• ETRI Journal
• /
• v.31 no.5
• /
• pp.525-533
• /
• 2009

This paper proposes a distributed borrowing addressing (DIBA) scheme to solve problems of failure in address assignments resulting from limited tree depth and width when the distributed address assignment mechanism is used in a ZigBee/IEEE 802.15.4 wireless sensor network. DIBA is a method of borrowing addresses from neighbor nodes for newly entering nodes and assigning the borrowed addresses. Its network or sensing coverage can increase with almost the same overhead as the existing method. DIBA is a simple and lightweight means of addressing and routing, making it suitable for wireless sensor networks. Simulations showed that DIBA is a distributed addressing scheme with consistently excellent performance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.8
• /
• pp.694-701
• /
• 2013

This paper deals with the problem of accurately tracking a single target moving through UWSNs (Underwater Wireless Sensor Networks) by employing underwater acoustic sensors. This paper addresses the issues of estimating the states of the target, and improving energy efficiency by applying a Kalman filter in a distributed architecture. Each underwater wireless sensor nodes composing the UWSNs is battery-powered, so the energy conservation problem is a critical issue. This paper provides an algorithm which increases the energy efficiency of each sensor node through WuS (Waked-up/Sleeping) and VM (Valid Measurement) selecting schemes. Simulation results illustrate the performance of the distributed tracking filter.

• Journal of information and communication convergence engineering
• /
• v.15 no.1
• /
• pp.37-42
• /
• 2017

The constrained application protocol (CoAP) can be used for remotely controlling various sensor devices in Internet of Things (IoT) networks. In CoAP, to support the handover of a mobile sensor device, service discovery and message transmission needs to be repeated, although doing so would increase the handover delay significantly. To address this limitation of CoAP, a centralized CoAP scheme has been proposed. However, it tends to result in performance degradation for an inter-domain handover case. In this letter, we propose a distributed CoAP handover scheme to support the inter-domain handover. In the proposed scheme, a distributed mobility agent (DMA) is used for managing the location of mobile sensors in a domain and performing handover control operations with its neighboring DMAs in a distributed manner. A performance comparison reveals that the proposed scheme offers a performance improvement of up to 29.5% in terms of the handover delay.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.3 s.357
• /
• pp.18-25
• /
• 2007

In sensor networks, sensor nodes have limited computational capacity, power and memory. Thus energy efficiency is one of the most important requirements. How to extend the lifetime of wireless sensor networks has been widely discussed in recent years. However, one of the most effective approaches to cope with power conservation, network scalability, and load balancing is clustering technique. The function of a cluster head is to collect and route messages of all the nodes within its cluster. Cluster heads must be changed periodically for low energy consumption and load distribution. In this paper, we propose an energy-aware cluster head selection algorithm and Distance Estimation-based distributed Clustering Algorithm (DECA) in wireless sensor networks, which exchanges cluster heads for less energy consumption by distance estimation. Our simulation result shows that DECA can improve the system lifetime of sensor networks up to three times compared to the conventional scheme.

• Journal of Communications and Networks
• /
• v.17 no.6
• /
• pp.602-608
• /
• 2015

In this paper, the limited error tracking problem is investigated for distributed leader-following wireless sensor networks (LFWSNs), where all sensors share data by the local communications, follower sensors are influenced by leader sensors directly or indirectly, but not vice versa, all sensor nodes track a reference state that is determined by the states of all leader sensors, and tracking errors are limited. In a LFWSN, the communicating graph is mainly expressed by some complete subgraphs; if we fix subgraphs that are composed of all leaders while all nodes in complete subgraphs of followers run on the sleeping-awaking method, then the fixed leaders and varying followers topology is obtained, and the switching topology is expressed by a Markov chain. It is supposed that the measurements of all sensors are corrupted by additive noises. Accordingly, the limited error tracking protocol is proposed. Based on the theory of asymptotic boundedness in mean square, it is shown that LFWSN keeps the limited error tracking under the designed protocol.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.9
• /
• pp.2134-2153
• /
• 2013

A network-coding-based scheme is proposed to improve the energy efficiency of distributed storage systems in WSNs (Wireless Sensor Networks). We mainly focus on two problems: firstly, consideration is given to effective distributed storage technology; secondly, we address how to effectively repair the data in failed storage nodes. For the first problem, we propose a method to obtain a sparse generator matrix to construct network codes, and this sparse generator matrix is proven to be the sparsest. Benefiting from this matrix, the energy consumption required to implement distributed storage is reduced. For the second problem, we designed a network-coding-based iterative repair method, which adequately utilizes the idea of re-encoding at intermediate nodes from network coding theory. Benefiting from the re-encoding, the energy consumption required by data repair is significantly reduced. Moreover, we provide an explicit lower bound of field size required by this scheme, which implies that it can work over a small field and the required computation overhead is very low. The simulation result verifies that the proposed scheme not only reduces the total energy consumption required to implement distributed storage system in WSNs, but also balances energy consumption of the networks.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.35 no.2
• /
• pp.53-69
• /
• 2010

This paper proposes an ant-based routing algorithm, Ant System-Routing in wireless Senor Networks(AS-RSN), for wireless sensor networks. Using a transition rule in Ant System, sensors can spread data traffic over the whole network to achieve energy balance, and consequently, maximize the lifetime of sensor networks. The transition rule advances one of the original Ant System by re-defining link cost which is a metric devised to consider energy-sufficiency as well as energy-efficiency. This metric gives rise to the design of the AS-RSN algorithm devised to balance the data traffic of sensor networks in a decentralized manner and consequently prolong the lifetime of the networks. Therefore, AS-RSN is scalable in the number of sensors and also robust to the variations in the dynamics of event generation. We demonstrate the effectiveness of the proposed algorithm by comparing three existing routing algorithms: Direct Communication Approach, Minimum Transmission Energy, and Self-Organized Routing and find that energy balance should be considered to extend lifetime of sensor network and increase robustness of sensor network for diverse event generation patterns.

• Structural Engineering and Mechanics
• /
• v.32 no.6
• /
• pp.787-809
• /
• 2009

Recent interest in the use of wireless sensor networks for structural health monitoring (SHM) is mainly due to their low implementation costs and potential to measure the responses of a structure at unprecedented spatial resolution. Approaches capable of detecting damage using distributed processing must be developed in parallel with this technology to significantly reduce the power consumption and communication bandwidth requirements of the sensor platforms. In this investigation, a damage detection system based on a distributed processing approach is proposed and experimentally validated using a wireless sensor network deployed on two laboratory structures. In this distributed approach, on-board processing capabilities of the wireless sensor are exploited to significantly reduce the communication load and power consumption. The Damage Location Assurance Criterion (DLAC) is used for localizing damage. Processing of the raw data is conducted at the sensor level, and a reduced data set is transmitted to the base station for decision-making. The results indicate that this distributed implementation can be used to successfully detect and localize regions of damage in a structure. To further support the experimental results obtained, the capabilities of the proposed system were tested through a series of numerical simulations with an expanded set of damage scenarios.

• Journal of Applied Reliability
• /
• v.6 no.4
• /
• pp.297-306
• /
• 2006

In this paper, We presented the algorithm for estimating a reliability between nodes in wireless distributed sensor networks (DSN). To estimate the reliability between nodes, we first modeled DSN as probability graph. Links of the graph are always reliable and the probability of node failure is independent. After all possible simple path which can be established between two nodes are examined, we perform sharp operation to remove repetition event between two nodes. Using probability for each variable of the minimized Boolean equation, we present the reliability formula.

• Journal of Information Technology Services
• /
• v.8 no.3
• /
• pp.171-184
• /
• 2009

Since the development of the Distributed Hash Tables (DHTs), the distributed lookup services are one of the hot topics in the networking area. The main reason of this popularity is the simplicity of the lookup structure. However, the simple key based search mechanism makes the so called "keyword" based search difficult if not impossible. Thus, the applicability of the DHTs is limited to certain areas. In this paper. we find that DHTs can be used as the ubiquitous sensor network (USN) metadata lookup service across a large number of sensor networks. The popularity of the Ubiquitous Sensor Network has motivated the development of the USN middleware services for the sensor networks. One of the key functionalities of the USN middleware service is the lookup of the USN metadata, by which users get various information about the sensor network such as the type of the sensor networks and/or nodes, the residual of the batteries, the type of the sensor nodes. Traditional distributed hash table based lookup systems are good for one sensor network. However, as the number of sensor network increases, the need to integrate the lookup services of many autonomous sensor networks so that they can provide the users an integrated view of the entire sensor network. In this paper, we provide a hybrid lookup model, in which the autonomous lookup services are combined together and provide seamless services across the boundary of a single lookup services. We show that the hybrid model can provide far better lookup performance than a single lookup system.