• 한국지형학회지
• /
• 제28권2호
• /
• pp.59-70
• /
• 2021

This study aims to determine the sunlight exposure according to depositional environment to improve the accuracy of optically simulated luminescence (OSL) dating. Sufficient sunlight exposure during transportation of sediment is a basic assumption of the OSL dating, and if the process does not occur enough, the results may be overestimated compared to the actual depositional age. Therefore, the main purpose of this study is to establish a correction method by determining residual or unbleachable dose after sunlight exposure in the actual deposition process, not in the laboratory measurement. Four samples from two sites were collected according to the depositional environment from rivers and coasts, and various OSL signals, including the size of residual dose, degree of dispersion between grains, and OSL signal sensitivity, were measured. As a result, it was confirmed that sediments formed under temporarily high energy environments, such as floods and surges, had relatively high residual dose or large dispersion of residual dose between particles. In further studies, the OSL signal characteristics of river sediments by flow velocity will be identified and the relationship between energy and OSL signal characteristics will be identified in more detail. Moreover, a method of reconstructing the paleo-environment at the time of deposition for existing sediments will be devised. It is expected to provide important information for the frequency of disaster recurrence and prediction of future climate change.

• 한국전자통신학회논문지
• /
• 제3권3호
• /
• pp.170-176
• /
• 2008

인터넷의 발달로 인해 국제간 대용량의 광신호를 장거리 전송하기 위해서는 DWDM 시스템의 성능향상이 필수적으로 요구된다. 전송 용량을 높이기 위해서는 전송 속도를 높이거나, 채널수를 늘려야 하며 이런 요구 조건을 충족시키기 위하여 라인 코딩, 변조기술, 최적화된 광섬유, 광대역 광증폭 기술, 분산보상 기술, 순방향 에러정정기술 등이 적용되고 있다. 특히, 순방향 에러정정기술은 고속 대용량 트래픽을 장거리 전송하기 위한 혁신적인 기술로 각광 받고 있다. 본 논문에서는 순방향 에러정정기술의 세대별 발전 현황과 코딩이득을 분석하여 상용 시스템에 구현하는 방법을 제시하였다.

• 대한원격탐사학회지
• /
• 제40권4호
• /
• pp.397-418
• /
• 2024

The Land Surface Temperature (LST) is a crucial parameter in identifying drought. It is essential to identify how LST can increase its accuracy, particularly in mountainous and hill areas. Increasing the LST accuracy can be achieved by applying early data processing in the correction phase, specifically in the context of topographic correction on the Lambertian model. Empirical evidence has demonstrated that this particular stage effectively enhances the process of identifying objects, especially within areas that lack direct illumination. Therefore, this research aims to examine the application of the Lambertian model in estimating LST using the Multi-Channel Method (MCM) across various physiographic regions. Lambertian model is a method that utilizes Lambertian reflectance and specifically addresses the radiance value obtained from Sun-Canopy-Sensor(SCS) and Cosine Correction measurements. Applying topographical adjustment to the LST outcome results in a notable augmentation in the dispersion of LST values. Nevertheless, the area physiography is also significant as the plains terrain tends to have an extreme LST value of ≥ 350 K. In mountainous and hilly terrains, the LST value often falls within the range of 310-325 K. The absence of topographic correction in LST results in varying values: 22 K for the plains area, 12-21 K for hilly and mountainous terrain, and 7-9 K for both plains and mountainous terrains. Furthermore, validation results indicate that employing the Lambertian model with SCS and Cosine Correction methods yields superior outcomes compared to processing without the Lambertian model, particularly in hilly and mountainous terrain. Conversely, in plain areas, the Lambertian model's application proves suboptimal. Additionally, the relationship between physiography and LST derived using the Lambertian model shows a high average R² value of 0.99. The lowest errors(K) and root mean square error values, approximately ±2 K and 0.54, respectively, were achieved using the Lambertian model with the SCS method. Based on the findings, this research concluded that the Lambertian model could increase LST values. These corrected values are often higher than the LST values obtained without the Lambertian model.

• 환경영향평가
• /
• 제12권4호
• /
• pp.245-257
• /
• 2003

$SO_2$ concentrations in the Seoul Metropolitan Area (SMA) were predicted by the regional segment ISCST3 modeling. The SMA was segmented by three modeling regions where the weather monitoring station exists since the area of the SMA, approximately $100km{\times}100km$, is too wide to be modeled by one modeling domain. The predicted concentrations by the model were compared with the measured concentrations at 39 air monitoring stations located in the SMA to validate the ISCST3 modeling coupled with the regional segment approach. The predicted concentrations by the regional segment method showed better performance in depicting the measurements than those by the non-segment ISCST3 modeling. The correction methods of the calculated concentrations reviewed were here the correlation method by the first order linear equation and the ratio method of observed to calculated concentrations. The corrected concentrations by two methods showed good agreement with the measured data. The ratio method was, however, easily applicable to the concentration correction in case of a wide modeling region considered in this study.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2923-2928
• /
• 2007

The study of model for velocity and turbulence within the urban canopy was carried out. To evaluate existing urban model we conducted wind tunnel experiment and large-eddy simulation (LES). Mean velocity profile and turbulence are measured within simple three different obstacle arrays. To obtain supplemental data and to verify morphological model large-eddy simulation was performed. Several methods have been used to achieve embodying the flow field in urban area. Recently, morphological method obtaining flow parameters from the statistical or physical representation of obstacle elements is a arising method. It was found that all morphological model, evaluated in this study, over predict the friction velocity, most sensitive one among the flow parameters. Velocity and turbulence in the urban canopy layer were improved by the correction using 'true' friction velocity.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.527-531
• /
• 2005

지진해일파는 풍파에 비해 파장이 매우 길어 장파로 간주되지만 조석에 비하면 파장이 짧아 상대적으로 분산성이 강하므로, 먼거리를 전파하는 경우에는 분산성을 고려하여 해석하여야 한다. 특히 동해에서 발생하는 지진해일의 경우 파원이 작고 수심이 깊어 단주기파 성분이 강하므로 그 물리적인 분산효과가 매우 중요하다. 이에 본 연구에서는 지진해일 수치모의시 임의로 구성된 유한요소망과 양해법을 사용하면서도 복잡한 Boussinesq 방정식 대신 간단한 Boussinesq-type의 파동방정식을 사용하면서도 물리적 분산효과를 정도 높게 고려할 수 있는 능동적인 분산보정기법을 이용한 2차원 유한요소모형을 개발하여 가상진원에 의해 발생된 2차원 지진해일 전파에 대하여 수치모의한 결과, 요소크기와 시간간격이 고정되었음에도 불구하고 다양한 수심에 대해 선형 Boussinesq 방정식의 해석해와 매우 잘 일치하는 좋은 결과를 보였다.

• Journal of Astronomy and Space Sciences
• /
• 제27권4호
• /
• pp.309-318
• /
• 2010

We introduce a technical approach for reducing three-dimensional infrared (IR) spectroscopic data generated by integral field spectroscopy or slit-scanning observations. The first part of data reduction using IRAF presents a guideline for processing spectral images from long-slit IR spectroscopy. Multichannel image reconstruction, Image Analysis and Display (MIRIAD) is used in the later part to construct and analyze the data cubes which contain spatial and kinematic information of the objects. This technic has been applied to a sample data set of diffuse 2.1218 ${\mu}m$ $H_2$ 1-0 S(1) emission features observed by slit-scanning around Sgr A East in the Galactic center. Details of image processing for the high-dispersion infrared data are described to suggest a sequence of contamination cleaning and distortion correction. Practical solutions for handling data cubes are presented for survey observations with various configurations of slit positioning.

• 천문학회보
• /
• 제43권1호
• /
• pp.50.1-50.1
• /
• 2018

We present the development of tools for Echelle spectrograph of NYSC 1-m telescope. The eShel spectrograph(Shelyak) has operated at Deokheung Optical Astronomy Observatory since 2016. We carried out test observation in 2016 and completed the preprocessing and wavelength calibration of the spectroscopic data using IRAF. Based on the reduction process in IRAF, PySpecW, a set of tools for spectroscopic data was developed in 2017. PySpecW was optimized for NYSC 1m telescope, and written in Python for youth to use easily on any OS. PySpecW consists of preprocessing, aperture tracing, aperture extraction, wavelength calibration, and dispersion correction for extracted spectra.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.576-580
• /
• 2007

수치기법이 복잡한 Boussinesq 방정식 대신 간단한 선형 Boussinesq 형태의 파동방정식을 지배방정식으로 사용하면서도 완변수심상 지진해일 전파시 요구되는 물리적 분산효과를 정도 높게 고려할 수 있는 분산보정 지진해일 전파 유한요소모형을 개발하였다. 수심이 변하는 지형에서의 분산보정능력을 검증하기 위해 수중 원형천퇴상을 전파하는 Gaussian 형상의 가상지진에 대해 수치모의를 수행하고, 그 결과를 선형 Boussinesq 방정식에 의해 계산된 수치해와 비교하였다. 그 결과 개발된 유한요소모형이 수심이 변하는 지형에서도 상당히 정확하다는 것이 입증되었다.

• Advances in nano research
• /
• 제8권4호
• /
• pp.283-292
• /
• 2020

In the present research, differential quadrature (DQ) method has been utilized for investigating free vibrations of porous functionally graded (FG) micro/nano beams in thermal environments. The exact location of neutral axis in FG material has been assumed where the material properties are described via porosity-dependent power-law functions. A scale factor related to couple stresses has been employed for describing size effect. The formulation of scale-dependent beam has been presented based upon a refined beam theory needless of shear correction factors. The governing equations and the associated boundary conditions have been established via Hamilton's rule and then they are solved implementing DQ method. Several graphs are provided which emphasis on the role of porosity dispersion type, porosity volume, temperature variation, scale factor and FG material index on free vibrational behavior of small scale beams.