• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.1
• /
• pp.112-118
• /
• 2004

Recently, as the percentage of women employment has been growing, the demand for various facilities and services regarding household duties and infant rearing is increasing and so do the amount of the disposable diaper used. Among the components of disposable diaper, the top sheet contacting with infant skin directly is usually made with nonwoven textiles. Therefore, the mechanical and surface characteristics of the nonwovens used in disposable diaper are important for the skin health of infants. In this study, we have explored the mechanical and surface properties, such as friction coefficient, fluid permeability and strength, of the nonwovens used for disposable diaper top sheet and observed the variation of their properties with abrasion cycles. Nonwoven materials examined in this study are 100% cotton spunlace, 100% tencel spunlace, 100% polypropylene (PP) thermal bonding and 100% PP air through (Thru-air bonded carded web). From the result of KES-F analysis, we've found that 100% PP air through type nonwoven had a low friction coefficient and showed a little change in surface properties as increasing abrasion cycles. Moreover, it revealed superior fluid permeability and quick-drying character. On the other hand, though showing an excellent absorption force, the spun lace type nonwoven made of 100% cotton and 100% tencel displayed relatively low abrasion strength especially in wetting condition.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.4
• /
• pp.66-75
• /
• 2015

Disposable diaper waste is consisted of plastic, fiber, and SAP (Super Absorbent Polymer). They are valuable to be used as raw materials of other products including plastic blocks and pulp mold. Nevertheless, disposable diaper waste have been disposed by landfill and incineration without recycling. Due to strict environmental regulations it is necessary to develop fractionation technique to recycle the disposable diaper waste. In this study the fractionation technique using pilot-scale stock preparation units was investigated. Process for separation of plastic and fibers from disposable diaper waste was composed by the combination of pilot-scale pulper, drum screen, screen and cleaner. Recovery rate of plastics and fiber was checked according to the various operating conditions. In drum screen, recovery rate of plastic was high when the cut size of disposable diaper waste was $5cm{\times}5cm$. The highest recovery rate of fiber was achieved with 0.3 mm slot screen. It is important to control the neutral state of SAP for improvement of recovery rate of fiber since SAP can be swelled easily in water. Therefore SAP can be controlled efficiently by the addition of calcium chloride into the pulper. Consequently recovery rates of plastics and fibers were over 90 and 80% under the optimum pilot operating conditions.

• Journal of Fashion Business
• /
• v.15 no.2
• /
• pp.107-119
• /
• 2011

The rate of disposable diaper usage has been increased continuously from convenience of disposable diapers and increment of women's entry in workforce. However, a new perspective toward disposable diapers has been come to the fore in various sides like babies' health, environment, and cost. Furthermore, cloth diaper has started to attract more attention. Since parents and grandparents pay more attention to children as birth rate dropped, they tend to purchase expensive goods if the quality or design of the goods is worthy enough. Therefore, this study has the purpose in presenting the basic data for developing functional and pleasant cloth diaper with analyzing the consuming patterns (convergence in nature, health and technology) and cloth diaper characteristics. The research on the actual condition about children cloth diapers and environmental-friendly materials is as follows. Firstly, as a result of analyzing pros and cons about disposable diapers and cloth diapers, the cloth diapers are estimated to have better health, environment, and cost factors than disposable diapers, only excluding convenience. Secondly, as a result of examining patent registered diapers, the disposable diapers have been improved from shape-centered development to well-being material development, and the cloth diapers have mainly developed functional shape-centered. Thirdly, as a result of analyzing children's goods made with environmental-friendly materials, the children's clothes already use organics and natural resources like beans, bamboo trees, ginkgo, and chitosan. Recently, the diaper industry starts to pay attention to environmental-friendly because the skin ailment from environmental pollution has been an issue. To conclude, children's cloth diaper should be appropriate to their body shape and optimized to have convenient form and functional materials. If environmental-friendly materials are used, quality, functionality, various demands from customers and vitalization of goods industry will be all satisfied.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.2
• /
• pp.1-8
• /
• 2015

Disposable diaper has been used in order to handle urine and feces conveniently. At present the amount of disposable diaper waste increases gradually. Incineration and landfill have been the only ways to dispose of disposable diapers. However, if they are disposed by landfill, decomposition will take more than one hundred years. In addition, another way of dispose incineration has caused air pollution. Therefore, it is necessary to study recycling process for disposable diaper since plastic and wood fibers of diaper are useful materials to recycle. In this study, pulping condition of disposable diaper waste was studied in order to effectively separate the components. Recovery rates of plastic and fibers were analyzed under different pulping conditions. It was found that optimum pulping consistency was 5%, time was 60 minutes, temperature was $50^{\circ}C$, and cut size is $21cm{\times}21cm$. The recovery rate of plastic and fibers can be achieved above 70% under the optimum pulping condition.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.4
• /
• pp.499-509
• /
• 1999

This study was carried out to investigate the effects of wearing disposable diaper with the endothermic agent on thermoregulatory response of infant. Five healthy female infants aged about 5 months were taken as a subject of this experiment. Experimental diapers were six kinds of disposable diaper constructed of nonwoven tissue, fluff pulp, super absorbent polymer, back sheet film, leg elastic, and 0g urea(A) 1g urea(B) , 2g urea(C), 3g urea (D), 4g urea(E) 5g, urea(F) respectively. Urea(98% or over purity) was used as an endothermic agent. Experiment was proceeded while infants were sleeping at 27.5$\pm$0.5$^{\circ}C$, 50$\pm$5% R.H, 0.04m/sec. Each disposable diaper's properties was tested. During the experiment rectal temperature skin temperature of 9 areas temperature inside the disposable diapers were measured, the results were as follows : 1) There was not significant difference among the diapers in absorption capacity retention capacity and rewet(p=0.05). The absorption under load was showed to A, B,

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.6
• /
• pp.814-824
• /
• 2005

This study analyzed and standardized the harmful substances of organic compounds(dioxins) in disposable diapers for infant's clothing. Commercial samples obtained from Korea, Japan, America and German were determined by HRGC/HRMS. Experimental Methods were consisted of comparision of extracting solvent, analysis of PCDD/Fs, and analysis of PCDD/Fs of extraction in disposable diaper. The results were as follows. No high TEQ values in TCDD(1), PCDD(0.5) and HxCDD(0.1) were found for commercial disposable diapers from country Korea, Japan, U.S.A and German. In extraction for 6hrs experiments, HpCDD and OCDD were detected in disposable diapers of U1, U2 and G2, respectively. In extraction fur 24hrs experiments, HpCDD, OCDD and OCDF were detected in disposable diapers of J3, U1, U2 and U3. So we need to set standards of measurement for harmful materials contained in textile goods. This will make a safe and comfortable clothing environment for all users, regardless of age.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.1
• /
• pp.165-171
• /
• 2004

The analytical method of toxic heavy metals in disposable diapers was developed. Disposable diapers obtained from Korea, Japan, America and German were determinated and quantified. Sample treatment (Total Digestion) was wet chemical acid digestion for extraction of nine hazardous inorganic elements (Sb, As, Pb, Cd, Cr, Co, Cu, Ni, Hg) in disposable diapers. Inductively Coupled Plasma Mass Spectrometer (ICP-MS) and Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES) have been used for analyzing nine hazardous inorganic elements. The results were as follows : The concentration of extractable Sb which was treated for 3 hours with artificial urine and disposable diapers was higher than those of 6 hours and 24 hours. The concentration of extractable Cr was same as Sb. On the other hands, the behavior of Cu and Ni were different from Sb and Cr. Concentrations of extractable Cu and Ni increased as increasing the reaction time between artificial urine and disposable diapers.

• Journal of the Korean Home Economics Association
• /
• v.38 no.12
• /
• pp.73-84
• /
• 2000

This article is a continuing report about a development of disposable diapers for the elderly in need. In previous report, the first prototypes of disposable diapers in two different categories have been developed. One was a panty type and the other was a pad type. These prototypes were results of property test and wear test of existing disposable diapers in each categories. Yet, in order to develop useable products, the second property and wear tests using the first prototype diapers were carried out. Considering the resets of the second tests, enhancements to the first prototypes were made to refine the second prototypes. The panty type diaper were altered to be longer to prevent evacuation from leaking and fit better. The pad type diapers were altered to reduce thickness for comfort and wearing appearance when get dressed. Ultimately a lot more disposable diapers will be required in future. Resulting suggestions are as follows. Anthropometric data around hip area of elderly in both sexes have to be collected to give meaningful information to diaper manufacturers, so that they can manufacture for different sizes and different sexes. Also we suggests that diapers for specific disease such as diabetics have to be designed accordingly.

• Resources Recycling
• /
• v.24 no.1
• /
• pp.43-50
• /
• 2015

An extensive literature survey and personal communication with relevant experts made it possible to understand economic and technical feasibility of disposable diaper recycling. Commercial level of soiled diaper recycling technology is currently available from a Dutch company, Knowaste Co., who owns a proprietary separation technology of the pulps, plastics and super absorbing polymer (SAP). In Korea, on the other hand, pre-consumer diaper recycling technology without material separation at its infancy converts manufacturing scraps into refuse plastic fuel (RPF), container/truck cargo boards or automobile boards/sheets. Although previous studies on feasibility of post-consumer recycling in Korea showed mutually contradictory implication, it was found out in this research that significantly positive economic feasibility can be obtained with pre-consumer diaper recycling. Subsequent recycling R&D including pre-consumer scrap and policy support may expedite 'Establishment of Sustainable Society.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.3_4
• /
• pp.491-498
• /
• 2004

Among the components of disposable diaper, the top sheet contacting with baby skin directly is usually made of nonwoven fabrics. Therefore, the tactile properties of the nonwoven fabrics are important for the skin health of infants. In this study, we have explored the surface properties of hygiene nonwoven fabrics (100% cotton spunlace, 100% tencel spunlace, 100% polypropylene (PP) thermalbonding and 100% PP Thru-air bonded carded web (TABCW)), such as friction coefficient and geometrical roughness. used by KES-F system and a laser displacement sensor. Also, we evaluated the subjective responses about the hygiene nonwoven fabrics used by a questionnaire and compared with the objective values, measured by KES-F system and a laser displacement sensor respectively. From the result, we have found that surface sensation (such as soft, smooth, and rough) and bulkiness sensation (such as spongy and fluffy) of nonwovens were represented excellently by L-SMD values which are measured by a laser displacement sensor.