• Journal of Information Technology Applications and Management
• /
• v.21 no.2
• /
• pp.31-48
• /
• 2014

The concept of Health Related Quality of Life and its determinants have evolved since the 1980s. Although many researchers have published articles of technology usage in hospitals and the installation of technology based healthcare system, the research about applying the information technology to improve the patients' perceived quality of healthcare services is still limited. In general, services are deeds, processes and performances that are essentially concerns of the consumer. The healthcare service quality depends on tangible factors, such as equipments, facilities, and the quality of hospital staff and also the intangible ones. The main purpose of this work is to establish new model and find out the contribution of information technology to enhance the patients' perceived quality of healthcare service. We attempted to examine the main information technology related factors in 3 aspects, namely quality of information, the technology accessibility and the community that can improve patients' perceived quality of healthcare services. Offline and online questionnaires were used to measure the patients' perceived quality and were distributed to 384 people in 2 countries, Laos and South Korea. A principle component analysis and multiple regressions were used to verify our model. Results show that the use of information technology has partial positive effect on patient-physician interaction in both countries. However, patient knowledge and patient autonomy which are the 2 dimensions of patient-physician interaction has significant positive effect on patients' perceived quality of healthcare service.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.12
• /
• pp.2084-2093
• /
• 2016

It is crucial to predict water temperature for aquatic ecosystem studies and management. In this paper, we first address challenging issues in predicting water temperature in a real time manner and propose a distributed computing model to address such issues. Then, we present an Artificial Neural Network (ANN)-based water temperature prediction model developed for the Soyang River and a cyberinfrastructure system called WT-Agabus to run such prediction models in an automated and real time manner. The ANN model is designed to use only weather forecast data (air temperature and rainfall) that can be obtained by invoking the weather forecasting system at Korea Meteorological Administration (KMA) and therefore can facilitate the automated and real time water temperature prediction. This paper also demonstrates how easily and efficiently the real time prediction can be implemented with the WT-Agabus prototype system.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.277-279
• /
• 2005

The imbalance of energy demand and supply caused by rapid industrialization around the world and the associated environmental issues require and alternative energy source with possible renewable fuels. Political instability and depletion of cruel oils are other factors that cause fluctuation of oil price. Securing a new alternative energy source for the next century became an urgent issue that our nation is confronting with. As a matter of fact, the fuel cell technology can be widely used as next generation energy regardless of regions and climate. Specially, the ability of expansion and quick installation enable one to apply it for distributed power, where the technology is already gaining remarkable attentions for the application. Particularly, leading industrialized nations are focusing on the PEM fuel dell with anticipation that this technology will find their place of applications in the vehicles and homes. In this study, demonstrate the multi physics modeling of a proton exchange membrane(PEM) fuel cell with interdigitated flow field design. The model uses current balances, mass balance(Maxwell-Stefan diffusion for reactant, water and nitrogen gas) and momentum balance(gas flow) to simulate the PEM fuel cell behavior.

• Journal of Digital Contents Society
• /
• v.12 no.3
• /
• pp.309-318
• /
• 2011

The web trend has been flowed from portal site to user created contents site, recently. Therefore, many companies have suggested web program of producing contents for user's convenience. However, web applications that are operated in various web browsers and heterogeneous devices have many problems regarding distribution and management so far. Because of diverse one-source data formats. In this paper, we present an integrative displaying and distributing tool (IDD-Tool) for editing, distributing and managing multimedia contents and environment so that users can work. It is inspected that the tool is widely used in the fields of education, publication, corporations and etc. because a user can participates in contents producing easily in personal customized workplace with IDD-Tool and contents made by IDD-Tool are distributed.

• Geomechanics and Engineering
• /
• v.6 no.3
• /
• pp.249-262
• /
• 2014

Tire chips and tire chips-soil mixtures can be used as alternative fill material in many civil engineering applications. In this study, the potential benefits of using tire chips as lightweight material to improve the bearing capacity and the settlement behavior of sand slope was investigated experimentally. For this aim, a series of direct shear and model loading tests were conducted. In direct shear tests, the effect of contents of the tire chips on the shear strength parameters of sand was investigated. Different mixing ratios of 0, 5, 10, 15 and 20% by volume were used and the optimum mixing ratio was obtained. Then, laboratory model tests were performed on a model strip footing on sand slope reinforced with randomly distributed tire chips. The loading tests were carried out on sand slope with relative density of 65% and the slope angle of $30^{\circ}C$. In the loading tests the percentage of tire chips to sand was taken as same as in direct shear tests. The results indicated that at the same loading level the settlement of strip footing on sand-tire chips mixture was about 30% less than in the case of pure sand. Addition of tire chips to sand increases BCR (bearing capacity ratio) from 1.17 to 1.88 with respect to tire chips content. The maximum BCR is attained at tire chips content of 10%.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.1
• /
• pp.384-398
• /
• 1996

An improved multi-channel Impedance Void Meter (IVM) is developed to measure an area-averaged void fraction. It consists of a main sensor, a reference sensor and a signal processor. The sensor was designed to be flush-mounted to the inner wall of the test section to avoid the flow disturbances. Guard electrodes are used to obtain evenly distributed electrical field in a measuring volume. A reference sensor is also installed to eliminate the drift in void signal caused by the changes in electrical properties of working fluid. The signal processor with three channels is specially designed so as to minimize the inherent error due to the phase difference between channels. As an example of applications, the mean and fluctuating components of void fraction are measured for bubbly and slug flow regime, and it is shown that IVM has good dynamic resolution which is required to investigate the structural developments of bubbly flow and the propagation of void waves in a flow channel.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.01a
• /
• pp.9-13
• /
• 2014

The performance of large scale software applications has been automatically increasing for last few decades under the influence of Moore's law - the number of transistors on a microprocessor roughly doubled every eighteen months. However, on-chip transistors limitations and heating issues led to the emergence of multicore processors. The energy efficient ARM based System-on-Chip (SoC) processors are being considered for future high performance computing systems. In this paper, we present a case study of two widely used parallel programming models i.e. MPI and MapReduce on distributed memory cluster of ARM SoC development boards. The case study application, Black-Scholes option pricing equation, was parallelized and evaluated in terms of power consumption and throughput. The results show that the Hadoop implementation has low instantaneous power consumption that of MPI, but MPI outperforms Hadoop implementation by a factor of 1.46 in terms of total power consumption to execution time ratio.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.11
• /
• pp.1013-1020
• /
• 2004

The hybrid system of gas turbine and fuel cell is expected to produce electricity more efficiently than conventional methods, especially in small power applications such as distributed generation. The solid oxide fuel cell (SOFC) is currently the most promising fuel cell for the hybrid system. To realize the conceptual advantages resulting from the hybridization of gas turbine and fuel cell, optimized construction of the whole system must be the most important. In this study, parametric design analyses for pressurized GT/SOFC systems have been peformed considering probable practical limiting design factors such as turbine inlet temperature, fuel cell operating temperature, temperature rise in the fuel cell and soon. Analyzed systems include various configurations depending on fuel reforming type and fuel supply method.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.4
• /
• pp.177-187
• /
• 2020

Virtualization with hypervisors is one of emerging topics in multicore processors for space. Hypervisors are software layers to make several independent virtualized environments on one processor. Since all hardware resources are virtualized and distributed only by hypervisors, overall performance of processors can be improved by fully utilizing the resources. However at the same time, there are overheads for virtualizing and distributing hardware resources. Satellites are one of hard real time systems, and performance degradation with overheads should be analyzed thoroughly. Previous research on the overheads focused on single core systems. Even the overheads were analyzed in multicore systems, SMP environment was not fully included. This paper builds SMP environment with XtratuM, one of hypervisors for space missions, and analyzes performance degradation with overheads. Two boards of GR712RC with 2 LEON3FT CPUs and GR740 with 4 LEON4 CPUs are used in experiments. On each board, SMP benchmark functions are executed on SMP environment with XtratuM and on that without XtratuM respectively. Results are analyzed to find timing characteristics including overheads. Finally, applicability of the XtratuM to flight software in SMP is also reviewed.

• Journal of the Optical Society of Korea
• /
• v.20 no.6
• /
• pp.722-732
• /
• 2016

A new optical one-time password (OTP) authentication method using digital holography is proposed, which enhances security strength in the authentication system. A challenge-response optical OTP algorithm based on two-factor authentication is presented using two-step phase-shifting digital holography, and two-way authentication is also performed using challenge-response handshake in both directions. Identification (ID), password (PW), and OTP are encrypted with a shared key by applying phase-shifting digital holography, and these encrypted pieces of information are verified by each party by means of the shared key. The encrypted digital holograms are obtained by Fourier-transform holography and are recorded on a CCD with 256 quantized gray-level intensities. Because the intensity pattern of such an encrypted digital hologram is distributed randomly, it guards against a replay attack and results in higher security level. The proposed method has advantages, in that it does not require a time-synchronized OTP, and can be applied to various authentication applications. Computer experiments show that the proposed method is feasible for high-security OTP authentication.