• 품질경영학회지
• /
• 제8권2호
• /
• pp.15-22
• /
• 1980

This paper deals with the problem of determining a minimum cost sampling inspection plan for a single destructive testing by attribute. The cost for inspection lot is constructed by following three cost factors: (1) cost of inspection, (2) cost of accepted defective, (3) cost of rejected lot Using Hald's Bayesian approach in a single non-destructive testing, procedure's for finding the minimum cost single destructive sampling inspection plan by attribute are given. Assuming the uniform distribution as a prior-distribution and using numerical analysis by computer, a minimum cost single destructive sampling inspection plan by attribute for several lot sizes, unit cost, destructive testing cost, and salvage cost is given.

• 한국컴퓨터정보학회논문지
• /
• 제19권6호
• /
• pp.71-80
• /
• 2014

균등하게 분포된 많은 입력노드들을 최소비용으로 연결하는 최소신장트리 생성문제에 PTAS를 사용하면 실행시간에 있어서 효과적으로 결과를 얻을 수 있다. 그러나 비 균등 분포의 경우에는 PTAS 적용이 오히려 성능을 저하시킬 수 있다. 본 논문에서는 특정 영역에 노드들이 밀집된 경우 해당 영역에만 PTAS를 적용한 부분 PTAS를 제안한다. 이 방법은 50,000개 입력노드들의 90%가 특정 영역에 밀집된 환경에서 기존의 PTAS 방식에 비해서 생성시간은88.49%, 트리길이는 0.86%감소를 보였고, Prim의 Naive 최소신장트리 생성방법에 비해서 생성시간은 87.57% 감소, 트리길이는 1.18% 증가를 보였다. 따라서 본 연구의 제안방법은 많은 노드들이 특정영역에 밀집된 환경에서 이 노드들을 빠른 시간 내에 연결해야 하는 응용 등에 잘 적용될 수 있을 것이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.7-8
• /
• 2009

Non-contact critical current measurement apparatus was developed using hall probe which measures the magnetic field distribution across the width of superconducting tape. The hall probe consists of 7 independent hall sensors which lie in a line 600 ${\mu}m$. The difference between maximum and minimum magnetic field in the magnetic filed distribution is a main parameter to determine the critical current. As preliminary research, we calculated the magnetic field intensity at the middle sensor, which is a minimum magnetic field and generated by the circular shielding current modeled by Bean model. We confirmed that there are some parameters that affect on the minimum magnetic field; the distance between superconducting layer and hall sensor, the width of superconducting tape, and the critical current distribution across the width of superconducting tape. Among these parameters, the distance between superconducting layer and hall sensor highly influences on the minimum magnetic field.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권3호
• /
• pp.1-5
• /
• 2019

The superconductor stability theories are consistently described by the integral formula. If the defined stability function is a simple decreasing function, it becomes a cryogenic stability condition. If the stability function has a maximum value and a minimum value, and the maximum value is less than 0, then it is a cold-end recovery condition. If the maximum value is more than 0, it can be shown that the unstable equilibrium temperature, that is, the MPZ (minimum propagation zone) temperature distribution can exist. The MPZ region is divided into two regions according to the current ratio. At the low current ratio, the maximum dimensionless temperature is greater than 1, and at the relatively high current ratio, the maximum dimensionless temperature is less than 1. In order to predict the minimum quench energy, the dimensionless energy was obtained for the MPZ temperature distribution. In particular, it was shown that the dimensionless energy can be obtained even when the MPZ maximum temperature is 1 or more.

• 환경생물
• /
• 제37권4호
• /
• pp.759-768
• /
• 2019

본 연구는 한반도에서 Proto3 모형을 수행하기 위하여 필요한 3가지 기후인자 지도, 1. 식물 내한성 구역, 2. 쾨펜-가이거 기후구, 3. 연누적강수량 영역에 대한 한반도 지도를 1 km 해상도로 제작하였다. Worldclim V2와 한반도 30년 평균 기상대 데이터를 이용하여 한반도 최저극값온도 격자를 제작하였으며, 이를 활용하여 한반도 식물 내한성구역 격자지도를 제작하여 Proto3에 이용하였다. 쾨펜-가이거 기후구 지도는 Beck et al. (2018)의 쾨펜-가이거 기후구 지도를 Proto3에 적합하게 변형하였으며, 연누적강수량 영역은 Worldclim V2를 활용하여 제작하였다. 제작된 Proto3 기후 인자 지도를 활용하여 외래잡초 별나팔꽃의 정착 확산 가능 지역을 예측한 결과, 남한 대부분의 지역과 북한의 황해도를 포함한 남쪽 지방까지 전체 한반도 격자의 50.7%가 정착, 확산 가능지역으로 예측되었다. 본 결과는 별나팔꽃의 위해성 평가 및 관리 체계 수립 등에 활용가능할 것으로 판단된다.

• 산업경영시스템학회지
• /
• 제17권31호
• /
• pp.59-72
• /
• 1994

This paper deals with ordering policies of consumable goods which have large demand rates in a multi-level distribution system. The system we are concerned consists of one Central Distribution Center(CDC) and N non-identical Regional Distribution Centers(RDCs) which have different demand rates, minimum fillrates, leadtimes, etc. The customer demand on the RDC is stationary poisson and the RDCs demand on the CDC is superposition of Q-stage Erlang distributions. We approximate the RDCs and CDC demand distribution to nomal in order to enhance the efficiency of algorithm. The relevant costs include a fixed ordering cost and inventory holding cost, and backorder cost. The objective is to find a continuous-review ordering policy that minimizes the expected average costs under constraints of minimum fill rates of RDCs and maximum allowable mean delay of CDC. We developed an algorithm for determining the optimal ordering policies of the CDC and the RDCs. We verified and compared the performance of the algorithm through the simulation using the algorithm result as the input parameters.

• Tribology and Lubricants
• /
• 제4권1호
• /
• pp.69-73
• /
• 1988

The effects of journal speed and bearing load on pressure distribution and the temperature distribution of bearing surface are investigated experimentally. The journal bearing which has 219.94mm diameter, length-to-diameter ratio of L/D=0.8 and clearance ratio of 0.004 is used. Journal has a built-in pressure transducer for the measurement of pressure distribution in the mid plane of bearing. Bearing surface temperatures are measured at 60 points. The bearing load is varied from 300 N to 5900 N and journal speed from 300 rpm to 2500 rpm. As the load is increased under constant speed, the location of maximum pressure moves to the site of minimum film thickness, and maximum pressure and absolute value of minimum pressure are increased. The temperature distribution in vicinity of oil inlet shows that heated lubricant's carry-over exists around the oil inlet.

• 대한전기학회논문지:전력기술부문A
• /
• 제50권3호
• /
• pp.112-119
• /
• 2001

This paper proposes an adaptive reclosing scheme which is based on the classification of fault patterns. In case that the first reclosing is unsuccessful in distribution system employing with two-shot reclosing scheme, the proposed method can determine whether the second reclosing will be attempted of not. If the first reclosing is unsuccessful two fault currents can be measured before the second reclosing is attempted, where these two fault currents are utilized for an adaptive reclosing scheme. Total harmonic distortion and RMS are used for extracting the characteristics of two fault currents. And the pattern of two fault currents is respectively classified using a mountain clustering method a minimum-distance classifier. Mountain clustering method searches the cluster centers using the acquired past data. And minimum-distance classifier is used for classifying the measured two currents into one of the searched centers respectively. If two currents have the different pattern it is interpreted as temporary fault. But in case of the same pattern, the occurred fault is interpreted as permanent. The proposed method was tested for the fault data which had been measured in KEPCO's distribution system, and the test results can demonstrate the effectiveness of the adaptive reclosing scheme.

• 유통과학연구
• /
• 제19권8호
• /
• pp.13-24
• /
• 2021

Purpose: This research is aimed to explore factors affecting on Kazakhstan's pharmaceutical distribution industry, selection of various factors and assessment of the level of their influence. Based on the literature review it was defined that there is a great variety of scientific works relating to pharmaceutical distribution industry competitiveness and management improvement. Research design, data and methodology: There is very little research, which to determine the issues of pharmaceutical industry distribution in developing countries, in particular EAEU countries. The algorithm was chosen for research provision: statistical and comparative analysis, correlation, and regression analysis. The data of 1993-2020 obtained from the World Bank, Bureau of National Statistics, National Bank of Kazakhstan, which is expressed by 19 factors as macroeconomic indicators. Results: The chosen variables were selected non-randomly, these economic indicators had the most reliable, unique, and utmost for the whole research period complete information. Conclusions: There could be made adequate conclusions of the research, there is a strong positive relationship for six factors: population, GDP per capita, average annual US dollar exchange rate, the minimum pension, average assigned monthly pension, minimum wage. Pension and wage are the most significant factors affecting on the pharmaceutical distribution industry in Kazakhstan.

• Journal of the Korean Statistical Society
• /
• 제7권2호
• /
• pp.95-98
• /
• 1978

This note deals with the estimations of the variance of a normal distribution $N(\theta,c\theta^2)$ where c, the square of coefficient of variation is assumed to be known. This amounts to the estimation of $\theta^2$. The minimum variance estimator among all unbiased estimators linear in $\bar{x}^2$ and $s^2$ where $\bar{x}$ and $s^2$ are the sample mean and variance, respectively, and the minimum risk estimator in the class of all estimators linear in $\bar{x}^2$ and $s^2$ are obtained. It is shown that the suggested estimators are BAN.