• Journal of Korea Water Resources Association
• /
• v.39 no.3 s.164
• /
• pp.227-240
• /
• 2006

In the several decades, various storage facilities have been developed and operated to supply water resource, flood control or environmental preservation etc. Then, how those man-maid storage facilities affect on the downstream water and environment and how the hydrologists can evaluate those features for water resources problem-solving are high-concentrated problems in this field. Most large watersheds in Korea contain various types of artificial facilities such dams, reservoirs, in-land ponds, wetlands etc. But the study to develop the technology for achieving the effect of the variances and properties of the long term streamflow caused by the artificial storage facilities have been on the simple watershed models and experimental modeling in the real fields. In this paper, we introduce the procedure and methods to consider the above problems based on continuous and semi-distributed featured SWAT model. At the first, we describe the elements and mechanisms of storage facilities in SWAT model to see how we can apply that in proper and appropriate manner for real field problems. Then, we applied the process to a sample watershed, Taewha River basin which covers the most of Ulsan region. Specially, we concentrate on our effort to the effect of upper reservoirs on down stream long term flows based on various scenario basis. The result was described and analysed in spacial and temporal variations on that basin using the precise manner.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.6
• /
• pp.655-662
• /
• 2021

This study aimed to estimate exploitable groundwater for the sustainable supply of groundwater in the Jinju region of South Gyeongsang Province. As an integrated hydrologic analysis model, SWAT-MODFLOW was used to estimate the distributed groundwater recharge in consideration of land use and soil distribution. As a result of calibration of the model, the coefficient of determination between the observed flow and the simulated flow was 0.75-0.80, which was good. The simulated groundwater recharge rate showed a spatio-temporal distribution due to heterogeneous watershed characteristics. The amount of groundwater recharge shows lower values over winter and spring, but it increases according to the pattern of precipitation in summer and autumn. The calculated average annual groundwater recharge was compared with the result using the baseflow separation method of natural flow, and the deviation of both results was small, within 3 %, confirming the validity of the estimated groundwater recharge. Exploitable groundwater is defined as the amount of recharge corresponding to low flow with 10 years of return period. Therefore, in this study, 14.2 % of the annual precipitation was found to be exploitable as a result of calculating the amount of recharge at a 10-year frequency using a statistical frequency analysis technique.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.6
• /
• pp.66-73
• /
• 2017

Empirical erosion models like Universal Soil Loss Equation (USLE) models have been widely used to make spatially distributed soil erosion vulnerability maps. Even if the models detect vulnerable sites relatively well utilizing big data related to climate, geography, geology, land use, etc within study domains, they do not adequately describe the physical process of soil erosion on the ground surface caused by rainfall or overland flow. In other words, such models are still powerful tools to distinguish the erosion-prone areas at large scale, but physics-based models are necessary to better analyze soil erosion and deposition as well as the eroded particle transport. In this study a physics-based soil erosion modeling system was developed to produce both runoff and sediment yield time series at watershed scale and reflect them in the erosion and deposition maps. The developed modeling system consists of 3 sub-systems: rainfall pre-processor, geography pre-processor, and main modeling processor. For modeling system validation, we applied the system for various erosion cases, in particular, rainfall-runoff-sediment yield simulation and estimation of probable maximum sediment (PMS) correlated with probable maximum rainfall (PMP). The system provided acceptable performances of both applications.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.61-61
• /
• 2019

우리나라는 대부분이 산지(약 65%)로 구성되어 있어 강우 시 그 공간적 분포의 변동성이 매우 큰 편이며, 특히 전형적인 산지지형인 댐 유역의 경우 고도 변화 등에 기인한 지형특성 등에 따라 강우의 형태 및 패턴과 이에 따른 유출변화가 큰 복잡한 특성을 갖는다. 이로 인해 단순히 지점강우들을 공간보간(평균)한 면적강우를 홍수 유출모의 등에 활용할 경우 그 신뢰도가 매우 낮은 경우가 많아, 수문모의에 있어 레이더에 기반을 둔 공간 분포형 강우 등의 도입 검토가 요구된다. 한편, 최근 기상청에서는 보다 정확한 레이더 강수량 추정 값의 제공을 위해 "레이더-AWS 강우강도(Radar-AWS Rainrates, RAR)" 산출 기술을 지속적으로 개선하고 있으며, 이는 지상 우량계 대비 상당한 정확도를 보이고 있다. 본 연구에서는 국내 산지지형을 대표하며, 타 댐 유역에 비해 비교적 수문(수위/유량)관측소와 자료가 많은 용담시험유역에 기상레이더 강수량 추정 값(RAR)을 적용해 산지지형 댐 유역에서 강우의 시공간적 변동성과 이에 따른 홍수량의 정확한 분석을 통해 홍수 시 댐 유입량의 정확한 산정 등에 활용할 목적으로 홍수 유출모의를 수행하고자 한다. 모의에는 최근 5년(2014~2018년)동안 발생한 비교적 독립적인 1~2개(연도별)의 홍수사상을 적용하였으며, 모형은 분포형 강우를 적용할 수 있는 비교적 간단한 모형인 HEC-HMS를 활용하였다. HEC-HMS는 주로 집중형 수문모형(Lumped Hydrologic Model)으로 분류되어 레이더 강우와 같은 분포형 자료의 입력을 주로 적용치는 않고 있지만, HEC-GeoHMS와 ModClark 방법을 활용하면 격자단위의 분포형 강우를 적용할 수 있는 형태의 모델 구축이 가능하다. 모의 결과는 기존 유역평균 강우를 적용한 방법과 비교를 통해 그 개선점을 검토하고자 하며, 이를 통하여 산지지역 댐 유역의 홍수특성을 보다 더 정확하게 분석해보고자 한다. 한편, ModClark을 적용한 홍수 유출모의는 단순히 소유역별 도달시간의 격자별 비율을 고려한 홍수추적으로 그 해석상의 한계가 있어, 최근 개발된 하이브리드 수문모형(Hybrid Hydrologic Model, Distributed-Clark) 등도 동일유역에 대해 도입 적용할 계획에 있다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6B
• /
• pp.697-707
• /
• 2008

The grid-based KIneMatic wave STOrm Runoff Model (KIMSTORM) by Kim (1998) predicts the temporal variation and spatial distribution of overland flow, subsurface flow and stream flow in a watershed. The model programmed with C++ language on Unix operating system adopts single flowpath algorithm for water balance simulation of flow at each grid element. In this study, we attempted to improve the model by converting the code into FORTRAN 90 on MS Windows operating system and named as ModKIMSTORM. The improved functions are the addition of GAML (Green-Ampt & Mein-Larson) infiltration model, control of paddy runoff rate by flow depth and Manning's roughness coefficient, addition of baseflow layer, treatment of both spatial and point rainfall data, development of the pre- and post-processor, and development of automatic model evaluation function using five evaluation criteria (Pearson's coefficient of determination, Nash and Sutcliffe model efficiency, the deviation of runoff volume, relative error of the peak runoff rate, and absolute error of the time to peak runoff). The modified model adopts Shell Sort algorithm to enhance the computational performance. Input data formats are accepted as raster and MS Excel, and model outputs viz. soil moisture, discharge, flow depth and velocity are generated as BSQ, ASCII grid, binary grid and raster formats.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.3
• /
• pp.193-210
• /
• 2013

This study aims to assess the slope stability variation of Jeollabuk-do drainage areas by RCM model outputs based on A1B climate change scenario and infinite slope stability model based on the specific catchment area concept. For this objective, we downscaled RCM data in time and space: from watershed scale to rain gauge scale in space and from monthly data to daily data in time and also developed the GIS-based infinite slope stability model based on the concept of specific catchment area to calculate spatially-distributed wetness index. For model parameterization, topographic, geologic, forestry digital map were used and model parameters were set up in format of grid cells($90m{\times}90m$). Finally, we applied the future daily rainfall data to the infinite slope stability model and then assess slope stability variation under the climate change scenario. This research consists of two papers: the first paper focuses on the methodologies of climate change scenario preparation and infinite slope stability model development.

• Korean Journal of Environment and Ecology
• /
• v.30 no.6
• /
• pp.986-995
• /
• 2016

The objective of this study was to analyze the distribution of endangered fish species and elucidate their relations on chemical water quality, physical habitat conditions and ecological stream health. The dominant species in the watershed was Pseudopungtungia nigra (Pn), Gobiobotia macrocephala (Gm), Gobiobotia brevibarba (Gb), Liobagrus obesus (Lo), and Iksookimia choii (Ic) in the order. The species of Pn designated as "critical endangered species (I) (CER)", was most widely distributed species among the endangered species, so the designation of the species should be re-evaluated. The endangered species was most popular (4 species, 384 individuals) in the Cho-River region of eighteen lotic regions. According to the analysis of chemical tolerance limits in the habitats with endangered fish species, biological oxygen demand (BOD) and total phosphorus (TP) was analyzed as "very good" (Ia) and "good condition" in the chemical criteria of the Ministry of Environment, Korea. Also, chemical conditions, based on ammonia-N ($NH_{4+}$), total nitrogen (TN), phosphate-P ($PO_{4^-}P$) were much better in the habitat with endangered species (Hw) than the habitat without endangered species (Ho). In the meantime, the species of Ic showed wide ranges on the chemical tolerance, so physical habitat conditions, such as the size of substrate particles (sand) and hydrological regime, were considered as more important factors than the chemical water quality, if the water quality is not largely degraded. The endangered species were also more distributed in the high-order (4-6) streams than the low-order (1-3) streams. The evaluation of ecological stream health, based on multi-metric model of the Index of Biological Integrity (IBI), showed the large difference between the Hw (21.6, fair condition)and Ho (30.5, good condition), indicating that the habitat maintained well chemically and physically had higher distributions of endangered species. Overall, the designation of CER on the Pn should be re-evaluated due to wide-distributions, and the protections from water pollution and the habitat conservations on the endangered species are necessary in the watershed.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.3
• /
• pp.11-18
• /
• 2012

Increasing concern about biodiversity has lead to a rise in demand on the spatial assessment of biological resources such as biodiversity assessment, protected area selection, habitat management and restoration in Korea. The purpose of this study is to create species richness map through data collection and modeling techniques for wildlife habitat assessment. The GAM (Generalized Additive Model) is easy to interpret and shows better relationship between environmental variables and a response variable than an existing overlap analysis and GLM (Generalized Linear Model). The study area delineated by a large watershed contains Jirisan national park, Mt. Baekun and Sumjin river with three kinds of protected areas (a national park, a landscape ecology protected area and an otter protected area). We collected the presence-absence data for wildlife (mammals and birds) using a stratified random sampling based on a land cover in the study area and implemented natural and socio-environmental data affecting wildlife habitats. After doing a habitat use analysis and specifying significant factors for each species, we built habitat suitability models using a presence-absence model and created habitat suitability maps for each species. Biodiversity maps were generated by taxa and all species using habitat suitability maps. Significant factors affecting each species habitat were different according to their habitat selection. Although some species like a water deer or a great tit were distributed at the low elevation, most potential habitats for mammals and birds were found at the edge of a national park boundary or near a forest around the medium elevation of a mountain range. This study will be used for a basis on biodiversity assessment and proected area selection carried out by Ministry of Environment.

• Journal of Korea Water Resources Association
• /
• v.40 no.6 s.179
• /
• pp.431-446
• /
• 2007

Groundwater flow in a basin is greatly affected by many hydrogeological and hydrological characteristics of the basin. A groundwater flow model for the Kap-cheon basin ($area=648.3km^2$) in the Geum river basin was established using MODFLOW by fully considering major features obtained from observed data of 438 wells and 24 streams. Furthermore, spatial groundwater recharge distribution was estimated employing accurately calibrated watershed model developed using SWAT, a physically semi-distributed hydrological model. Model calibration using observed groundwater head data at 86 observation wells yielded the deterministic coefficient of 0.99 and the water budget discrepancy of 0.57%, indicating that the model well represented the regional groundwater flow in the Kap-cheon basin. Model simulation results showed that groundwater flow in the basin was strongly influenced by such factors as topological features, aquifer characteristics and streams. The streams in mountainous areas were found to alternate gaining and losing steams, while the streams in the vicinity of the mid-stream and down-stream, especially near the junction of Kap-cheon and Yudeong-cheon, areas were mostly appeared as gaining streams. Analysis of water budget showed that streams in mountainous areas except for the mid-stream and up-stream of Yudeong-cheon were mostly fed by groundwater recharge while the streams in the mid and down-stream areas were supplied from groundwater inflows from adjacent sub-basins. Hence, it was concluded that the interactions between surface water-groundwater in the Kap-cheon basin would be strongly inter-connected with not only streams but also groundwater flow system itself.

• Journal of Korea Water Resources Association
• /
• v.33 no.6
• /
• pp.775-782
• /
• 2000

Water quality models can be applied to manage the regional water quality problems and to estimate the target and allowable pollution load in watershed effectively. Since the models such as QUAL2E, W ASP5 and HSPF need many data and are not easily applied in real systems, the water quality model, which would be simple and easily applicable, has been required. Thus, an Analytical Model of BOD(AMB) considering travel time of pollutant was developed for the total pollution load regulation in drainage basin. It was found that the main stream length of a sub-basin in the AMB should be shorter than 7km and the length of distributed pollutant load should also be shorter than 3.5km in a sub-basin. The basin in the AMB could be divided into sub-basins with almost same hydraulic characteristics and reaction rate constant satisfying the proposed stream length. The running results of the AMB in a small stream were very close to the results of QUAL2E, which is widely used one in the world. Therefore, the AlVIB can be used to regulate the total pollution load in drainage district by local government.rnment.