• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.63-66
• /
• 2006

A long term deactivation study was carried out with commercial MEA provided by Hyundai Motor Co. The deactivation phenomena were observed only at high voltage region where there is no diffusion-limited reaction. A rapid deactivation was observed up to 40h owing to the sintering of Pt particles. This was followed a gradual increase in the activity up to 300 h, which is probably caused by improvement in the electrode properties in the presence of current during the reaction. After 300 h, monotonic decrease in the activity was observed owing to dissolution of Pt particles especially in the cathode. The presence oxygen is the cause of oxidation and dissolution of Pt. The dissolution rate can be somewhat retarded by generation of current, which reduces Pt ion back to Pt in the cathode.

• Journal of Powder Materials
• /
• v.30 no.1
• /
• pp.47-52
• /
• 2023

The purpose of this study is to develop and evaluate amorphous spray-dried microparticles (SDM) containing levosulpiride to increase its solubility. SDM are prepared via solvent evaporation using polyvinylpyrrolidone (PVP) as the water-soluble polymer and Cremophor RH40 as the surfactant. The SDM is prepared by varying the amounts of PVP and Cremophor RH40, and its physicochemical properties, solubility, and dissolution are confirmed. All levosulpiride-loaded SDMs converted the crystalline drug into an amorphous form, significantly improving drug solubility and dissolution compared with the drug alone. SDM consisting of drug/PVP/Cremophor RH40 in a weight ratio of 5:10:3, with increased solubility (720 ± 36 vs. 1822 ± 51 ㎍/mL) and dissolution rate (10.3 ± 2.2 vs. 92.6 ± 6.0%) compared with drug alone, shows potential as a commercial drug for improved oral bioavailability of levosulpiride.

• Journal of Pharmaceutical Investigation
• /
• v.18 no.1
• /
• pp.5-8
• /
• 1988

Physical properties of oral adhesive tablets prepared with four kinds of gums for topical or systemic drug delivery were investigated. Oral adhesive tablets containing 5mg of brilliant blue(BB) were prepared from direct compression. Viscosity of 2% gum solutions, water absorption, fracture resistance, stickiness of tablets, and dissolution of BB in pH 6.8 dissolution medium were tested. Acacia showed good stickiness and fracture resistance, and tragacanth showed good retarding effect on the release of BB from tablets. Therefore, tablets with varing ratios of acacia and tragacanth were prepared and their physical properties were examined. In conclusion, it was possible to obtain some adequate properties by compounding acacia and tragacanth.

• Corrosion Science and Technology
• /
• v.7 no.4
• /
• pp.237-242
• /
• 2008

Physical properties of water, such as dielectric constant and ionic product, significantly vary with the density of water. In the supercritical conditions, since density of water widely varies with pressure, pressure has a strong influence on physical properties of water. Dielectric constant represents a character of water as a solvent, which determines solubility of an inorganic compound including metal oxides. Dissociation equilibrium of an acid is also strongly dependent on water density. Dissociation constant of acid rises with increased density of water, resulting in drop of pH. Density of water and the density-related physical properties of water, therefore, are the major governing factors of corrosion and environmentally assisted cracking of metals in supercritical aqueous solutions. This paper discusses importance of "physical properties of water" in understanding corrosion and cracking behavior of alloys in supercritical water environments, based on experimental data and estimated solubility of metal oxides. It has been pointed out that the water density can have significant effects on stress corrosion cracking (SCC) susceptibility of metals in supercritical water, when dissolution of metal plays the key role in the cracking phenomena.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.2
• /
• pp.144-148
• /
• 2005

At the previous papers, we showed that ${K_2}O$-CaO-${P_2}{O_5}$ glasses had a solubility in air so that they could be used for glass fertilizer. In this work, we fabricated the Eco-glass fertilizer containing trace elements of B, Mg, Zn, Fe, Cu, Co, Mo, the needed micronutrients for plants to grow, by a melt-quenching process. The dissolution properties in these glasses were investigated with a pH meter and an ICP analyzer. The trace elements doped glasses showed similar behavior in dissolutions and stability properties with the mother glass without containing trace elements. In addition, the dissolution amount of each trace elements depends on the mother glass composition and the quantity of each trace elements, which determine the dissolving velocity of chemical elements.

• KSBB Journal
• /
• v.26 no.3
• /
• pp.217-222
• /
• 2011

Itraconazole is a triazole antifungal agent to inhibit most fungal pathogens. To improve the oral absorption and dissolution of poorly water-soluble itraconazole, microsponge system composed of $Eudragit^{(R)}$ E100 and polyvinyl alcohol(PVA) formulated by quasi-emulsion solvent diffusion method, and its physicochemical properties and pharmacokinetic parameters of itraconazole were studied. The microsponge of itraconazole were discrete free flowing micro sized particles with perforated orange peel like morphology as visualized by scanning electron microscope (SEM). Results showed that the drug loading efficiency, production yield, and particle size of itraconazole microsponge were affected by drug to polymer ratio, the volume of internal phase containing methylene chloride, stirring rate and the concentration of PVA used. Also, the results showed that the dissolution rate of itraconazole from the microsponges was affected by drug to polymer ratio. In other words, the release rate of itraconazole from microsponges was increased from at least 27.43% to 64.72% after 2 h. The kinetics of dissolution mechanism showed that the dissolution data followed Korsmeyer-Peppas model. Therefore, these results suggest that microsponge system can be useful for the oral delivery of itraconazole by manipulating the release profile.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.7
• /
• pp.1939-1943
• /
• 2014

Solid dispersion (SD) system of everolimus (EVR) with Gelucire 50/13 (Stearoyl polyoxyl-32 glycerides) was prepared using melt granulation technique with the aim of improving the physicochemical properties and dissolution rate. The solid state characterization using scanning electron microscopy and X-ray powder diffraction, indicated that the drug was homogeneously distributed in the surfactant carrier in a stable amorphous form. The dissolution rate of EVR from the optimized SD composed of the drug, Gelucire 50/13 and microcrystalline cellulose in a weight ratio of 1:5:10, was markedly rapid and higher than that from the drug powder and the market product (Afinitor$^{(R)}$, Novartis Pharmaceuticals) in all dissolution mediums tested from pH 3.0 to pH 6.8. The results of this study suggest that formulation of SD with Gelucire 50/13 using melt granulation procedure may be a simple and promising approach for improving the dissolution rate and oral absorption of the anti-cancer agent without the need for using an organic solvent.

• YAKHAK HOEJI
• /
• v.34 no.3
• /
• pp.155-160
• /
• 1990

An oral adhesive tablet of acyclorir [9-(2-hydroxyethoxymethyl) guanine] for herpetic stomatitis was prepared and its physical properties were evaluated. 300 mg weighed tablets containing 30 mg of acyclovir were prepared with six kinds of polymers from direct compression, and the stickiness, fracture resistance and dissolution in pH 6.8 buffer solution were tested. HPMC and MC showed good stickiness and fracture resistance, and their dissolution rates were significantly different from each other. Three factors-HPMC:MC ratio, acyclovir content, compression force-were chosen as an important factor of manufacture and factorial analyses for these three factors were carried out. Eight kinds of formulations from different combination of three factors were prepared and tested in stickiness, fracture resistance and dissolution in pH 6.8 buffer solution. Dissolution rate was significantly affected by polymer ratio, fracture resistance was affected by compression force, and stickiness was not significantly affected by acyclovir content and polymer ratio.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.1
• /
• pp.23-28
• /
• 1996

The dissolution characteristics of DDB were markedly enhanced by preparing solid dispersions of drug with polyethylene glycol 6000. Solid dispersions of various weight fraction were formed by a melting method. And various tablets$(A{\sim}E)$ were prepared from these solid dispersions with excipients (lactose, com starch, Avicel and PVP) by wet granulation method. There were no significant differences in dissolution rates between physical mixture and DDB alone. But dissolution rates of solid dispersions were $1.4{\sim}2.0$ times greater than that of DDB alone and $1.2{\sim}1.8$ times greater than those of a commercial tablet.

• Journal of Pharmaceutical Investigation
• /
• v.13 no.3
• /
• pp.89-99
• /
• 1983

Nylon microcapsules containing acetaminophen could be obtained by interfacial polymerization between sebacoyl chloride and 1, 6-hexamethylenediamine. Methylcellulose affected the micromeritic properties and dissolution characteristics of microcapsules. The particle size distribution was affected by the stirring speed and viscosity grade of methylcellulose. The surface observed by the scanning electron microscopy was affected by the methylcellulose. Nylon microcapsules produced in above method containing acetaminophen exhibited the retarded dissolution in comparison with uncoated acetaminophen. Release of acetaminophen from microcapsules decreased with decreasing pH of medium and with increasing the viscosity grade of methylcellulose and stirring speed.