs) - the voltage of NFPs is highly dependent upon recording electrode position, FFPs are unlike NFPs in that they are widely distributed, their latencies and amplitudes are independent of recording electrode.(2) appropriate montage settings to detect the significant potentials in the median nerve and posterior tibial nerve SSEPs(3) neural generators of various potentials(P9, N13, P14, N18, N20, P37) and their clinical significance in interpretating the results of SSEPs. Especially, Characteristics of N18(longduration, small superimposed inflection) suggested that N18 is a complex wave with multiple generators including brainstem structures and thalamic nuclei. And N18 might be used as the parameter of braindeath. Precise understanding on these facts provide an adequate basis utilizing SSEPs for numerous clinical purposes.

• 한국광물학회지
• /
• 제9권2호
• /
• pp.55-63
• /
• 1996

Epidote occurs as veinlets in the propylitic alteration zone of the Bobae clay deposit, Pusan, Korea. Its cell parameters apparently decrease with the contents of Al, Fe, and Ca. Fourier transform infrared (FTIR) spectra show one hydrosyl environment related to AlM2 at 3357-3358 cm-1. In the mid-infrared region, the peaks at 950 and 1030 cm-1 sharper with increasing Al shifting to higher energy region. The peak at 885 cm-1 shifts slightly to a lower energy region with a decreasing intensity as the Fe content increases. In the far-IR region, epidote exhibits absorption bands at 120 and 140 cm-1, which are related to the Ca-O bonds in A-sites.M ssbauer spectra of epidote show that the isomer shifts of Fe3+ range from 0.36-0.37 at the M3 site and from 0.35-0.44 at M1 site. Fe2+ shows the isomer shift ranging from 1.11 to 1.13. Quadrupole splitting is 2.04 for Fe3+M3, 0.52-0.70 for Fe3+M1, and 2.61-2.70 for Fe2+M3. Calculation shows Fe3+M386-90.7%, Fe3+M12.5-3.6%, and Fe2+M35.8-11.4% of total iron, showing preferential distribution of Fe3+ in the M3 site. The Fe3+M3 content is between 0.486 and 0.513 per formula unit. in the Fe-rich epidote, less Fe3+ and more Fe2+ are accommodated in the M1 and M3 sites. Hence, the overall disorder increases as total Fe content increase. The ordering parameter of the Bobae epidote is 0.93-0.95, suggesting a disequilibrium state below 200$^{\circ}C$. The constant temperature over a long period may be essential for the transition from disordered state to equilibrium state, despite the possible variation in flux and composition of the hydrothermal fluid.