• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.2
• /
• pp.10-20
• /
• 2013

To evaluate the safety of a beam structure, strains are measured as an indicator of structural states. However, unless strain sensors are installed exactly on where maximum or other representative strains occur, the techniques by which rational assessment through measured strains is accomplished are required. Thus, this study suggests a process to estimate strain distribution on the steel beam from discrete strains measured by sensors. In the presented technique, the targeted beam is regarded to be subjected to unknown loads so that applicability is enhanced. Final strain distribution is given as form of a function after regression analysis. To verify the performance of estimation, a bending test for steel beam on which distributed and concentrated loads simultaneously act is conducted. From the comparison between estimated and directly measured strains in the test, the curve of strain distribution and the strain at arbitrary location could be predicted within maximum relative error 3.32% and maximum absolute error of $2.32{\mu}{\varepsilon}$, respectively. Thus reliable and practical monitoring is expected to apply effectively for the steel beam structure.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.3
• /
• pp.39-49
• /
• 2017

Standards suitable for local conditions on deciding one-way road are desperately required to solve traffic congestions at the backside roads in the old downtown areas which were not designated as a road by urban planning. Therefore, this study intends to re-establish a standard to decide one-way road which is regarded to be of the greatest effect among traffic system control methods in order to control one-way road system more efficiently. Also, this paper suggests a standard for such decision to improve efficiency of using backside roads and expand designation of one-way road. AHP (analytic hierarchy process) was carried out among the traffic experts to find out the factors to decide one-way road system. Its result reveals that importance of causing accident to walking quantity and traffic was high. 10,000 cases out of all the possible scenarios of accident by combining detailed evaluation items and scales were extracted to draw the outcomes of analyzing the scenarios, which were schematized in a graph. As a result, division by three sections of point of inflection was verified into $1{\leq}$ section A<1.91, 1.9$1{\leq}$ section B<2.08, and $2.08{\leq}$ section C<3. In other words, priority of deciding one-way road should be given to section C, the highest total point, while posterior to section A, where relatively low points are distributed. The standard on deciding one-way road suggested in this paper may be used for designating one-way road and basic data to re-establish the relevant system in the future.

• Journal of Digital Convergence
• /
• v.15 no.12
• /
• pp.517-529
• /
• 2017

The purpose of this study is to develop and evaluate the scale for university students' health behaviors. This research is based on Roger's(1975) Protection Motivation Theory and Weinstein(1988)'s Precaution Adoption Process Model as theoretical frameworks. The contents of the scale were first abstracted from personal depth interviews of qualitative study on university students' health behavior experiences and review of its related literature. The initial items consisted of 76 behavior questions and 34 perception questions. After conducting the preliminary test, 33 behavior questions and 24 perception questions were selected for the final test by revisions on the basis of the result of the content validity test and the item understanding test. The questionnaires for the final test were distributed to 400 students enrolled in three universities. The questionnaires collected from 373 participants were analyzed by the SPSS program. From the examination of construct validity, item correlation, and factor relation turned out to be relevant. Five factors were determined from 27 items with a cumulative explained variance of 54.498 %. After examining reliability and validity of the collected dat, 27 items were finalized as the scale for university students' health behaviors.

• Journal of Technologic Dentistry
• /
• v.37 no.3
• /
• pp.131-144
• /
• 2015

Purpose: This study set out to propose plans for more efficient and effective clinical practice by investigating the current state of clinical practice in the field of dental technology and thus provide basic data to develop pre- and post-education programs for clinical practice. Methods: The subjects include dental technicians at dental technical laboratories that were appointed as the place of clinical practice by the Department of Dental Technology of G University. The survey period spanned from December 22, 2014 to January 20, 2015. Total 250 questionnaires were distributed to them, and 190(76.0%) were returned. After excluding 23 whose answers were uncertain or seemed to lack reliability, total 167(66.8%) were used in final analysis. Results: 1. The most frequent practice the student did during clinical practice was articulator attachment, which was followed by pin operation or model making, one's own task and practice, sand and crow sculpturing, burying, casting, and grinding. 2. In case of going through the entire process, porcelain had the most students at 39(23.4%), being followed by crown & bridge at 28(16.8%), clinical model at 23(13.8%), full denture at 17(10.2%), and partial denture at 17(10.2%) in the order. 3. Of the students, 59.8%(30.5% for reinforced basic practice; 29.3% for intensive practice education) said that intensive practice education should be reinforced in school; and 22.3% said that intensive theory and practice education was needed, which indicates that 82.6% voiced their opinion of reinforcing education around practice. 4. The students felt that they lacked diligence, passion, and theoretical knowledge somewhat and were relatively good at clinical adaptation and operational skills. Conclusion: The findings show that the students felt an absolute lack of practice education as the school education was focused on theory and national exams in the field of dental technology, thus raising a need to reinforce practice education. Of all the respondents, 62.9% said there was a need to improve the current education with a focus on jobs. In future, education of dental technology should work to bring up able dental technicians that can perform in clinical dental technology right after graduation by reinforcing job-based practice education.

• Journal of Korean Medicine Rehabilitation
• /
• v.30 no.2
• /
• pp.139-152
• /
• 2020

Objectives To explore the traffic injury patients' experience on health care utilization of Korean Medicine (KM) practice and perception of health care system for developing a Korean medicine clinical practice guideline (CPG) of traffic injuries by survey method. Methods Two hundred ten patients in suffering from traffic injuries were surveyed from September 1st, 2019 to January 31th, 2020 at 2 University Hospitals (Pusan National Korean Medicine Hospital and Kyung Hee Korean Medicine Hospital at Gangdong) and 1 Spine Specialty Hospital (Jaseng Hospital of Korean Medicine). A structured questionnaire of experience on health care utilization of KM practice and perception of health care system of was distributed to responders by visits and all data were statistically analysed. Results Survey results showed high satisfaction of patients with the experience of KM treatments in order of daoyin exercise (7.8±2.3), chuna manual therapy (7.7±4.0), pharmacoacupuncture (7.4±3.0) etc. Safety concerns were reported in 9.1% subjects and 205 (97.6%) patients answered that collaboration with KM and western medicine is necessary for patients with traffic injuries. For the patients' requirement for extending insurance coverage, the most required therapy was chuna manual therapy (57.5%) and pharmacoacupuncture (42.0%). Conclusions This study presented the realistic patient-centered perception of KM practice and health care system in Korea. These results will provide basic data to be reflected in the process of adaptation for the revision of Korean Medicine CPG for traffic injuries.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.7 s.349
• /
• pp.50-59
• /
• 2006

The new communication paradigm is rapidly shifted from wireless mobile networks to an All-IP(Internet Protocol) network, led by service industry leaders and communication manufacturers. In this paradigm, providing authentication and session keys of a subscriber becomes one of the critical tasks because of IP open accessibility among heterogeneous networks. In this paper, we introduce authentication process procedure of heterogeneous wireless mobile networks and develop so-called IMAS(Integrated Mobile Authentication Server) which can securely inter-work among all mobile networks and support the legacy networks with backward compatibility. Especially, in designing IMAS, mobile authentication inter-working mechanism, key management technique, and other issues to be overcome are presented. We analyze and evaluate the performance of authentication algorithm which creates session key. A simulation environment of IMAS is established, and a performance(TPS; Transaction Per Second) result is analyzed and evaluated. It turned out that IMAS works among heterogeneous wireless mobile networks without compensating efficiency and functionalities of the legacy networks and decrease the entropy of data redundancy and data inconsistency among networks because of the integrity of the distributed Data Base(DB).

• Journal of Korea Water Resources Association
• /
• v.53 no.3
• /
• pp.155-166
• /
• 2020

In this study, we applied the Radar-AWS Rainrates (RAR), weather radar-based quantitative precipitation estimations (QPEs), to the Yongdam study watershed in order to perform the flood runoff simulation and calculate the inflow of the dam during flood events using hydrologic model. Since the Yongdam study watershed is a representative area of the mountainous terrain in South Korea and has a relatively large number of monitoring stations (water level/flow) and data compared to other dam watershed, an accurate analysis of the time and space variability of radar rainfall in the mountainous dam watershed can be examined in the flood modeling. HEC-HMS, which is a relatively simple model for adopting spatially distributed rainfall, was applied to the hydrological simulations using HEC-GeoHMS and ModClark method with a total of eight independent flood events that occurred during the last five years (2014 to 2018). In addition, two NCL and Python script programs are developed to process the radar-based precipitation data for the use of hydrological modeling. The results demonstrate that the RAR QPEs shows rather underestimate trends in larger values for validation against gauged observations (R² 0.86), but is an adequate input to apply flood runoff simulation efficiently for a dam watershed, showing relatively good model performance (E_NS 0.86, R² 0.87, and PBIAS 7.49%) with less requirements for the calibration of transform and routing parameters than the spatially averaged model simulations in HEC-HMS.

• Journal of Korean Society of Forest Science
• /
• v.98 no.1
• /
• pp.125-131
• /
• 2009

To facilitate the sustainable forest management, Forest Service in Korea has assigned 2.9 million hectare forests as 'intensive management forests' and encouraged local governments to develop a strategic management plan for their forests. One of problems for the sustainable forest management in Korea is the skewed distribution of forest age classes. Currently the majority of forestlands in Korea is occupied by age classes III and IV. In this study, we intended to find an optimum harvest volume, which enable one to make the intensive management forest in Youngdong-Gun evenly distributed for the age classes and allow an even harvest volume through a 50 year time horizon. To develop an optimization model, we applied the goal programming technique which is adequate for a multi-purpose management planning. The results indicated that it is necessary to harvest 1.2 million cubic meters in each decade to achieve the most stable distribution of age classes for the study site. The harvest volume target resulted from this study would be used in a management planning or an associated policy making process in the future.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.3
• /
• pp.105-113
• /
• 2010

This study is for the preservation plan of the tradition space which is performed by the damage status analysis through performing the value assessment. Especially, it is an experimental study for finding the process and methods by analyzing the major element for the value assessment of the selected object's damage status through the expert group who are systematized in their interest to conserve the traditional structure in traditional space. For that purpose, this study should be performed by the fundamental understanding of the physical property of the Supyo-bridge and the condition of the selected site's environment. Meanwhile, this study has been done that 'map of the damage status distribution' for making records of damage status of the Supyo-bridge on the property utilized field measurement adapted by photogrammetry and assessment guidelines, which are for investigation on damage status of objects that are standardized 'Raccomandazioni Normal' which could be said construction culture assets management guidelines of Italian government. As the result of investigation, damage status of each part in the Supyo-bridge was mostly composed of damage by sediment and corrosion and in case of 9 damage types including corrosion, in consideration of physical and chemical properties and distribution status of those elements, it is made an judgement that is not working as a threatened factor regarding security of the Supyo-bridge. On the contrary, for the improvement landscape, in case of 'Thermoclastism' phenomenon observed in 'upper floor', 'Myungae stone' and 'bridge pier' is that when taking it into consideration that is widely distributed concentrated on the bridge pier, surface reinforcement job along with elimination of damage part will be judged to be requested for earliest treatment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.11
• /
• pp.1206-1218
• /
• 1992

Token ring systems which control to switch the data stream of networks by passing the token have been widely used to medium access controls in many ring or bus topology LANs. The system could be modeled for analysis as single-server-multi-queue system of the cyclic service method. These concepts could be expanded to multi-token ring systems interconnected with single ring consisting of bridges implemented simply to be stored and transmitted. In the proposal for the performance analysis of the interconnected token ring system, in has been assumed M/G/1 queueing model that frame arrivals are the Poisson process at each station queue and frame sizes are independently and identically distributed. And the average time delays were analyzed mathematically for arbitrary frame transferred from source station to destination area. The time delay of the frame transmission could be explained as the sum of the average time which the token passed from arbitrary position to source station, such as the waiting time in the source station transferring the previous arrival frames, and the propagation time from source station to interdestinated point. These delays were given as the sum of the duration from inner and outer bridge queues, the time delays from inner and outer bridge queues, and the time from outer bridge queue to destination station. These results were investigated by varing parameters effected to total time delays. In the results, those factors to be effected to dominant the total time delays were increased were in the cases of the high arrival rates and the high ration of destination of the other outerring. The system were shown the time delays increased exponentially in spite of the priority service policy. In order to decreasing the number of outerrings and increasing the number of nodes in backbone relatively, so the systems could be decreased the total delay in the interconnected token ring system.