• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.273-278
• /
• 1997

In order to investigate the punch properties of some vegetables-cucumber, radish, garlic, ginger and potato-force, distance, and time were measured with a texturometer, and the correlations between compositions and cell characteristics of samples were characterized. Many reflection and rupture points on the force-distance and distance-time curve were observed, and these points appeared when the cells of sample were resisted and yielded against the applied force. They were big and clear at the slow crosshead speed. The regression analysis for force-time and distance-time to the rupture point showed $R^{2}>0.95$. The rupture time and rupure force were 5.63 sec, 4.88 N in ginger and 4.15 sec, 2.00 N in cucumber. The rupture forces become large values at the fast crosshead speed. As cell sizes were increased, the moisture content and rupture distance were increased, while the viscosity of juice, density, regularity of cell, and slope of force-time were decreased. Rupture force, time and distance were decreased at the large specific gravity of samples. The slopes of distance-time curve were inversely proportional to slope of force-time curve.

• Korean Journal of Materials Research
• /
• v.26 no.11
• /
• pp.644-648
• /
• 2016

In order to examine how the solid-liquid interface responds to temperature variation depending on the materials characteristics, i.e. faceted phase or nonfaceted phase, the moving solid-liquid interface of transparent organic material, as a model substance for metallic materials (pivalic acid, camphene, salol, and camphor-50wt% naphthalene) was observed in-situ. Plots of the interface movement distance against time were obtained. The solid-liquid interface of the nonfaceted phase is atomically rough; it migrates in continuous mode, giving smooth curves of the distance-time plot. This is the case for pivalic acid and camphene. It was expected that the faceted phases would show different types of curves of the distance-time plot because of the atomically smooth solid-liquid interface. However, salol (faceted phase) shows a curve of the distance-time plot as smooth as that of the nonfaceted phases. This indicates that the solid-liquid interface of salol migrates as continuously as that of the nonfaceted phases. This is in contrast with the case of naphthalene, one of the faceted phases, for which the solid-liquid interface migrates in "stop and go" mode, giving a stepwise curve of the distance-time plot.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.5
• /
• pp.15-28
• /
• 1998

Recently may investigations have been studied on the high-speed machining by using machine tools. A CNC machine tool makes some tool path errors caused by software acceleration/deceleration. The faster a cutting feedrate is, the bigger the tool path errors are. Some known methods reduce these kinds of errors, but they make the total cutting time increased. This paper presents a feed-forward algorithm that can be generated by distorting the original tool path, and reduces the tool path errors and the total cutting time. The algorithm to generate a new tool path is represented as following; 1)calculating each distance of software acceleration/deceleration between two adjacent blocks, 2) estimating the distorted distance which is the adjacent-ratio-constant(k1, k2) multiply the distance of software acceleration/deceleration, 3) generating a 3-degree Bezier curve approximating the distorted tool path, 4) symmetrically transforming the Bezier curve about the intersection point between two blocks, and 5) connecting the transformed Bezier curve with the original tool path. The algorithm is applied to FANUC 0M. The study is to promote the high-precision machining and to reduce the total cutting time.

• The Korean Journal of Food And Nutrition
• /
• v.9 no.4
• /
• pp.466-471
• /
• 1996

In order to investigate the compression characteristics on the some vegetables-cucumber, garlic, ginger, potato, and radish-compression force, distance, and time were measured with a Struct-O-Graph and correlations between them were investigated. Force-distance and distance-time curves were showed simply and reflection points were showed rarely. The time to rupture point was long of 11.7sec at the compression speed of 60mm/min and of 6.16sec at the compression speed of 120mm/min in potato, and short of 9.65, 4.55sec at the different compression speed in garlic, respectively. The rupture force was large of 16.64~20.00N at the different compression speed in potato and radish, and the sample at rupture point was showed crushing behavior under probe. These phenomena were suggested because compression strength of sample was different. In the result of regression analysis for force-time and distance-time to the rupture point, the correlation coefficients were above 0.96, and difference of among samples was small. The slopes of force-time were large of 1.772~3.385 in cucumber and small of 1.743~3.338 in potato, and the slopes of distance-time were obtained with reverse results.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.405-410
• /
• 2001

In this paper, a new parametric curve interpolator is proposed based on a 3D(3-dimensional) NURBS curve. A free curve is generally divided into small linear segments or circular arcs in CNC machining. The method has caused to a command error, the limitation of machining speed, and the irregular machining surface. The proposed real-time 3D NURBS interpolator continuously generates a linear segment within the range of allowable acceleration/deceleration in the motion controller. Therefore, the algorithm calculates the curvature and the remained distance of a command curve for the smoothing machining. It is expected to attaining high speed and high precision machining in CNC Machine Tool.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.4
• /
• pp.709-714
• /
• 2017

The curved panel is widely used for display of TVs and smart phones. This paper proposes a new auto-focusing method for curved panel inspection system. Since the distance between the camera and the panel varies with the curve position, the camera should change its focus at every inspection time. In order to reduce the focusing time, we propose an effective focusing method that considers the mathematical model of panel curve. The Lagrange polynomial equation is applied to modeling the panel curve. The foci of initial three points are used to get the curve equation, and the other foci are calculated automatically from the curve equation. The experiment result shows that the proposed method can reduce the focusing time.

• The KIPS Transactions:PartD
• /
• v.18D no.5
• /
• pp.323-328
• /
• 2011

For content-based image retrieval, the earth mover's distance and the optimal color composition distance are proposed to measure the dissimilarity. Although providing good retrieval results, both methods are too time-consuming to be used in a large image database. To solve the problem, we propose a new distance function that calculates an approximate earth mover's distance in linear time. To calculate the dissimilarity in linear time, the proposed approach employs the space-filling curve. We have performed extensive experiments to show the effectiveness and efficiency of the proposed approach. The results reveal that our approach achieves almost the same results with the EMD in linear time.

• Phonetics and Speech Sciences
• /
• v.6 no.3
• /
• pp.131-138
• /
• 2014

A close-copy stylization of intonation curve was used for an acoustical analysis of emotional speech. For the analysis, 408 utterances of five emotions (happiness, anger, fear, neutral and sadness) were processed to extract acoustical feature values. The results show that certain pitch point features (pitch point movement time and pitch point distance within a sentence) and sentence level features (pitch range of a final pitch point, pitch range of a sentence and pitch slope of a sentence) are affected by emotions. Pitch point movement time, pitch point distance within a sentence and pitch slope of a sentence show no significant difference between male and female participants. The emotions with high arousal (happiness and anger) are consistently distinguished from the emotion with low arousal (sadness) in terms of these acoustical features. Emotions with higher arousal show steeper pitch slope of a sentence. They have steeper pitch slope at the end of a sentence. They also show wider pitch range of a sentence. The acoustical analysis in this study implies the possibility that the measurement of these acoustical features can be used to cluster and identify emotions of speech.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.69-74
• /
• 2011

In the curving detection method by using an accelerometer, the ride comfort in the first car is worse than one in the others due to spend the time to calculate the tilting command and drive the tilting mechanism after entering in the curve. In order to enhance the ride comfort in the first car, the preditive curve detection method which predicts the distance from a train to the starting point of curve by using the GPS, Tachometer, Ground balise and position DB for track. In this study, we predicted and evaluated the ride comfort for predictive curve detection method in transient curves according to the shape and dimension of transient curve and the various driving speed. Also, we predicted the improvement of the ride comfort for predictive curve detection method by comparing with the result of the ride comfort for predictive curve detection method and for curve detection method using an accelerometer in the short transient curve.

• Journal of the Korean Society of Safety
• /
• v.18 no.1
• /
• pp.8-13
• /
• 2003

This study proposes integrity evaluation method of weld zone in rails using high precision distance amplitude characteristics curve(DACC) and ultrasonic signals. For these purposes, the ultrasonic signals for defects(porosity and crack) of weld zone in rails are acquired in the type of time series data and echo strength. 6 lines in the DACC indicated damage evaluation standard of weld zone in rails. The aquired ultrasonic signals agree fairly well with the mesured results of reference block and sensitivity block(defect location, beam propagation distance, echo strength, etc). The proposed high precision DACC in this study can be used for integrity evaluation of weld zone in rails.