• 한국통신학회논문지
• /
• 제22권12호
• /
• pp.2755-2762
• /
• 1997

기존의 개방형 망관리 시스템은 상당한 기술과 경험이 필요하기 때문에 사용하기가 어려울 뿐만 아니라 관리 업무를 수행하기 위한 복잡한 API(Application Programming Interface) 프토그램이 필요하다. 때문에 망관리 시스템이 지능적이기를 원할수록 어려운 프로그램을 필요로 하였다. 본 연구에서는 분산된 망관리 환경에서 망관리자의 경험과 지식을 규칙으로 표현하여 프로그램을 하지 않으면서도, 망관리 지식을 체계적으로 관리하며, 지능적 망관리가 가능하도록 다중 분산 전문가시스템 구조를 이용한 지능적인 컴퓨더 망관리 시스템을 제안하였다. 망관리를 위한 전문가시스템은 기본적으로 망관리 프로토볼을 이해하고, 이미 정해진 망운영 지침 및 관리방법에 의하여 이를 분석하여 그에 따른 조처와 보고를 수행할 수 있어야 한다. 이를 위하여 프로토콜을 이해하고 분석하는 감시 전문가시스템, 감시 전문가시스템에 의하여 보고된 내용에 따라 고장진단을 하는 고장진단 전문가시스템, 이들을 망전체의 차원에서 관리하는 망관리 전문가시스템 등의 다중 전문가시스템으로 이루어진다.

• 유통과학연구
• /
• 제11권4호
• /
• pp.81-88
• /
• 2013

Purpose - This paper analyzes the influence of the RMB internationalization on the KRW/dollar exchange rate using an autoregressive distributed lag model. Comparing the parameter estimators from the sample period before and after the global financial crisis, we found that the RMB/dollar exchange rate has increasingly become more influential on the KRW/dollar exchange rate. Moreover, for the past several years, the Chinese government has actively utilized the financial service FTA negotiation as a measure for the RMB internationalization. This paper simultaneously considers RMB internationalization and financial service negotiations in the Korean-Chinese FTA. The purpose of this paper is to explicitly suggest a direction for the financial service negotiations in the Korean-Chinese FTA considering the effects of RMB internationalization. Research design, data, and methodology - The research plan of this paper has two parts. First, for an empirical study, this paper uses the daily exchange rate of the U.S. dollar against the currencies of the ASEAN5, Taiwan,and Korea. By using an autoregressive distributed lag model, this paper studies the influence of the change in the RMB/dollar exchange rate on changes in the local currency/dollar exchange rate in seven economies neighboring China. Our sample periods are 06/2005 - 07/2008 and 06/2010 -02/2013. During these periods, China was under the multi-currency basket system. We exempted the period of 08/2008 - 05/2010 from the analysis because there was nearly no RMB/dollar exchange rate fluctuation during those months. Second, after analyzing the recent financial service liberalizations and deregulations in China, we recommend a direction for the financial service negotiations in the Korean-Chinese FTA. In the past several years,the main Chinese financial policy agenda has surrounded the RMB internationalization. Therefore, it is crucial to understand this in the search for strategies for the financial service negotiations in the Korean-Chinese FTA. This paper employs an existing literature survey and examines the FTA protocols in its research methodology. Results and Conclusions - After the global financial crisis, the Chinese government wanted to break away from the dollar influence and pursued independent RMB internationalization in order to continue the growth and stability of its economy. Hence, every neighboring economy of China has been strategically impacted by RMB internationalization. Nevertheless, there is little empirical study on the influence of RMB internationalization on the KRW/dollar exchange rate. This paper is one of the few studies to analyze this problem comprehensively. By using a relatively simple estimation model, we can confirm that the coefficient of the RMB/dollar exchange rate has become more significant, except in the case of Indonesia. Although Korea is not under the multi-currency basket system but under the weakly controlled floating exchange rate system, its coefficient appears as large as that of the ASEAN5. This is the basis of the currency cooperation that has grown from the expansion of trade between the two countries. These empirical results suggest that the Korean government should specifically consider the RMB internationalization in the Korean-Chinese FTA negotiations.

• 대한전자공학회논문지TC
• /
• 제37권5호
• /
• pp.1-9
• /
• 2000

본 논문에서는 이동 무선채널이 레일레이(Rayleigh) 분포된 다중경로 페이딩 채널(multipath fading channel)일 경우에 불완전 전력제어된 DS/CDMA 셀룰라 시스템의 역방향 링크에 대하여, 음영효과와 다중 경로 페이딩을 모두 고려한 확장된 DS/CDMA 블럭킹 확률식(blocking probability formula)을 유도한다. 음영효과(shadowing)만을 고려한 경우와 음영효과와 다중경로 페이딩을 모두 고려한 경우에 대하여 각각 얼랑용량과 등가 채널수를 비교 분석한다. DS/CDMA 블럭킹 확률은 각 사용자에 해당하는 E/sub b(i)//Ⅰ/sub 0/의 중간 값(median value)을 이용하여 얼랑용량과 간섭보정계수를 구하는 분석방법으로 계산한다. 2%의 블럭킹 확률을 가정하면 데이터를 R/sub b/=9.6 kbps에서는 19.97 얼랑, R/sub b/=14.4 kbps에서는 11.67 얼랑으로 음영효과만을 고려한 경우보다 각각 16%와 19%의 용랑이 감소함을 알 수 있다. 또한 다중경로 페이딩의 영향을 무시해서는 안된다는 것을 보이고 DS/CDMA 셀룰라 시스템이 지원할 수 있는 정확한 얼랑용량과 등가채널수를 제공한다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.102-108
• /
• 2009

Fossil power plants firing lower grade coals or equipped with modified system for NOx controls are challenged with maintaining good combustion conditions while maximizing generation and minimizing emissions. In many cases significant derate, availability losses and increase in unburned carbon levels can be attributed to poor combustion conditions as a result of poorly controlled local fuel and air distribution within the boiler furnace. In order to develop a on-line combustion tuning system, field test was conducted at operating power boiler. During the field test the exhaust gases' $O_2$, NOx and CO was monitored by using a spatially distributed monitoring grid located in the boiler's high temperature vestibule and upper convective back-pass region. At these locations, the flue gas flow is still significantly stratified, and air in-leakage is minimal which enables tracing of poor combustion zones to specific burners and over-fire air ports. using these monitored information we can improving combustion at every point within the furnace, therefore the boiler can operate at reduced excess $O_2$ and gas temperature deviation, reduced furnace exit gas temperature levels while also reducing localized hot spots, corrosive gas conditions, slag or clinker formation and UBC. Benefits include improving efficiency, reducing NOx emissions, increasing output and maximizing availability. Discussion concerning the reduction of greenhouse gases is prevalent in the world. When taking a practical approach to addressing this problem, the best way and short-term solution to reduce greenhouse gases on coal-fired power plants is to improve efficiency. From this point of view the real time optimized combustion tuning approach is the most effective and implemented with minimal cost.

• 한국태양에너지학회 논문집
• /
• 제29권5호
• /
• pp.45-52
• /
• 2009

Fossil power plants firing lower grade coals or equipped with modified system for $NO_x$ controls are challenged with maintaining good combustion conditions while maximizing generation and minimizing emissions. In many cases significant derate, availability losses and increase in unburned carbon levels can be attributed to poor combustion conditions as a result of poorly controlled local fuel and air distribution within the boiler furnace. In order to develop a on-line combustion tuning system, field test was conducted at operating power boiler. During the field test the exhaust gases' $O_2,\;NO_x$ and CO was monitored by using a spatially distributed monitoring grid located in the boiler's high temperature vestibule and upper convective rear pass region. At these locations, the flue gas flow is still significantly stratified, and air in-leakage is minimal which enables tracing of poor combustion zones to specific burners and over-fire air ports. using these monitored information we can improving combustion at every point within the furnace, therefore the boiler can operate at reduced excess $O_2$ and gas temperature deviation, reduced furnace exit gas temperature levels while also reducing localized hot spots, corrosive gas conditions, slag or clinker formation and UBC. Benefits include improving efficiency, reducing $NO_x$ emissions, increasing output and maximizing availability. Discussion concerning the reduction of greenhouse gases is prevalent in the world. When taking a practical approach to addressing this problem, the best way and short-term solution to reduce greenhouse gases on coal-fired power plants is to improve efficiency. From this point of view the real time optimized combustion tuning approach is the most effective and implemented with minimal cost.

• 한국초전도ㆍ저온공학회논문지
• /
• 제14권2호
• /
• pp.12-15
• /
• 2012

This paper presents simulation and small-scale experimental tests of a fault current controller. Smart fault controller as proposed and proven conceptually in our previous work is promising technology for the smart power grid where distributed and even stochastic generation sources are prevalent and grid operations are more dynamic. Existing protection schemes simply limiting the fault current to the pre-determined set values may not show best performance and even lead to coordination failures, potentially leading to catastrophic failure. Thus, this paper designs fault current controller with a full bridge thyristor rectifier, embedding a superconducting coil for which the controller is electrically invisible during normal operation because the loss due to the coil is near-zero. When a fault occurs and the resulting current through the superconducting coil exceeds a certain value set intelligently based on the current operating condition of the grid, the magnitude of the fault current is controlled to this desired value by adjusting the firing angles of thyristors such that the overall system integrity is successfully maintained. Detailed time-domain simulations are performed and lab-scale testing circuits are built to demonstrate the desired functionality and efficacy of the proposed fault current controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1297-1300
• /
• 2008

A conventional linear accelerator system requires a flat-topped pulse with less than ${\pm}$ 0.5% ripple to meet the beam energy spread requirements and to improve pulse efficiency of RF systems. A pulse transformer is one of main determinants on the output pulse voltage shape. The pulse transformer was investigated and analyzed with the pulse response characteristics using a simplified equivalent circuit model. The damping factor ${\sigma}$ must be >0.86 to limit the overshoot to less than 0.5% during the flat-top phase. The low leakage inductance and distributed capacitance are often limiting factors to obtain a fast rise time. These parameters are largely controlled by the physical geometry and winding configuration of the transformer. A rise time can be improved by reducing the number of turns, but it produces larger pulse droop and requires a larger core size. By tradeoffs among these parameters, the high-voltage pulse transformer with a pulse width of 10 ${\mu}s$, a rise time of 0.84 ${\mu}s$, and a pulse droop of 2.9% has been designed and fabricated to drive a klystron which has an output voltage of 284 kV, 30-MW peak and 60-kW average RF output power. This paper describes design optimization of a high-voltage pulse transformer for high-power pulsed applications. The experimental results were analyzed and compared with the design. The design and optimal tuning parameter of the system was identified using the model simulation.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.259-264
• /
• 2009

Most of the fossil power plants firing lower grade coals are challenged with maintaining good combustion conditions while maximizing generation and minimizing emissions. In many cases significant derate, availability losses and increase in unburned carbon levels can be attributed to poor combustion conditions as a result of poorly controlled local fuel and air distribution within the boiler furnace. The poor combustion conditions are directly related to the gas flow deviation in upper furnace and convection tube-bank but a less reported issue related to in large-scale oppose wall fired boilers. In order to develop a on-line combustion monitoring system and suggest an alternative heat flux estimation method at tube bank, which is very useful information for boiler design tool and blower optimizing system, field test was conducted at operating power boiler. During the field test the exhaust gases' temperature and tube metal temperature were monitored by using a spatially distributed sensors grid which located in the boiler's high temperature vestibule region. At these locations. the flue gas flow is still significantly stratified, and air in-leakage is minimal which enables tracing of poor combustion zones to specific burners and over-fire air ports. Test results showed that the flue gas monitoring method is more proper than metal temperature distribution monitoring for real time combustion monitoring because tube metal temp. distribution monitoring method is related to so many variables such as flue gas, internal flow unbalance, spray etc., Heat flux estimation at the tube bank with flue gas temp. and metal temp. data can be alternative method when tube drilling type sensor can't able to use.

• 한국컴퓨터정보학회논문지
• /
• 제17권12호
• /
• pp.251-258
• /
• 2012

과거 종이로 기록되던 환자의 의료정보는 점점 현대과학의 눈부신 진화와 발전으로 현재는 종이를 대신하는 전자적 시스템인 전자의무기록시스템 형태로 발전되었다. 또한 병원에서 활용되는 모든 의료정보들이 전자적시스템을 이용하여 활용되고 있는 것이 현실이다. 그러나 과학기술의 발전과 더불어 의료정보의 피해 사례는 계속 증가할 것으로 보인다. 보험사기 예방을 위해 의료정보를 공유해야한다는 보험단체들의 주장, 개인정보를 얻기 위해 금전적 불법거래가 성행되고 있다는 뉴스 등을 접할때면 의료정보 보호에 관한 대책 마련이 절실함을 의미한다. 따라서 의료정보와 관련된 유출상의 문제점을 정확히 파악하는 것은 의료정보 유출의 부작용을 예방하고 의료정보 보호와 미비점을 보완하는 선결과제인 것이다. 따라서 현재의 의료법 및 개인정보보호법제만으로는 의료정보의 표준화와 의료정보보호 등을 규율할 수 없고, 의료정보에서 발생되는 여러 문제들을 보호하기에는 미흡하다고 판단된다. 따라서 본 논문은 미흡한 의료정보관련 법제의 연구를 위한 선결 과제로 의료정보의 유출로 발생될 수 있는 문제점을 파악하는 것이 무엇보다 중요하다고 판단되며, 이에 의료정보의 유출로 인한 문제점을 파악하고 의료정보를 보호할 수 있는 입법방안을 중심으로 연구하고자 한다.

• 자원환경지질
• /
• 제41권4호
• /
• pp.393-403
• /
• 2008

이 연구는 우리나라의 농촌지역에서 유기비료로 살포되는 축산 분뇨가 농경지 지하수의 수질과 오염에 미치는 영향을 시공간적 변화를 중심으로 규명하기 위하여 수행되었다. 연구는 경기도의 한 농경지에서 200길 2월, 4월, 6월, 10월에는 관측정을 통한 지하수위 관측과 함께 지하수질 모니터링을 수행하였다. 그 결과 봄-여름-가을로 이어지는 계절과 축분을 뿌리는 시기에 따라서 지하수의 수질과 오염현상의 변화는 축분을 가장 많이 뿌리는 시기인 4월에 질산성 질소 농도가 가장 높게 나타났다. 그리고 지하수 내 Mn, Fe 등의 농도와 용존 유기물함량(DOC) 등을 모니터링 함으로써 천부 지하수의 산화-환원상태와 대수층 내 미생물의 활성도가 연구부지 지하수 내 질산성 질소의 농도변화에 가장 중요한 요인으로 작용하는 것으로 유추할 수 있다.