• 구강회복응용과학지
• /
• 제31권3호
• /
• pp.186-194
• /
• 2015

목적: 임플란트 위치와 길이가 하악 후방연장 가철성 국소의치(DERPD)와 연관된 임플란트의 응력 분포와 변위에 미치는 영향을 알아보는 것이다. 연구 재료 및 방법: #35, 36, 37이 소실된 시상절단면의 후방연장모형과 가철성 국소의치를 기본모형으로 사용했다. NX 9.0으로 7개의 모델을 디자인했다. 모델 A, B, C에서 각각 11, 6, 4 mm 길이의 임플란트가 #37 인공치 하방에 위치되었다. 모델 D, E, F에서 각각 11, 6, 4 mm의 임플란트가 #36 인공치 하방에 위치되었다. 모델 G는 임플란트가 없었다. 수직하중(250 N)을 #36의 중심와에 가했고, 유한요소 분석프로그램을 이용해 von Mises stress와 변위를 관찰했다. 결과: #37에 위치한 임플란트는 #36에 위치한 것과 비교시 주변골에 더 낮은 응력집중도를, #36에 위치한 임플란트는 #37에 위치한 것보다 더 적은 변위를 보였다. 결론: 임플란트 지지형 가철성 국소의치에서 후방부에 위치한 임플란트는 전방부에서보다 더 이점을 가지며, 길이가 더 긴 임플란트의 사용은 응력분산을 위해서 중요하다.

• 대한치과보철학회지
• /
• 제56권4호
• /
• pp.375-383
• /
• 2018

완전 무치악 환자에서 임플란트를 이용한 보철 수복을 계획하는 경우 임상의는 많은 어려움과 직면하게 된다. 임플란트를 이용한 고정식 보철물로 수복하려는 경우 높은 치료 비용과 장기간의 치료 기간뿐만 아니라 고도로 흡수된 치조골로 인해 추가적인 수술을 동반해야 하는 경우가 많다. 또한 임플란트 피개의치 제작 시에는 수복물을 위한 악간 공간의 부족이 문제가 될 수 있다. 본 연구에서는 최근 연구되고 있는 임플란트를 지대치로 이용한 가철성 수복 증례의 하나로, 상악 완전 무치악 환자에서 전치부의 소수 임플란트 식립 후 이를 지대치로 하는 후방 연장 국소의치 수복을 수행하였다. 이는 치조골 이식 등의 부가적인 수술 가능성을 줄여 치료 기간을 단축시키며, 고령의 환자에게도 비교적 받아들이기 쉬운 치료법이 될 수 있다. 본 증례에서 이를 이용하여 환자에게 기존의 보철물 양식과 유사한 보철 수복을 제공하여 빠른 적응과 저작 효율 및 심미성을 회복하였으며, 만족할만한 치료 결과를 보여주었다.

• 대한치과보철학회지
• /
• 제30권1호
• /
• pp.25-42
• /
• 1992

The purpose of this study was to analyze the magnitude and distribution of stress using a photoelastic model from a unilateral distal extention removable partial dentures with five kinds of the direct retainers, that is, the bilaterally designed bar clasp of the cross-arch lingual bar and the unilaterally designed bar clasp, circumferential clasp, mini-Dalbo attachment, and telescope retainer. A photoelastic model for mandible was made of the epoxy resin(PL-1) and hardner (PLH-1) with the acrylic resin teeth used and was coated with plastic cement-1 at the lingual surface of the model, and then five kinds of removable partial dentures were set, A unilateral vertical load of about 16Kg was applied on the first molar and the stress pattern of the photoelastic model under each condition was analyzed by the reflective circular polariscope. The following results were obtained: 1. The conventional removable partial denture with the bilaterally cross arch lingual bar produced the most favorable stress distribution on the residual ridge and supporting structure of abutment teeth than the unilaterally designed removable partial dentures. 2. The unilaterally designed removable partial denture with the bar clasp produced the stress distribution on the residual ridge, except sligtly higher stress concentration on the supporting structure of the abutment teeth, similar to the conventional removable partial denture with the bilaterally designed cross arch lingual bar. 3. On the unilaterally designed removable partial dentures, the bar clasp produced greater stress distribution on the residual ridge and supporting structure of the abutment teeth than the circumferential clasp. 4. On the unilaterally designed removable partial dentures, the mimi-Dalbo attachment produced relatively higher stress concentration on the residual ridge, but produced lesser stress concentration on the supporting structure of the abutment teeth than the other direct retainers. 5. On the unilaterally designed removable partial dentures, the telescope retainer produced uniform stress distribution on the residual ridge, but produced higher stress concentration at the root apex of the terminal abutment tooth than the other direct retainers. 6. On the unilaterally designed removable partial dentures the circumferential clasp and telescope retainer produced slightly higher stress concentration on the residual ridge and supporting structure of the abutment teeth than the bar clasp and mini- Dalbo attachment.

• 대한치과보철학회지
• /
• 제36권6호
• /
• pp.878-887
• /
• 1998

Although attachments have been utilized for a retainer of removable prostheses during several decades, there is little information on the force distribution by the attachments. This study was undertaken to evaluate the stress patterns developed by partial dentures employing rigid attachments on the supporting structures. Four types of the mandibular removable partial dentures were designed depending upon the position of the rigid attachment and the existency of lingual bracing. Under 100N of vertical and 25N of lateral loads on the 1st and 2nd lower molar of partial denture, stress distribution patterns and displacement were analysed with three dimensional finite element method by ANSYS version 5.3. 1. The highest stresses were concentrated on the distal alveolar crest of posterior abutment and the second stresses on the apical region of posterior abutment in the models. 2. The greatest displacement were shown on the distal alveolar crest of posterior abutment and the second displacement on the distal alveolar crest of anterior abutment in the models. 3. There was little difference between the models with intraoral attachment and those with extracoronal attachment. 4. There was little difference between the models with and without the lingual bracing.

• 대한치과의사협회지
• /
• 제54권12호
• /
• pp.996-1023
• /
• 2016

There are many kinds of maintenance care services for removable denture patient. Adjustment of the denture base and occlusion should be performed regularly not only for pain relief but also for maintaining the denture function. Direct and indirect relining are needed frequently in specific cases including mandibular distal extension case or non-symmetric residual teeth situation. Surface treatments for metal and resin are essential in the relining procedure. Clinical process for the denture repair is similar to indirect relining which needs inter-occlusal registration. Especially, the peridontal maintenance care and caries prevention are most important way to preserve the abutment teeth in partial edentulism. Moreover, the caring method for the denture and the tissue should be instructed to the denture patient.

• 대한치과보철학회지
• /
• 제30권3호
• /
• pp.379-400
• /
• 1992

The purpose of this study was to analyze the magnitude and distribution of stress using a photoelastic model from the mandibular distal extension removable partial dentures with the mesial or distal placement of the occlusal rest and the mesial or distal connection in the back-action clasp with the five various designs of the back-action clasp, that is, the mesial connection and the distal rest, the distal connection and mesial rest, the mesial connection and mesial rest, the distal connection and the mesial and distal rest, and the mesial connection, and the mesial and distal rest. A photoelastic model was made of the epoxy resin(PC-1) and the hardner(PLH-1) with the acrylic resin teeth used and was coated with the plastic cement-1 at the lingual surface of the model and then five kinds of the removable partial dentures on the photoelastic model were set. A unilateral vertical load of 12.5 kg was applied on the central fossa of the first molar with the use of specially designed loading device and the pattern and distribution of the stress of the photoelastic model under each condition was analyzed by the reflective circular polariscope. The following results were obtained. 1. In the back-action clasp with the mesial connection and mesial rest of the case 3, the effect of the stress distribution was the most favorable. 2. In the back-action clasp with the mesial and distal rest, of the case 4 and 5, the stress distribution was more greatly showed in the terminal abutment. 3. Generally, the stress distribution was more favarable in the mesial connection than in the distal connection. 4. In the back-action clasp with the mesial connection of the case 1, 3 and 5, the stress distribution was the most favorable in the mesial rest.

• 대한치과보철학회지
• /
• 제56권4호
• /
• pp.323-329
• /
• 2018

후방 무치악 부위를 수복하는데 있어서 선택할 수 있는 전통적인 치료방법으로는 가철성 국소의치와 임플란트 고정성 보철물이 있다. 최근, 환자의 전신 건강과 심미적 요구사항, 치료 비용, 잔존 치조골 상태 등을 고려하여, 두가지 치료가 결합된 임플란트 융합 국소의치(implant assisted RPD)개념이 이용되고 있다. 임플란트 융합 국소의치는 치조골 결손부가 큰 경우나, 생역학적으로 불리한 경우에 전통적인 가철성 국소의치보다 유지력과 안정성을 증진시킬 수 있으며 심미적이라는 장점이 있다. 또한 치조골 양이 상대적으로 많은 부위에 전략적으로 임플란트를 식립하여 전통적인 국소의치 디자인의 한계를 개선할 수 있을 뿐 아니라, 다수의 임플란트 식립을 통한 고정성 보철물에 비해 환자의 수술 부담을 줄여줄 수 있으며, 비용 절감 효과도 기대할 수 있다. 본 증례의 환자는 하악 양측 소구치부에 단일 임플란트를 식립하여, 임플란트 고정성 보철물을 지대치로 하는 양측성 후방연장 국소의치를 제작하여 치료를 진행하였다. 최종 보철물 장착 후 환자는 저작 기능 및 심미에 대해 만족도를 나타내었다. 이후 1년 이상 주기적인 관찰을 통해 예후를 관찰 중이다. 하악 부분 무치악 환자에서 임플란트를 이용한 가철성 국소의치 수복을 통해 증진된 지지와 안정을 얻었기에 이를 보고하는 바이다.

• 구강회복응용과학지
• /
• 제36권2호
• /
• pp.121-127
• /
• 2020

상악 무치악 환자에서 치료 방법을 결정하는데 있어 생역학적 고려사항과 함께 전치부 치아에 대한 환자의 심미적 요구도 고려될 수 있다. 이 증례 보고는 전치부의 임플란트 고정성 보철물과 구치부의 후방 연장 가철성 국소의치로 구강 기능이 회복된 상악 무치악 환자의 10년 동안 임상 결과를 기술하고 있다. 상악 전방에 임플란트 고정성 보철물로 4개의 임플란트를 연결고정 하였으며 후방에 가공선 유지장치를 가진 가철성 국소의치가 장착되었다. 하악 무치악은 임플란트 피개의치로 수복되었다. 경과 관찰 기간 동안 고정성 보철물의 인공치아와 전장 레진의 변색, 사고로 인한 보철물 파절 이외에 임플란트 및 국소의치 관련된 기계적, 기계적 생물학적 주요 합병증은 관찰되지 않았다.

• 대한치과보철학회지
• /
• 제38권1호
• /
• pp.59-72
• /
• 2000

This study was performed to investigate the effects of tooth mobility and design of the direct retainer on the stress of supporting tissues in distal extension removable partial denture. Tooth mobility was simulated and four different types of direct retainer such as Alters clasp, I-bar clasp, wrought wire clasp, and Dalbo attachment were designed and stress on the support-ing tissues were measured and analyzed with straingauge method. The following conclusions were drawn from this study. 1. The stress revealed at the lingual side of alveolar bone of the abutment tooth in edentulous area was the largest. 2. The stress at the lingual side of alveolar bone of the abutment tooth in edentulous area was increased according to the increase of tooth mobility in I-bar clasp and Dalbo attachment. 3. The stress at the residual ridge crest was the great in Dalbo attachment on mobility 0, in I-bar clasp on mobility 1, and in wrought wire clasp on mobility 2. 4. There was little changes of stress according to the increase of tooth mobility at buccal and lingual side of the residual ridge crest and around the abutment teeth in dentulous area.

• 대한치과보철학회지
• /
• 제23권1호
• /
• pp.97-112
• /
• 1985

The purpose of this study was to evaluate the stress patterns developed in supporting structures by removable partial denture with attachment retainers. The attachments tested were Dalbo(miniature) attachment, resilient Ceka attachment, rigid Ceka attachment, precision and sleeve attachment, and R.P.I. clasp as a contrast. 3-dimensional photoelastic stress analysis was used to record the isochromatic and isoclinic fringe patterns and to calculate principal stress components at measuring points. The results showed that: 1. The maximum compressive stress on residual ridge was produced under the loading point with Dalbo and resilient Ceka attachment, distal to the loading point with rigid Ceka and precision and sleeve attachment, and mesial to the loading point with R.P.I. clasp. 2. The Dalbo attachment produced the most stress on residual ridge, and the least stress on abutment teeth. and resilient Ceka attachment showed favorable stress distribution. 3. Rigid Ceka attachment produced higher compressive stress on buccal. alveolar crest, and precision and sleeve attachment produced higher compressive stress on distal alvelolar crest and mesial surface of the root apex in abutment teeth. 4. R.P.I. clasp produced higher compressive stress on mesial alveolar crest.