• 에너지공학
• /
• 제12권4호
• /
• pp.309-319
• /
• 2003

본 논문의 목적은 가변속 풍력터빈이 배전망에 미치는 영향을 평가하기 위한 모의해석 모델을 제시하고 제시된 모델을 사용하여 배전망에서의 전력품질에 대한 모의해석을 수행하는 것이다. 모델링된 풍력발전 시스템은 고정피치각을 갖는 풍력터빈과 영구자석형 동기발전기로 구성되며 전력전자 인버터에 의해 가변속 운전 및 무효전력 출력제어가 이루어진다. 풍력터빈 연계에 의한 전압변동 및 고조파 문제를 언급하며, 그 영향에 대하여 제시한 모델을 사용하여 정상상태 및 동특성 해석을 수행한다. 다양한 용량과 다른 출력제어방식의 가변속 풍력터빈을 이용하여 모의하고 평가한다. 사례연구들을 통해 각기 다른 계통상태에서 풍속의 변동 및 다른 출력제어방식에 따른 배전망의 전압변동에 미치는 영향과 고조파 문제를 보여준다. 모델링 및 모의는 PSCAD/EMTDC 프로그램을 기반으로 하여 수행한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1898-1903
• /
• 2010

The hold clamp which is for holding feeder distribution line in direct current can be lengthened its span of life by inserting insulators(EDPM rubber) through improving its function such as preventing damage from temperature change and electric corrosion. This paper reviews the development background, design, manufacture and performance assessment of the hold clamp inserting insulators to prevent circulating current.

• 전기의세계
• /
• 제22권6호
• /
• pp.8-18
• /
• 1973

This paper is a part from the series study on the 22.9KVY multiground destribution system and its is divided into three parts as follow. A.C. Network Analyzer study on the load current flow when one phase line of the feeder is out of seroice because of cutting. A.C. Network Analyzer study on the increasing zero sequence current in the good feeders when one feeder is under fault of single phase short. Field test report of the common use of open telephone line on same poles of 22.9KVY distribution system.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.107-109
• /
• 2003

This paper studies islanding detection distributed of distributed generation(DG). The study of islanding detection has been disconnected DG when power islanding was detected but fault type wasn't distingish. Nearby feeder fault the fault of feeder that not interconnected DG, is a little affect DG and distribution system. Therefore DG not need to disconnect distribution system. We studied islanding detection algorithm considering fault location.

• 전기학회논문지
• /
• 제56권3호
• /
• pp.491-497
• /
• 2007

As dispersed generators was driven in condition interconnecting with utility, it could cause a variety of new effects to the original distribution system that was running as considered only the one-way power flow. Therefore, the protection devices that is builted in distribution system should be designed to be able to operate with disposing of not only a fault of the generator, but also utility condition. Especially, the fault of the feeder interconnected with Dispersed Generator can cause the islanding phenomenon of open DG(Dispersed Generators). This phenomenon has many problems such as a machinery damage, electricity qualify degradation and a difficulty of the system recovery. In the fault therefore, we must separate Dispersed Generator from the system quickly. In this paper, for the fault classification of the interconnected DG and the outside feeder we judge the fault of the interconnected DG and the outside feeder in HMI through data provided by IED(Intelligent Electronic Device) on the network and decide whether it operates or not by sending the result to each relay.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.14_15
• /
• 2009

In this paper, the effect of SFCL which was applied on neutral line of main transformer in distribution substation was analyzed in addition to the position of SFCL among some cases which are studied. The result about the limiting current was compared with the effect with SFCL applied on feeder. The limiting current characteristics are similar to the effect of SFCL on feeder. Therefore, this application of SFCL is required to protection coordination such as SFCL is applied on feeder.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.125-127
• /
• 1999

We generally use Yes-No algorithms for feeder automation algorithm. This logic determines the faulty section by fault current detection information of the fault indicators of each switches in distribution feeder. This paper presents the data acquisition method such as breaker's open status in fault and the determination method of faulty section using fault indicator's information of each switches.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.841-843
• /
• 1998

The second project of the development of distribution automation system was started recently in Korea. We will use two algorithms for feeder automation in this project. The one is Yes/No logic and it will be applied in large city. Yes/No logic determined the faulty section by fault current following information of the fault indicators of each switches. The other is automatic closing process of switches, and it will be applied in rural area. In the latter method, each switches close systematically, and it can find and separate the faulty section, the computer system treats only the feeder reconfiguration finally.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.680-682
• /
• 1996

Korea Distribution Automation System(KODAS) has been designed and implemented for feeder automation using the paircable as communication media. And we bave been developed the telemetering system using the low voltage line. Kepco have been constructed approximately 60% of the Cable TV(CATV) networks in large city in Korea since 1995, so we have been researching the feeder automation based on CATV networks also. We will contruct the system using its in the area with of cable-TV networks and paircable line in the other area for communication media in future.

• Nuclear Engineering and Technology
• /
• 제40권1호
• /
• pp.37-48
• /
• 2008

Flow fields inside feeder pipes have been simulated numerically using a CFD (computational fluid dynamics) code to calculate the shear stress distribution, which is the most important factor in predicting the local regions of feeder pipes highly susceptible to FAC (flow-accelerated corrosion)-induced wall thinning. The CFD approach, with schemes used in this study, to simulate the flow situations inside the CANDU feeder pipes has been verified as it showed a good agreement between the investigation results for the failed feedwater pipe at Surry unit 2 plant in the U.S. and the CFD calculation. Sensitivity studies of the three geometrical parameters, such as angle of the first and second bends, length of the first span between the grayloc hub and the first bend, and length of the second span between the first and the second bends have been performed. CFD analysis reveals that the local regions of feeder pipes of Wolsung unit 1 in Korea, on which wall thickness measurements have been performed so far, are not coincident with the worst regions predicted by the present CFD analysis located in the connection region of straight and bend pipe near the inlet part of the bend intrados. Finally, based on the results of the present CFD analysis, a guide to the selection of the weakest local positions where the measurement of wall thickness should be performed with higher priority has been provided.