The ATE driver to test a high speed semiconductor chip is designed by using general logic drivers instead of dedicated pin drivers. We have proposed a structure of general logic drivers using FPCA and assured its correct operation by EDA tool simulation. PCB circuit was implemented and Altera FPGA chip was programmed using DDR I/O library. On the PCB, it is necessary to place two resistors connected output drivers near to the output pin to adjust an impedance matching. We confirmed that the measured results agree with the simulated values within 5% errors at room temperature for the input signals with 800Mbps data transfer rate and 1.8V operating voltage.
본 논문에서는 PMOLED(passive matrix organic light emitting diodes) 데이터 구동회로의 전류 편차를 보상하는 새로운 구조의 회로를 제안한다. 일반적인 PMOLED 데이터 구동 회로의 경우 MOS(metal oxide semiconductor) 공정 변화에 의해서 발생하는 데이터 구동 회로 출력단의 전류 편차는 보상 할 수 없으나, 제안된 데이터 구동회로는 출력단의 전류 편차를 보상하여 균일한 값의 전류를 OLED 패널(panel)에 인가 할 수 있다. 제안하는 회로는 종래의 데이터 출력 회로에 스위칭 트랜지스터를 추가하여 데이터 출력 전류용 회로를 공통 연결선에 연결함으로써 공정 변화에 의한 출력 전류의 편차를 최소화 할 수 있다. 제안한 회로는 $128(RGB){\times}128$의 해상도를 지원하는 PMOLED 패널을 기준으로 설계 하였고, 구동 회로 개발에 이용된 공정은 0.35um이다. 실험 결과 제안한 데이터 구동회로의 출력 전류는 1%대의 오차를 갖는 반면, 종래의 데이터 구동회로의 경우 출력 전류는 9% 대로 심한 변화를 나타내었다. 본 논문에서 제안한 PMOLED 데이터 구동회로를 이용할 경우 고화질의 OLED 디스플레이 구현이 가능하여 고 품위의 디스플레이 특성을 요구하는 휴대용 디스플레이 기기에 적용 할 수 있다.
한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
/
pp.409-412
/
2007
A lot of research for system-on-panel(SOP) have been done to integrate display systems including data driver, gate driver, timing controller, DC-DC converter, and smart functions such as embedded touch screen, ambient brightness sensing and luminance control, finger printing on the glass. Recently, the cost of an one-chip driver IC with various functions has decreased rapidly, and new mobile display interface technologies have been introduced. So it is necessary to examine the feasibility of SOP for practical mobile applications. In this paper, we will re-examine LTPS technologies for mobile displays in terms of various aspects and discuss the practical limitations on SOP technology and future technology trend of mobile displays.
한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
/
pp.1029-1032
/
2005
A 262K-color QVGA LTPS AMLCD was developed. This panel has integrated gate driver and data multiplexer (1:3) by p_Si LTPS TFT process. The commercialized driver IC was adopted to implement this display. Fine image quality, low powerconsumption and cost-efficiency feature make the panel be suitable for mobile application.
본 논문에서는 적색, 녹색, 청색의 세 가지 고휘도 LED를 하나의 소켓에 설치하여, 하나의 화소체 단위를 만들고, 이 화소체들의 조합과 다수 모듈들의 조합으로 문자, 그래픽, 동영상 등의 다양한 영상을 표출할 수 있는 풀컬러 전광판 모듈 및 제어장치를 개발하였다. LED 전광판 드라이버 모듈은 일정한 단위 면적에 RGB 픽셀을 조합한 도트에 드라이버 회로가 내장된다. 기존의 이러한 모듈형태는 특정 공간 및 설치 공간에 고정된 해상도를 구현하므로 가격이 높게 책정될 수 있다. 이러한 단점을 극복하기 위하여 임의의 피치 간격으로 배열이 자유로운 LED 드라이버 및 이에 따른 LED 픽셀 모듈을 개발하였다. 본 논문의 전광판 모듈은 기존 각각의 LED 모듈을 구동함에 있어서 병렬 방식의 데이터 처리 방식을 픽셀을 기준으로 그 위의 서브 모듈과 그 상위에 마스터 모듈의 개념을 도입하고 각각의 화소를 직병렬 통신 방식으로 개선함으로 인해서 처리할 수 있는 데이터의 속도를 초당 36프레임 이상으로 끌어올려서 상대적으로 데이터의 처리량이 많은 동화상의 경우에도 원활한 디스플레이를 할 수 있도록 하였다. 또한 기존 전광판의 깜박거림 현상이 개선되어 보다 선명한 영상이 제공되는 효과도 있다.
한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
/
pp.1398-1400
/
2005
A novel data driver for passive matrix organic lightemitting devices (PM-OLEDs) with high gray scale images was designed. The proposed circuit consisted of a main current bias circuit as well as sample & hold circuits in each channel of the data driver to compensate a current offset. These results indicate that a data driver designed by using the current offset compensation technique holds promise for poten tial applications in PM-OLED displays with high gray scale images.
출력 장치로 널리 이용되는 LCD(Liquid Crystal Display)는 CRT(Cathod-ray tube)에 비해 그 반응 속도가 느린 단점을 가진다. 이러한 단점으로 인해 시간방향으로 급격한 밝기 변화가 발생하는 영상에서 출력되는 영상이 흐려지는 문제점을 가진다. 반응 속도의 문제점을 극복하기 위해 LCD에서는 오버드라이빙 기술을 TCON에 적용하여 사용하고 있다. 이러한 오버드라이빙을 위해서는 화면에 출력된 이전 영상에 대한 정보를 압축 저장해야 한다. 기존의 8bit HD급을 위한 TCON에서는 TCON의 칩면적과 실시간성을 고려하여 AM-BTC(Absolute Moment Block Truncation Coding)기법을 적용하여 이러한 목적을 달성하고 있다. 하지만 최근에 많은 수요가 예상되는 10 bit Full HD급 대형 LCD에서는 기존에 비교하여 영상 데이터의 양이 많기 때문에 기존의 방법이 적합하지 않다. 기존의 방법을 10 bit Full HD급 대형 LCD에 적용하면 TCON의 칩면적의 증가로 인한 비용이 발생하거나, 화질의 열화를 야기하는 문제점이 있다. 본 논문에서는 이러한 문제점을 개선하기 위해 샘플 블록 내의 형태학적 정보에 적응적인 이원적 구조를 가지는 Dual BTC기법을 제안한다. 실험을 통해 제안된 Dual BTC기법이 기존의 AM-BTC기법 보다 정량적 측면과 정성적 측면에서 성능이 우수함을 확인하였다.
Maeyaert, Stefaan;Bakeroot, Benoit;Doutreloigne, Jan;Monte, Ann;Bauwens, Pieter;Calster, Andre Van
한국정보디스플레이학회:학술대회논문집
/
한국정보디스플레이학회 2008년도 International Meeting on Information Display
/
pp.692-695
/
2008
Large area emissive displays have problems with nonuniform pixel characteristics and their individual ageing. A pixel integrated driver with pixel based optical feedback is presented to solve these problems. Photodetectors, optical feedback circuit and data handling capabilities are integrated in a high voltage CMOS technology.
한국정보디스플레이학회 2002년도 International Meeting on Information Display
/
pp.567-570
/
2002
The LVDS (Low Voltage Differential Signaling) I/O cells, fully compatible with ANSI TIA/ EIA-644 LVDS standard, are designed using a 0.35${\mu}m$ standard CMOS technology. With a single 3V supply, the core cells operate at 1.34Gbps and power consumption of the output driver and the input receiver is 10. 5mW and 4.2mW, respectively. In the output driver, we employ the DCMFB (Dynamic Common-Mode FeedBack) circuit which can control the DC offset voltage of differential output signals. The SPICE simulation result of the proposed output driver shows that the variation of the DC offset voltage is 15.6% within a permissible range. In the input receiver, the proposed dual input stage with a positive feedback latch covers rail-to-rail input common-mode range and enables a high-speed, low-power operation. 5-channels of the proposed LVDS I/O pair can handle display data up to 8-bit gray scale and UXGA resolution.
본 논문에서는 고전압에서 동작하는 DDIC(display driver IC) 칩의 정전기 보호소자로 사용되는 GG_EDNMOS 소자의 고전류 특성 및 더블 스냅백 메커니즘이 분석되었다. 이온주입 조건을 달리하는 매트릭스 조합에 의한 수차례의 2차원 시뮬레이션 및 TLP 특성 데이타를 비교한 결과, BJT 트리거링 후에 더블 스냅백 현상이 나타났으나 웰(well) 및 드리프트(drift) 이온주입 조건을 적절히 조절함으로써 안정적인 ESD 보호성능을 얻을 수 있었다. 즉, 최적의 백그라운드 캐리어 밀도를 얻는 것이 고전압 동작용 정전기보호소자의 고전류 특성에 매우 중요한 영향을 주는 임계인자(critical factor)임을 알 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.