• Journal of Information Processing Systems
• /
• v.6 no.4
• /
• pp.481-500
• /
• 2010

The Internet explosion and the increase in crucial web applications such as ebanking and e-commerce, make essential the need for network security tools. One of such tools is an Intrusion detection system which can be classified based on detection approachs as being signature-based or anomaly-based. Even though intrusion detection systems are well defined, their cooperation with each other to detect attacks needs to be addressed. Consequently, a new architecture that allows them to cooperate in detecting attacks is proposed. The architecture uses Software Agents to provide scalability and distributability. It works in two modes: learning and detection. During learning mode, it generates a profile for each individual system using a fuzzy data mining algorithm. During detection mode, each system uses the FuzzyJess to match network traffic against its profile. The architecture was tested against a standard data set produced by MIT's Lincoln Laboratory and the primary results show its efficiency and capability to detect attacks. Finally, two new methods, the memory-window and memoryless-window, were developed for extracting useful parameters from raw packets. The parameters are used as detection metrics.

• Journal of Power Electronics
• /
• v.15 no.1
• /
• pp.256-267
• /
• 2015

Grid-connected transformerless photovoltaic (PV) inverters (TPVIs) are increasingly dominating the market due to their higher efficiency, lower cost, lighter weight, and reduced size when compared to their transformer based counterparts. However, due to the lack of galvanic isolation in the low voltage grid interconnections of these inverters, the PV systems become vulnerable to leakage currents flowing through the grounded star point of the distribution transformer, the earth, and the distributed parasitic capacitance of the PV modules. These leakage currents are prohibitive, since they constitute an issue for safety, reliability, protection coordination, electromagnetic compatibility, and module lifetime. This paper investigates a wide range of multi-kW range power rating TPVI topologies and classifies them in terms of their leakage current attributes. This systematic classification places most topologies under a small number of classes with basic leakage current attributes. Thus, understanding and evaluating these topologies becomes an easy task. In addition, based on these observations, new topologies with reduced leakage current characteristics are proposed in this paper. Furthermore, the important efficiency and cost determining characteristics of converters are studied to allow design engineers to include cost and efficiency as deciding factors in selecting a converter topology for PV applications.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.2
• /
• pp.470-476
• /
• 2000

This paper describes an IP design of a low-power microcontroller using an architecture level design methodology instead of a transistor level. To reduce switching capacitance, the register-toregister data transfer is adopted to frequently used register transfer micro-operations. Also, distributed buffers are proposed to reduce a input data rising edge time. To reduce power consumption without any loss of performance, pipeline processing should be used. In this paper, a 4-stage pipelined datapath being able to process CISC instructions is designed. Designed microcontroller lessens power consumption by 20%. To measure a power consumption, the SYNOPSYS EPIC powermill is used.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.288-291
• /
• 2016

Recently, there has been a lot of researches related to two-dimensional (2D) materials due to their new properties and applications emerging upon 2D confinement. A new type of graphene like two-dimensional layer material, nitrogenated holey two-dimensional structure C2N-h2D, that is possession of evenly distributed holes and nitrogen atoms with proper bandgap has been synthesized. Previous calculation studies already have shown that the variance of the orbital interaction, band structure of few-layer C2N-h2D suggests that interlayer coupling does play an important role in its electronic properties. In this point, using first-principles density functional theory calculation, we here explore the effect of porous embedded iron atom and iron substrate on encapsulated few layer C2N-h2D. We show the atomic structures and the corresponding electronic structures of Fe@C2N to elucidate the effect of iron. Finally, this study demonstrates that embedded iron C2N has AA-stacking as most favorable stacked structure in contrast to pure C2N. In addition, iron substrate modifies its encapsulated C2N from semi-metallic states to metallic state.

• KSBB Journal
• /
• v.10 no.3
• /
• pp.335-342
• /
• 1995

Solid and liquid phase peroxidases were extracted from Chinese cabbage roots by using commercial juicer in order to use peroxidases from agricultural waste for industrial applications. Since peroxidases are distributed into 66% in liquid (juice) and 34% in solid phase (pulp), enzymes from both phases were applied to investigate the enzymatic removal of phenol from waste water. After contacting 150 ppm Phenol solution with liquid phase enzyme (1,800 unit/$\ell$) for 3 hours in a batch stirred reactor, 96% of phenol could be removed through polymerization and precipitation. Also, phenol could be removed from initial 120ppm to 5ppm by applying solid phase enzyme in an air lift reactor ($600 unit/\ell$). Almost equivalent efficiencies of phenol removal were observed between two systems, even though only one third of the enzymes in batch stirred reactor was applied in airlift reactor. The possible reason for this phenomenon is because peroxidases exist as immobilized forms in solid phase.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.237-241
• /
• 2008

Femtocells are cellular access points that connect to a mobile operator's network using residential DSL or cable broadband connections. They have been developed to work with a range of different cellular standards including CDMA, GSM and UMTS. Like legacy base station, the frequency accuracy and phase alignment is necessary for ensuring the quality of service (QoS) for applications such as voice, real-time video, wireless hand-off, and data over a converged access medium at the femtocell. But, the GPS has some problem to be used at the femtocell, because it is difficult to set-up, depends on the satellite condition, and very expensive. So, some techniques are discussed to alternate with the legacy GPS system. NTP, PTP, Synchronous Ethernet use the ethernet to synchronize distributed clocks in packet networks. AGPS support reliable position information than the legacy GPS in poor signal conditions. But, These method also have some problems. So, hybrid timing method like A-GPS+PTP and TV+GPS was developed to make up the weak point of GPS. This paper introduces the each method and compare each other and y propose much better solution for timing synchronization at the Femtocell

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.815-820
• /
• 2007

In this paper, a small internal antenna for dual-band(RFID, PCS) applications is presented. The proposed antenna is a basic PIFA type and has a deformed ground plane under the main radiator. The modified ground plane is spreading the surface current and the antenna miniaturization can be achieved due to the coupling effect. The antenna is manufactured according to the simulation results and the resonance frequency move to low frequency band by 150MHz. And the surface current on the radiator and ground plane is evenly distributed so our suggested antenna can be used for better SAR and HAC performance.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.11
• /
• pp.2671-2678
• /
• 1997

The MHEG-5 standard defines representation of multimedia and hypermedia information. The MHEG-5 can make it possible to interchange and present information between heterogeneous networked environment. Also, it can provide real-time user interaction. MHEG-5 object generating is the essential requirements for the MHEG-5 applications, In this paper, we designed encoding/decoding class library for the MHEG-5 objects. We can use it for the interchange on the network. The designed class library can provide base technology for the MHEG-5 based distributed multimedia and hypermedia services on the networked environment.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.803-803
• /
• 2002

Several environmental problems have occurred and extremely affected throughout the East Asia region. Satellite imageries and spatial information have been used in the applications of environmental and natural hazard management for years. Sharing these data and resources in the community is considered as one of the optimal solution. It would consequently bring cost saving to all participated countries and eventually be beneficial to mankind as a whole. Encouraged by these factors, ASEAN＋3 Satellite Image Archive for Environmental Study project was submitted by Thailand in the 3rd Senior Official Meeting between ASEAN, China, Japan and Korea (SEOM＋3 Meeting) and approved by the SEOM＋3. The main objectives of this project are to share satellite images, information related to natural resources and environmental issues, and to provide data information services to all ASEAN＋3 countries. The proposed system is basically embedded by distributed system. The network of data users, data providers, and the center will be established using the Internet. User can access, navigate, display, and even download some archived contents. Its service site can be generally categorized into two parts, which are environmental related data archive and the Integrated satellite image catalogue. The extension of web based GIS is also planned for future development so that GIS users can conduct some preliminary analysis directly on line. This presentation will indicate scope of work, system, working scenario, and work plan of the project.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.5
• /
• pp.357-362
• /
• 2016

Various species of insects display vivid colors, widely known as 'structural color' due to their optical interference. Morpho butterflies are famous for their brilliant iridescent colors, which arise from the photonic-nanostructures of optical interference on their wings. In this paper, we outline the results of a comparative study of the optical properties of bio-inspired Morpho butterfly structures with the widely known Distributed Bragg Reflector (DBR), conducted using a rigorous coupled-wave analysis (RCWA) method for the two structures. Almost analogous tendencies were observed for both Morpho and DBR structures. With variation in the surrounding media, however, Morpho structures showed an obvious peak shift while no significant changes were observed in DBR, which can be applicable.