• 한국광학회지
• /
• 제7권3호
• /
• pp.207-212
• /
• 1996

임의의 형태를 갖는 회절격자의 결합계수를 쉽게 계산할 수 있도록 확장된 새로운 층 방법을 제안한다. 기종이 새로운 층 방법은 회절격자 영역의 비유전상구의 종축 방향에 대해서만 평균을 취하여 결합계수를 계산하였지만 확장된 새로운 층 방법은 종축과 횡축 양 방향으로 비유전상수의 평균값을 취하여 새로운 층의 비유전상수로 설정하였다. 따라서 회절격자가 임의의 형태를 가지는 경우 새로운 층 방법에서는 새로이 설정하는 층의 비유전상수 값이 횡축으로 변화하는 함수였지만 확장된 새로운 층 방법에서는 단일 상수 값이어서 결합계수를 쉽계 계산할 수 있다. 이 방법을 사용하여 사다리꼴과 삼각형 형태의 회절격자를 가지는 5층 구조 Distributed Feedback 구조 소자의 결합계수를 계산하였다. 확장된 새로운 층 방법에 의한 결합계수 계산 결과의 정확성 검증을 통하여 사다리꼴과 같은 임의이 형태를 가지는 회절격자의 결합계수 계산에 확장된 새로운 층 방법이 매우 유용함을 보였다.

• Journal of Mechanical Science and Technology
• /
• 제16권12호
• /
• pp.1561-1575
• /
• 2002

A reduced-order linear feedback controller, which is used to control the linear disturbance in two-dimensional plane Poiseuille flow, is applied to a boundary layer flow for stability control. Using model reduction and linear-quadratic-Gaussian/loop-transfer-recovery control synthesis, a distributed controller is designed from the linearized two-dimensional Navier-Stokes equations. This reduced-order controller, requiring only the wall-shear information, is shown to effectively suppress the linear disturbance in boundary layer flow under the uncertainty of Reynolds number. The controller also suppresses the nonlinear disturbance in the boundary layer flow, which would lead to unstable flow regime without control. The flow is relaminarized in the long run. Other effects of the controller on the flow are also discussed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.96-99
• /
• 2005

As the demand of internet networks using backbone communication systems recently increased, the researches on the high-speed wideband optical communication systems are required. For high-speed optical communication systems, asymmetric sampled grating distributed feedback laser diodes (DFB-LDs) are developed and the reliability of DFB-LDs is examined. The reliability of DFB-LDs is performed by monitoring I-V and L-I characteristics and two degradation phenomena related to the electrical characteristics of LDs are observed during the life tests. The first degradation phenomenon by increasing the reverse current is considered as a formation of leakage current path enough to prevent lasing operation in lateral blocking layer near active region of lasers. The second degradation phenomenon by decreasing the forward current is considered as activation of non-radiative Auger recombination process by thermal energy and the second degradation phenomenon is recovered after the off-test period at room temperature Eventually, evaluating the reliability of DFB LDs can allow us to improved the manufacturability in high-volume manufacturing.

• 전기의세계
• /
• 제29권4호
• /
• pp.256-259
• /
• 1980

A singular pertubation theory is applied to obtain an approximate solution for suboptimal control of nuclear reactors with spatially distributed parameters. The inverse of the neutron velocity is regarded as a small perturbing parameter, and the model, adopted for simplicity, is a cylindrically symmetrical reactor whose dynamics are described by the one group diffusion equation with one delayed neutron group. The Helmholtz mode expansion is used for the application of the optimal theory for lumped parameter systems to the spatially distributed parameter systems. An asymptotic expansion of the feedback gain matrix is obtained with construction of the boundary layer correction up to the first order.

• 한국광학회지
• /
• 제14권4호
• /
• pp.454-459
• /
• 2003

단일 모드 광원이 집적된 Mach-Zehnder간섭계형 파장 변환기를 제작하여 세계 최초로 10 Gb/s에서 파장 변환 특성을 확인하였다. 제작된 파장 변환기는 수동 도파로 영역에서의 전파 손실을 줄이기 위해 undoped InP층이 수동 도파로 위에 형성된 새로운 BRS 구조를 사용하였다. 단일 모드 광원으로 손실 결합형 분포 궤환형 반도체 레이저(loss-coupled distributed feedback laser; LC-DFB LD)를 사용하여, 파장 변환기에 있는 반도체 광증폭기의 주입전류가 200 mA까지 측모드 억제율이 30 dB 이상의 값을 나타내었다. 제작된 LC-DFB LD 집적 파장 변환기는 10 Gb/s의 동적 파장 변환 특성 측정 결과, 7 dB 정도의 소광비를 갖는 eye 패턴을 얻을 수 있었으며, power penalty는 $10^{-9}$ bit error rate에서 2.8 dB의 값을 나타내었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.280-281
• /
• 2009

Piezoelectric vibrators can be good replacements of electric motors to excite touch screen of a mobile device owing to small volume and low power consumption. One problem to be solved yet for real application is larger excitation force or moment than available currently. More efficient excitation by a piezoelectric vibrator could be achieved by operating at one of resonance frequencies of the system, which must also be as close as possible to frequency range where index finger is most sensitive and increasing transmission force or moment at that frequency. In this study, dynamic models are derived for the piezoelectric exciter and an adhesive viscoelastic layer, which connect the exciter to the screen. The adhesive layer is modeled as distributed stiffness by considering its geometric shape to relative to the piezoelectric exciter. Then, equations of motion for the piezoelectric exciter and the adhesive layer are derived using Hamilton's principle. Based on this model, dynamic characteristics of the exciter will be designed to maximize the force or moment transmitted onto the screen structure.

• 전자공학회논문지D
• /
• 제34D권7호
• /
• pp.97-104
• /
• 1997

Using the ray optics technique, we derive the analytic expressions of TE mode coupling coefficient for five-layer distributed feedback (DFB) structure devices. We compare the coupling coefficient calculated by the ray optics technique with those calulated by the extended additional layer method (EALM) which may be a most accurate method of calculating the coupling coefficient. The difference between the results of the ray optics technique and those of the EALM is small for most cases of grating depth and forms being practically made. In the case of rectangular gratings, the difference increases as the duty cycle of graing deviates from 0.5. In the case of the trapezoidal grating, the difference increases as the ratio of the top to the period of grating deviates from 0.5 and as the length of the top becomes longer than that of the base. The difference of theree-layer DFB structures is smaller than that of five-layer DFB structures.

• 반도체디스플레이기술학회지
• /
• 제10권4호
• /
• pp.131-138
• /
• 2011

We fabricated distributed feedback InGaAsP/InP laser diodes for optical fiber communication module and characterized the lasing properties in continuous wave operation. The active layer of 7-period InGaAsP(1.127 eV)/InGaAsP(0.954 eV) multi-quantum well structure was grown by the metal-organic chemical vapor deposition. The grating for waveguide was also fabricated by the implementation of the Mach-Zehender holographic method of two laser beams interference of He- Cd laser and the fabricated laser diode has the dimension of the laser length of $400{\mu}m$ and the ridge width of $1.2{\mu}m$. The laser diode shows the threshold current of 3.59 mA, the threshold voltage of 1.059 V. For the room-temperature operation with the current of 13.54 mA and the voltage of 1.12 V, the peak wavelength is about 1309.70 nm and optical power is 13.254 mW.

• 한국재료학회지
• /
• 제13권8호
• /
• pp.485-490
• /
• 2003

We have developed a new way of the constant growth technique to maintain a grating height of originally-etched V-groove of submicron gratings up to 1.5 $\mu\textrm{m}$ thickness by a low pressure metalorganic chemical vapor deposition. The constant growth technique is well performed on two kinds of submicron gratings that made by holography and electron (e)-beam lithography GaAs buffer layer grown on thermally deformed submicron gratings has an important role in recovering the deformed grating profile from sinusoidal to V-shaped by reducing mass transport effects. The thermal deformation effect on submicron gratings made by e-beam lithography is less than that on submicron gratings made by holography. The constant growth technique is an important step to realize complex optoelectronic devices such as one-step grown distributed feedback lasers and two-dimensional photonic crystals.

• 전자공학회논문지D
• /
• 제36D권5호
• /
• pp.88-98
• /
• 1999

레이저의 종축방향으로 회절격자층을 형성하는 위쪽 클래딩 층의 가운데 부분의 굴절률을 양 옆부분과 다르게 하여 유효위상천이 효과를 넓은 영역에서 얻는 refractive index midulated (RIM) DFB 레이저를 제안한다.RIM-DFB 레이저는 SHB 효과를 줄이기 위하여 기존에 제안되었던 회절격자의 주기를 변화시켜 넓은 영역에 걸쳐서 유효 위상 천이를 주는 corrugation pitch modualtion (CPM) 방법과 레이저의 종축 방향으로 결합계수를 달리하여 주는 distributed coupling coefficients (DCC) 방법의 효과를 동시에 얻을 수 있는 실현 가능한 구조이다. 급격한 위상천이가 없기 때문에 광자밀도분포가 균일해져 SHB 효과가 줄어 들게 되며 레이저 공진기 가운데 부분의 결합계수가 양 옆 부분의 결합계수보다 커서 분포결합계수의 효과를 주기 때문에λ/4 위상천이 레이저와 CPM-DFB 레이저에 비해 고출력에서 좋은 단일 모드 특성을 보인다. 그리고, 굴절률이 다른 가운데 부분의 길이가 RIM-DFB 레이저의 동작특성에 미치는 영향에 대하여 연구하였다.