• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.127-129
• /
• 2001

This paper discusses how to implement and verify a software relaying model which is added to RTDS model library and is then subjected to the same outputs as the actual relay.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.1864-1872
• /
• 2014

Maloperation of protective relays is one of the major causes for cascading tripping in WANS. Another line trip followed by a previous line trip may occur due to overloading of the line, because of the load redistribution or unwanted trip of a backup relay due to change in the flow of fault current. Evaluation of each line is required by considering both of these effects. A new index named Line Security Index (LSI) is proposed in this paper which combines both Vulnerability Index (VI) and Protectability Index (PI) to completely evaluate the security of individual lines and their importance in the power grid. Computer simulations have been performed on the Korean power grid data to establish the feasibility of the proposed idea.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.440-442
• /
• 2000

This paper describes the digital distance algorithm in case of combined transmission line connected with overhead line and underground cable. Actually as fault is occurred in cable, it results in the complicated phenomena due to the several kind of grounding method in the sheath of cable. Accordingly the impedance. Therefore the correct impedance calculation algorithm is requested in combined transmission line to avoid the wrong trip of relay. This paper presents the development result of impedance calculation algorithm In such transmission line.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.36-38
• /
• 1994

A novel UHS relaying algorithm using reflection coefficients estimation is proposed. Based on a travelling ware approach the algorithm can determine the fault location in a travelling time of the protected lone. The discrimation of the reflected wave from others is possible observing the difference of two coefficients. The algorithm is tested using results determined by EMTP.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.04a
• /
• pp.824-825
• /
• 2010

최근 RFID 태그들이 근접 인증(proximity authentication)을 위해 사용자의 위치나 상황을 이용하여 통신하기 때문에 위치 기반 공격인 중계 공격(relay attack)에 매우 취약함이 증명되었다. 이러한 중계 공격들을 방지하기 위해 리더와 태그사이의 메시지 송수신 왕복 시간을 측정하는 경계 결정(distance-bounding) 프로토콜이 한 해결책으로 연구되고 있다. 2008년에 Munilla와 Peinado는 Hancke-Kuhn이 제안한 프로토콜을 수정하여 보이드(void) 기법을 적용한 RFID 경계 결정 프로토콜을 제안하였다. 공격자에게 n번의 왕복에서 $(5/8)^n$으로 성공 확률을 감소시켰지만, 저비용 수동형 태그에서 많은 통신량과 저장 공간을 요구하므로 비효율적이다. 따라서 본 논문에서는 태그측의 해쉬 함수 연산량을 줄이고, 적은 저장 공간을 요구함으로써 저비용 RFID 시스템에 적합한 효율적인 RFID 경계 결정 프로토콜을 제안한다.

• Journal of Communications and Networks
• /
• v.12 no.2
• /
• pp.103-113
• /
• 2010

In this paper, a tradeoff between the total energy consumption-per-bit and the end-to-end rate under spatial reuse in wireless multi-hop network is developed and analyzed. The end-to-end rate of the network is the number of information bits transmitted (end-to-end) per channel use by any node in the network that is forwarding the data. In order to increase the bandwidth efficiency, spatial reuse is considered whereby simultaneous relay transmissions are allowed provided there is a minimum separation between such transmitters. The total energy consumption-per-bit includes the energy transmitted and the energy consumed by the receiver to process (demodulate and decoder) the received signal. The total energy consumption-per-bit is normalized by the distance between a source-destination pair in order to be consistent with a direct (single-hop) communication network. Lower bounds on this energy-bandwidth tradeoff are analyzed using convex optimization methods. For a given location of relays, it is shown that the total energy consumption-per-bit is minimized by optimally selecting the end-to-end rate. It is also demonstrated that spatial reuse can improve the bandwidth efficiency for a given total energy consumption-per-bit. However, at the rate that minimizes the total energy consumption-per-bit, spatial reuse does not provide lower energy consumption-per-bit compared to the case without spatial reuse. This is because spatial reuse requires more receiver energy consumption at a given end-to-end rate. Such degraded energy efficiency can be compensated by varying the minimum separation of hops between simultaneous transmitters. In the case of equi-spaced relays, analytical results for the energy-bandwidth tradeoff are provided and it is shown that the minimum energy consumption-per-bit decreases linearly with the end-to-end distance.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.10
• /
• pp.1364-1370
• /
• 2014

Power system fault analysis has been based on symmetrical component method, which describes power system elements by positive, negative and zero sequence impedance. Obtaining accurate line impedances as possible are very important for estimating fault current magnitude and setting distance relay accurately. Especially, accurate calculation of zero sequence impedance is important because most of transmission line faults are line-to-ground faults, not balanced three-phase fault. Since KEPCO has started measuring of transmission line impedance at 2005, it has been revealed that the measured and calculated line impedances are well agreed within reasonable accuracy. In case of underground transmission lines, however, large discrepancies in zero sequence impedance were observed occasionally. Since zero sequence impedance is an important input data for distance relay to locate faulted point correctly, it is urgently required to analyze, detect and consider countermeasures to the source of these discrepancies. In this paper, development of pre/post processor to ATP (Alternative Transient Program) version of EMTP (Electro-Magnetic Transient Program) for sequence impedance calculation was described. With the developed processor ATP-cable, effects of ground resistance and ECC (Earth Continuity Conductor) on sequence impedance were analyzed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.4
• /
• pp.17-24
• /
• 2009

This paper deals with the cancellation performance of loop back interference signal in the case of multihop relay of 16-QAM received signal at the USN radio network. For this, it is necessary to the exchange of information with long distance located station by means of the relay function between the node in the USN environment. In the relay node, the loop-back interference signal which the retransmitting signal is feedback to the receiver side due to the antenna of transmitter and receiver are co-used or very colsely located or using the nonlinear device. Due to this signal, the performance of USN system are degraded which are using the limited resource of frequency and power. For improve this, it is necessary to applying the adaptive signal processing algorithm in order to cancellating the unwanted loop-back interference signal at the frontend of receiver in relaying node, we can get the better system and multi hop performance. In the adaptive signal processing, we considered the 16-QAM signal which has a good spectral efficiency, firstly, than, the QR-Array RLS algorithm was used that has a fairly good convergence property and the solving the finite length problem in the H/W implementation. Finaly, we confirmed that the good elimination performanc was confirmed by computer simulation in the learing cuved and received signal constellation compared to the conventional RLS.

• Journal of Advanced Navigation Technology
• /
• v.12 no.6
• /
• pp.634-639
• /
• 2008

In mobile communication networks, the main power consumption is due to the actual transmissions power. Therefore, power efficiency network structures have gained considerable importance in mobile multi-hop systems and networks in recent years. In this paper, the performance of mobile multi-hop wireless system with M-QAM signal and forward error control (FEC) technique are analyzed The FEC technique uses extra processing power related to encoding and decoding, it is need complex functions to be built into the communication node. The probability of receiving a correct bit and codeword for relaying a data frame over h hop relay station to the final station is evaluated as a function of channel parameter and number of hops, and the distance between the different station.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.7
• /
• pp.2936-2951
• /
• 2016

An emerging satellite technology, Operationally Responsive Space (ORS) is expected to provide a fast and flexible solution for emergency response, such as target tracking, dense earth observation, communicate relaying and so on. To realize large distance transmission, we propose the use of available relay satellites as relay nodes. Accordingly, we apply software defined network (SDN) technology to ORS networks. We additionally propose a satellite network architecture refered to as the SDN-based ORS-Satellite (Sat) networking scheme (SDOS). To overcome the issures of node failures and dynamic topology changes of satellite networks, we combine centralized and distributed routing mechanisms and propose a fast recovery routing algorithm (FRA) for SDOS. In this routing method, we use centralized routing as the base mode.The distributed opportunistic routing starts when node failures or congestion occur. The performance of the proposed routing method was validated through extensive computer simulations.The results demonstrate that the method is effective in terms of resoving low end-to-end delay, jitter and packet drops.