• 헤리티지:역사와 과학
• /
• 제51권4호
• /
• pp.224-233
• /
• 2018

충주 호암동유적 및 부여 청송리유적 출토 청동기 33점의 분석을 통해 초기철기시대 청동기의 제작기술과 납의 산지를 연구하였다. 휴대용X선형광분석기를 이용한 비파괴 성분분석 결과 출토된 청동기 33점은 인위적으로 납을 첨가한 구리(Cu), 주석(Sn), 납(Pb)의 3원계 합금으로 판단된다. 4점의 청동기(동경 2점, 동검 1점, 동모 1점)의 전자탐침미소분석기를 이용한 성분분석 결과 충주 및 부여 출토 동경은 30%의 주석(Sn)과 10% 미만의 납이 포함된 고주석청동기로 확인되었으며 동모와 동검에서는 20% 내외의 주석과 5%의 납(Pb)이 검출되었다. 미량원소로는 철(Fe), 아연(Zn), 비소(As), 은(Ag), 니켈(Ni), 황(S) 및 코발트(Co)가 검출되었다 청동기 4점은 기능적인 면을 고려하여 합금되었으며 주석함량이 높아 주조 이후 열처리는 하지 않았다. 열이온화질량분석기를 이용한 충주와 부여 출토 청동기의 납동위원소비 분석을 통해 초기철기시대 청동기 33점은 Zone 1을 제외한 한반도 남부 전 지역에 걸쳐 분포함을 확인하였다. 이를 통해 충주와 부여에서 출토된 청동기는 경상도 지역의 납 원료를 사용하지 않고 한반도 내 다양한 산지의 납 원료를 사용했음을 판단하였다. 출토지가 달라 제작기술과 원료산지의 차이점이 존재할 것이라 추정하였으나 분석결과를 통해 이 시기의 청동기의 제작기술은 일반화되어 있었으며, 다양한 곳에서 다양한 산지의 원료를 이용하여 청동기를 제작하였음을 추정하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권5호
• /
• pp.9-15
• /
• 2023

이 연구에서는 적층시험체 제작 방식에 따른 시멘트계 복합재료의 적층성능과 강도특성을 분석하였다. 레이어 높이에 따른 적층성능평가결과, 직선부과 곡선부에서 레이어 높이가 10 mm일 때 가장 높은 치수 안정성을 나타내었다. 몰드 타설 시험체와 Printing-Z 시험체의 재령 28일 압축강도는 동일한 압축강도 성능을 나타내었다. 반면, Printing-X 시험체의 재령 28일 압축강도는 71.72 MPa로 가장 낮았으며, 몰 드 제작 시험체와 Printing-Z시험체 대비 평균 8%가 낮은 압축강도를 나타내었다. 적층시험체의 쪼갬인장강도는 몰드 제작 시험체와 유사한 성능을 나타낼 수 있으나, 하중 가력방향에 대한 레이어의 방향과 시험체 내 레이어의 개수에 따라 10% 이상의 강도성능 저하현상이 나타날 수 있다. X-ray CT 분석을 통한 적층시험체의 계면 분석결과, 레이어의 계면을 따라 일정한 크기의 공극이 분포함을 확인하였다.

• 동의생리병리학회지
• /
• 제17권1호
• /
• pp.177-182
• /
• 2003

This study was carried out to understand the effects of Bambusae Caulis in Liquamen on blood sugar in the db/db mice. Refined Bambusae Caulis in Liquamen C. D(BCL.C. D)manufactured by high temperature production process and Bambusae Caulis in Liquamen(H-BCL) manufactured & distributed by HANLIM PHARM.COM., LTD were used. The Bambusae Caulis in Liquamen extracted from bamboo charooal manufacturing process was filtered and refined. The effects of Bambusae Caulis in Liquamen were administered orally to mice for 6weeks and its anti-diabetic effect examined. The effects of BCL.C. D and H-BCL were observed in terms of blood sugar. creatinine. BUN and GPT in db/db mice. The results were as follows : The amount of glucose was slightly decreased (P<0.05) in the B CL.C-treated groups compared with the control. The amount of glucose was significantly decreased (P<0.01) in the BCL.D and H-BCL-treated groups compared with the control. The amount of creatinine did not show any differences among four groups. The amount of blood urea nitrogen did not show any differences in the case of BCL.C-treated groups. but observed significant decrease in the case of BCL.D and H-BCL-treated groups. The amount of GPT did not show any differences in the case of BCL.D-treated groups. but observed significant increase in the case of BCL.C and H-BCL-treated groups.

• 한국식품영양학회지
• /
• 제24권4호
• /
• pp.657-663
• /
• 2011

본 연구에서는 서울, 경기, 강원도, 충남 지역의 벼를 수집하여 쌀겨와 현미에서의 $B.$ $cereus$ group을 분리하였으며, 분포분석을 통해 작물의 오염 정도를 알아보았고, biofilm 형성시 특성을 연구하였다. $B.$ $cereus$는 총 26개의 시료 가운데 쌀에서 34.6%, 쌀겨에서 50.0%로 가장 높은 분포도를 나타냈으며, $B.$ $thuringiensis$는 쌀에서 3.9%, 쌀겨에서 23%의 분포를 보였다. 분리된 균주의 biofilm 형성 능력 실험에서는 시간이 지남에 따라 biofilm 형성 정도가 증가하였으며, 표준 균주에 비해 분리 균주가 biofilm 형성 능력이 높은 것으로 나타났다. 또한 biofilm이 형성된 $B.$ $cereus$의 경우 항생제와 항균제 처리에 따른 최소저해농도는 부유 세균에 비해 대체적으로 높은 내성을 나타내는 것으로 확인되었다.

• 한국해안·해양공학회논문집
• /
• 제29권6호
• /
• pp.350-362
• /
• 2017

오일러형 해빈류 모형은 계산된 질량흐름에 파랑질량흐름이 포함되어 있지 않기 때문에 수치모의된 계산결과를 정점 관측결과와 직접 비교할 수 있다. 또한 포물선형 연직분포를 가진 연안류를 재현할 수 있음으로 인해 라그랑지형 해빈류 모형보다 장점이 있다. 그러나 오일러형 해빈류 모형에서 파랑에 의한 응력인 파랑응력이 해빈류 모형에 따라 형태가 달라, 서로 다른 계산 결과가 나타나게 된다. Newberger and Allen(2007)의 파랑응력은 연직방향으로 수심의 함수가 아닌 상수인 반면에 Chun(2012)의 파랑응력은 수심의 함수로 표현된다. 이러한 차이는 해빈류 계산 결과에 직접적인 영향을 미치고 있어 본 논문에서는 이들 파랑응력의 차이를 해석적으로 비교하였다. 각 파랑응력에 대한 해빈류 모형을 Hamilton et al.(2001)의 LSTF(Large-scale Sediment Transport Facility) 수리모형 실험에 적용하여 차이를 비교함으로써 파랑응력항의 차이에 따른 해빈류 계산 결과의 특성을 검토하였다.

• 한국가스학회지
• /
• 제22권5호
• /
• pp.72-78
• /
• 2018

최근 가스안전기기의 동향은 무선 기술의 발전과 수요자의 요구에 따라 무선 가스안전기기에 대한 개발과 연구가 활발히 이루어지고 있다. 무선의 신뢰성에 대한 논란이 제기되고 있지만 무선의 편리성이란 강점으로 가스안전기기에 도입이 확대되고 있으므로 이러한 기기의 안전성과 신뢰성을 검증할 수 있는 합리적인 성능평가 방안이 필요하다. 본 논문은 무선 가스안전기기에 대한 안전성과 신뢰성을 확인하여 기기가 원활하게 확대 보급될 수 있도록 성능평가 장치 설계 제작과 성능평가 방안 제시를 목적으로 한다. 이를 위하여 국내 외 무선 가스안전기기 관련제도를 조사하여 신뢰성과 안전성을 확인하는 기능과 방법을 검토하고 주요기능에 대해 시험평가가 가능한 장치를 제작하며 무선가스안전기기의 신뢰성과 안전성 요구조건을 만족시키는 주요 성능평가 항목(안)과 시험방안을 제시한다.

• 한국디지털정책학회:학술대회논문집
• /
• 한국디지털정책학회 2004년도 International Conference on Digital Policy & Management
• /
• pp.39-53
• /
• 2004

Data production systems are generally very large, distributed and complex systems used for creating advanced (mainly statistical) reports. Typically, data is gathered periodically and then subsequently aggregated and separated during numerous production steps. These production steps are arranged in a specific sequence (workflow or production chain), and can be located worldwide. Today, a need for improving and automating methods of supervision for data production systems has been recognized. Supervision in this context entails planning, monitoring and controlling data production. Two significant approaches are introduced here for improving this supervision. The first is a 'closely-coupledd' approach (meaning direct communication between production jobs and supervisory tool, informing the supervisory tod immediately about delays in production) - based upon traditional production planning methods typically used for manufacturing (goods) and adopted for working with data production. The second is a 'loosely-coupled' approach (meaning no direct communication between supervisory tool and production jobs is used) - having its origins in proven traditional project management. The supervisory tool just enquires continuously the progress of production. In both cases, dates, costs, resources, and system health information is made available to management. production operators and administrators to support a timely and smooth production of periodic data. Both approaches are theoretically described and compared. The main finding is that, both are useful, but in different cases. The main advantages of the closely coupled approach are the large production optimisation potential and a production overview in form of a job execution plan, whereas the loosely coupled method mainly supports unhindered job execution and offers a sophisticated production overview in form of a milestone schedule. Ideas for further research include investigation of other potential approaches and theoretical and practical comparison.

• 한국환경과학회지
• /
• 제16권9호
• /
• pp.1063-1069
• /
• 2007

The present study investigated the causes and intensity of the urban heat island phenomenon by the seasons according to the pattern of land use in Chungju City. Highest temperature and lowest moisture areas of the urban were very similar to the distribution of commercial districts, on the other hand, lowest temperature and highest moisture areas were distributed in manufacturing districts, green zones and the Hoam Lake. If appear at intensity of the distance from the outer circumference of commercial districts, wind direction and the rise of temperature, we could observe the remarkable expansion of high temperature from commercial districts toward residential districts around of downwind in all seasons. In case the effect of the wind was not significant as well, high temperature in commercial districts appeared tendency that a little spread to 1, 2 residential districts around. But checked up the intimate relations between the amount of moving heat and wind, when out of consideration that size of area was not much compared than residential areas of downwind affected by the wind. These phenomenon was relatively obvious in summer, the other side, in spring and autumn appeared a similar tendency.

• 대한치과기공학회지
• /
• 제31권1호
• /
• pp.75-97
• /
• 2009

Objectives: Practice of dental technology poses great potential risk since the manufacturing processes are complex and involve dangerous devices and the students are asked to handle various materials in the casting and processing process. Lacking an understanding of the overall practice process, the beginners of practice are exposed to greater danger due to their unsafe attitudes and poor practice attitudes. This study set out to investigate the students of dental technology for their attitudes toward safety and their practice of safe actions during practice and to provide basic data for safety education to prevent any possible safety incidents during practice. Methodology: The subjects include total 408 dental technology majors in their sophomore and junior year. Based on literature study and previous studies, a structured questionnaire was made, distributed to the subjects right after practice, and gathered on the spot. The questionnaire contained total 60 items, and data were collected from April 20 to May 25, 2006. Results: Collected data were analyzed in frequency and $X(C)^{\sim}$-test using the SPSS 12.0 version. The analysis results show that the students believed that they could prevent safety accidents by following safety rules and guidelines as far as safety attitudes were concerned. However, they did nothing more than paying attention to many practice processes even though they thought they were dangerous. Conclusion: Overall the subjects practiced proper safety actions during practice with significance differences in their behavioral characteristics according to grade, gender and age. The significant differences according to grade seem to derive from safety education before practice, and those according to gender and age have more to do with individual actions and common sense according to gender and age than education. Thus practice teachers need to develop safety education materials for each practice process and provide systematic safety education before practice so that the students can practice safety actions.

• 한국의류학회지
• /
• 제31권9_10
• /
• pp.1442-1452
• /
• 2007

During 40 years, clothing industry which took a charge of a pivotal role to lead Korea's economy development falls in a harsh state to maintain an international competitiveness by means of low wage-based-export and tech-deficit-past competitive advantage. From January first 2005 when the World Trade Organization started that developed countries abolished import quota on textile and apparel products. Therefore, the purpose of this study is to analyze Korea's apparel international market share, grasp Korea's apparel international competitiveness position, and examine the export features to enhance international competitiveness. We targeted members of Korea Apparel Industry Association among the 500's exporters of textile and clothing items in 'The Import and Export Textile Product 2003' Total 70 sheets were used of final data analyzing. Also, the statistical data of WTO wereselected for inquiry about the position of international competitiveness of clothing products made in Korea. First, the comparative analysis of the amount of export and international market share of each country's clothing products to capture the position of Korea's international competitiveness of clothing industry under the statistical data of WTO showed that Korea's international market share has been decreasing since 1989, and ranked in the 19th showing 1.31% in 2004. Second, as concerned with Korea's clothing export features, the experience of clothing companies in Korea was uniformly distributed like less than 10 to 30 and more than 30 years and knitted and woven male and female wears which cost mid price were exported to U.S.A. and Europe and Japan. Export items wereusually manufactured by Original Equipment Manufacturing way and directly exported through an exclusive responsible part for export.