• 펄프종이기술
• /
• 제38권4호
• /
• pp.41-46
• /
• 2006

Printed mottle of coated paper is one of the most common but the most difficult problem in offset printing. Printed mottle is caused by an uneven penetration of Ink into the paper, binder migration, etc. For a high quality printing, development of new paper coating technologies to prevent print mottle is required. So for, the study of solving printed mottle is coated paper absorption controlled by base paper sizing and coating layer binder migration control. As a results, printed mottle has improved in coated paper. But printing is worked by interaction of printing ink, coated paper and printing pressure, then we need to understand of interaction printing work and coated paper. This research focused on a way of improving printed mottle by investigating various printing conditions such as ink dispersion, nip condition and amount of ink transfer using IGT printability tester.

• 대한치과보철학회지
• /
• 제43권1호
• /
• pp.61-77
• /
• 2005

Statement of problem. The implant prosthesis has been utilized in various clinical cases thanks to its increase in scientific effective application. The relevant implant therapy should have the high success rate in osseointegration, and the implant prosthesis should last for a long period of time without failure. Resorption of the peri-implant alveolar bone is the most frequent and serious problem in implant prosthesis. Excessive concentration of stress from the occlusal force and biopressure around the implant has been known to be the main cause of the bone destruction. Therefore, to decide the location and angulation of the implant is one of the major considering factors for the stress around the implant fixture to be dispersed in the limit of bio-capacity of load support for the successful and long-lasting clinical result. Yet, the detailed mechanism of this phenomenon is not well understood. To some extent, this is related to the paucity of basic science research. Purpose. The purpose of this study is to perform the stress analysis of the implant prosthesis in the partially edentulous mandible according to the different nature locations and angulations using three dimensional finite element method. Material and methods, Three 3.75mm standard implants were placed in the area of first and second bicuspids, and first molar in the mandible Thereafter, implant prostheses were fabricated using UCLA abutments. Five experimental groups were designed as follows : 1) straight placement of three implants, 2) 5$^{\circ}$ buccal and lingual angulation of straightly aligned three implants, 3) 10$^{\circ}$ buccal and lingual angulation of straightly aligned three implants. 4) lingual offset placement of three implants, and 5) buccal offset placement of three implants. Average occlusal force with a variation of perpendicular and 30$^{\circ}$ angulation was applied on the buccal cusp of each implant prosthesis, followed by the measurement of alteration and amount of stress on each configurational implant part and peri-implant bio-structures. The results of this study are extracted from the comparison between the distribution of Von mises stress and the maximum Von mises stress using three dimensional finite element stress analysis for each experimental group. Conclusion. The conclusions were as follows : 1. Providing angulations of the fixture did not help in stress dispersion in the restoration of partially edentulous mandible. 2. It is beneficial to place the fixture in a straight vertical direction, since bio-pressure in the peri-implant bone increases when the fixture is implanted in an angle. 3. It is important to select an appropriate prosthodontic material that prevents fractures, since the bio-pressure is concentrated on the prosthodontic structures when the fixture is implanted in an angle. 4. Offset placement of the fixtures is effective in stress dispersion in the restoration of partially edentulous mandible.

• 한국항행학회논문지
• /
• 제11권4호
• /
• pp.437-446
• /
• 2007

$16{\times}40$ Gb/s WDM 전송 시스템에서 비트 에러율 (BER ; bit error rate)의 효과적 보상과 융통적 WDM 전송 시스템의 설계를 위한 광 위상 공액기 (OPC ; optical phase conjugator)의 최적 위치 값과 광섬유 구간의 최적 분산 계수 값들을 10 dB와 20 dB의 소광비(ER ; extinction ratio)에 따라 도출하였다. 모든 WDM 채널들의 BER의 효과적 보상을 위한 최적 파라미터 값들은 기존 연구들에서 살펴보았던 변조 파형 형식, 전송 채널수와 마찬가지로 신호의 소광비에 의존하는 것을 확인하였다. 그리고 최적 파라미터 값들을 이용한 융통적인 WDM 시스템 설계가 ER이 10 dB인 경우보다 ER이 20 dB인 경우가 더욱 유리한 것을 확인하였다.

• 한국군사과학기술학회지
• /
• 제13권5호
• /
• pp.717-724
• /
• 2010

The initial trajectory of a spheroid configuration bobbin for precision guidance has been investigated by analyzing its aerodynamic load and six-degree-of-freedom motion. The effects of changes in the spheroidal head configuration, flow angle and lateral center-of-gravity offset are numerically studied using the commercial software "FLUENT". A wind tunnel test is also conducted to validate the numerical scheme and to examine effect of the Reynolds number on the flow around the bobbin. It is shown that the size of the separation bubble formed on the surface decreases significantly when the Reynolds number is varied between 110,000 and 140,000. At a zero flow angle, an oblate spheroidal head shows relatively moderate rotation while a prolate spheroidal head shows rapid rotation. The bobbin with a spherical head shape has little effect on the flow direction; however, the oblate bobbin is sensitive to the flow angle. The roll motion of the bobbin is greatly influenced by the lateral center-of-gravity offset and maximum dispersion is observed at half of the radius.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 춘계학술발표논문집
• /
• pp.152-157
• /
• 2006

Printing mottle of coated paper is one of the most common and the most difficult problems in offset printing. For a high quality printing, development of new paper coating technologies to prevent print mottle is required. This research focused on improvement of printing mottle. Effects of base paper properties, coating color composition and printing conditions such as printing pressure and printing speed on printing mottle were investigated with RI tester and IGT tester.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.698-700
• /
• 2003

LGP (Light-Guide Panel) of TFT-LCD Backligh/Frontlight is one of the major components which affect on the product quality of LCD. Since the brightness distribution of LGP is sensitive to the process error in manufacturing, the optical characteristics such as reflection and absorption of LGP pattern should be modeled including the process error. LGP is developed by using the fast and reliable design technology, which uses the concept of the inverse-design, makes the model on the characteristics of uncertainty in the manufacturing process, and designs the dispersion pattern analytically without try-and-error by using an artificial intelligence. The PEA(Process-Error-Adaptive) design gives the best solution in handling the process error. The offset of target in feedback system makes such the best pattern design possible that the brightness distribution is nearly same (more than 90%) with target in regardless of the miscellaneous errors in mass production. The present design method has been also applied to frontlight and multi-side-lamp(eg., four-side-four-lamp) backlight.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.495-497
• /
• 2006

Talc Printing mottle of coated paper is one of the most common and the most difficult problems in offset printing. For a high quality printing, development of new paper coating technologies to prevent print mottle is required. This research focused on improvement of printing mottle. Effects of ink dispersion and printing conditions such as nip conditions, printing pressure and printing speed on printing mottle were investigated with RI tester and IGT tester.

• 한국항행학회논문지
• /
• 제11권4호
• /
• pp.394-400
• /
• 2007

광 변조기에 의해 광 신호에 본질적으로 인가되어 전송 품질에 영향을 미치는 주파수 �V (frequency chirp)에 관계하여 광 위상 공액기 (OPC ; optical phase conjugator)의 최적 위치와 광섬유 구간의 최적 분산 계수를 도출하였다. 본 논문에서는 다양한 주파수 �V과 최적 파라미터의 관계를 살펴보고자 전송 성능 면에서 최악의 경우인 10 dB 소광비를 갖는 NRZ 형식의 40 Gbps ${\times}$ 16 채널 WDM 전송 시스템에서 음(negative 또는 down)의 �V, chirp-free, 양(positive 또는 up)의 �V을 모두 가정하였다. 주파수 �V 값이 커질수록 WDM 채널 신호들의 최적의 보상을 위한 OPC의 위치 오프셋이나 광섬유 구간의 분산 계수 오프셋을 크게 하여야 한다는 것을 확인하였다. 그리고 도출된 최적 값들의 효과는 초기 주파수 �V 값이 양인 WDM 채널의 보상에서보다 음인 WDM 채널의 보상에서 더욱 크다는 것을 확인하였다.

• 한국전자파학회논문지
• /
• 제20권10호
• /
• pp.1077-1083
• /
• 2009

MTI(Moving Target Indicator) 방식으로 구현된 레이더에 있어서 안테나 고속 회전시 발생되는 지형 특성에 따른 고정 클러터의 도플러 주파수 스펙트럼 확산 현상에 대해 신호 처리 파라메터값(MTI 필터 단수, M/N Detector 비율, CFAR(Constant False-Alarm Ratio)의 K-factor 및 offset값)을 조정하여 지형 클러터의 제거 능력을 최적화하였다. 최적화 구현은 지형 클러터의 유형별 데이터 수집을 위한 치구를 설계 및 활용하여 유형별 지형 클러터 데이터를 수집하였으며, 이의 유형별 분석 및 제거 능력 최적화를 위해 Matlab 시뮬레이션을 통하여 test case를 만들고, 레이더 실내 시험 및 지형별 야외 시험을 통한 반복 검증을 수행하여, 진화적 개발 모델과 같이 반복, 점진적인 과정으로 병행되는 최적화를 수행하였다. 연구 결과, 기존 레이더 시스템에 비해 7.5 dB(5.6배) 이상의 지형 클러터 제거 능력 향상 효과를 거두었다.

• 대한교통학회지
• /
• 제26권1호
• /
• pp.191-201
• /
• 2008

단속류의 교통시설 운영개선(TSM, Trasportation Systems Management)의 타당성 및 개선효과 분석을 위해 TRANSYT-7F(T7F)와 NETSIM이 많이 사용되고 있으나, T7F는 현실적인 차량군의 압축 분산효과가 미흡하고, NETSIM은 구축시간이 과다하게 소요되고, 용량설정의 어려움 등의 문제를 가지고 있다. 이에 반해, 충격파 모형은 T7F에 비해 차량군의 압축 분산을 더욱 사실적으로 묘사할 수 있으며, NETSIM에 비해서는 분석시간 단축, 적용용이성 등의 장점을 가지고 있어 우수하다. 하지만, 수리적 계산의 어려움으로 인해 비현실적인 교통류관계식(Q-K곡선) 적용, 단순한 차량군 적용 등의 문제점을 지니고 있다. 이러한 충격파이론을 이용한 기존 분석모형의 문제점을 해소하기 위해보다 현실적인 교통류관계식 적용, 새로운 차량군모형 개발, 연장충격파 개념 도입 등 새로운 분석모형을 개발하였으며, 개발모형의 유효성 검증을 위해 다양한 시나리오를 구성하여 T7F와 NETSIM과 비교 평가한 결과 우수한 성능을 보였다.