• Journal of Radiation Protection and Research
• /
• v.43 no.3
• /
• pp.124-129
• /
• 2018

Background: Effluent Concentration Limits (ECLs) were re-evaluated via direct calculation using dose coefficients based on radiation protection quantity introduced in Korea and the intrinsic breathing rates of Korean residents. Materials and Methods: The re-evaluated ECLs were compared with the domestic standards given in the Notice of the Nuclear Safety and Security Commission (NSSC), as well as with ECLs specified in the Code of Federal Regulations (CFR). Results and Discussion: The relative ratios of the re-evaluated ECLs to the currently applied domestic standards differed depending on the radionuclide type, but it was clearly shown that, for tritium ($^3H$) and radiocarbon ($^{14}C$), which significantly affect radiological dose to the public during the normal operation of nuclear power plants, the re-evaluated ECLs were higher than the domestic standards. This implies that Korean standards are relatively conservative. Conclusion: The re-evaluated results for each age group showed that $^{131}I$ (radioiodine), one of the significant radionuclides, had the lowest values, but nonetheless, the domestic standards for radioiodine were lower than the ECLs given in the CFR and the re-evaluated ECLs via a method given in the CFR.

• Journal of the Korean Society of Safety
• /
• v.15 no.4
• /
• pp.101-111
• /
• 2000

In order to introduce P.S.M. system adequate to domestic construction first, many cases similar to advanced foreign P.S.M. system have been collected and compared to the domestic situation. Then, the current safety management status of bridges, subways, apartment and office building construction are investigated while visiting interview, using questionnaire at site have being done. The potential hazard and measurement have been investigated for each kind of works, and the domestic introducing method of P.S.M. system is analyzed with expert discussion. In order to represent how to make out P.S.M. plan, the questionnaire is made out using each five place for bridge, subways, apartment and office building. As the weight factor for potential hazard of each work obtained from more than forty site places, is produced and shown. Also, a direction the recommendation is suggested to improve tool in each construction site with work schedule. It is thought that proposed schedule contributed to keeping in safe business administration of each company in decreasing many effort at the construction site.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.21-24
• /
• 2008

The present study numerically investigates the glottal airflow characteristics as well as acoustic features of phonation fully coupled with dynamic behavior of vocal folds. The vocal folds are described by a low-dimensional body-covered model characterized by bio-mechanical parameters such as glottal width, vocal folds stiffness, and subglottal pressure. The flow in the vocal tract is modeled as an incompressible, axisymmetric form of the Navier-Stokes equations (INS), while the acoustic field is predicted by the linearized perturbed compressible equations (LPCE). The computed result shows that a two-mass model of vocal folds is sufficient to reproduce temporal variations in oral airflow and glottis motion produced by female speakers. It is also found that i) the glottal width has a significant effect on the amplitude of glottal flow, and thus on the amplitude of acoustic wave in the vocal tract, ii) the vocal fold tension is the main control parameter for the fundamental frequency of phonation, iii) the subglottal pressure plays an appreciable role on reproduction of the self-sustained oscillation of vocal folds, and iv) the strength of pulsating airflow and vortical structures are primarily affected by glottal width and subglottal pressure, and are closely related to pitch, loudness, and voice quality. Finally, more comprehensive explanation about the difference between one- and two-mass models is presented with discussion of effectiveness of vocal folds oscillation and voice quality.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.4
• /
• pp.2337-2339
• /
• 2016

Electronic presentations have become useful tools for surgeons, other clinicians and patients, facilitating medical and legal support and scientific research. Microsoft(R) PowerPoint is by far and away the most commonly used computer-based presentation package. Setting up surgical clinical cases with PowerPoint makes it easy to register and follow patients for the purpose of discussion of treatment plan or scientific presentations. It facilitates communication between professionals, supervising clinical cases and teaching. It is ofter useful to create a template to standardize the presentation, offered by the software through the slide master. The purpose of this paper was to show a simple and practical method for creating a Microsoft(R) PowerPoint template for use in presentations comcerning oral and maxillofacial cancer.

• Journal of Computing Science and Engineering
• /
• v.2 no.4
• /
• pp.394-411
• /
• 2008

The data in automation and control systems can be achieved not only from different field devices but also from different OPC (OLE for Process Control) servers. However, current OPC clients can only read and decode the simple data from OPC servers. They will have some problems to acquire structured data and exchange the structured data. In addition to the large network control systems, the OPC clients can read, write, and subscribe to thousands of data points from/to OPC servers. Due to that, the most important factor for building a high performance and scalable industrial control system is the ability to transfer the process data between server and client in the most efficient and fastest way. In order to solve these problems, we propose a means to implement the OPC DA (Data Access) server supporting the OPC complex data, so that the OPC DA clients are able to read and decode any type of data from OPC servers. We also propose a method for caching the process data in large industrial control systems to overcome the limitation of performance of the pure OPC DA system. The performance analysis and discussion indicate that the proposed system has an acceptable performance and is feasible in order for applying to real-time industrial systems today.

• Proceedings of the Korean Society for Cognitive Science Conference
• /
• 2010.05a
• /
• pp.48-54
• /
• 2010

INTRODUCTION Interaction between temporal events at the millisecond level is important for visual and tactile interaction. OBJECT The aim of the present study is to identify any neural signature, as reflected in event-related potentials (ERP), for the integrative processes when the two sensory modalities are stimulated in synchrony as opposed to when they are stimulated separately. METHOD The basic strategy was to compare ERP signals obtained with simultaneous visual and tactile stimulation with a linear summation of ERP patterns obtained with each modality stimulated separately. Condition were presented, paired with various stimulus-onset-asynchronies (SOA) ranging from - 300 ms (tactile-first) to 300 ms (visual-first), and in trials where only one modality was stimulated alone. RESULT A positive deviation was located in observed ERP at C4 electrode (contralateral to the stimulated hand) at 200-400 ms, in comparison to the predicted ERP. The deviation was present at all SOAs other than -300ms (tactile-first) and 300 ms (visual-first). There was also a positive deviation at occipital leads at the 50-ms SOA (visual-first) trials. DISCUSSION It suggested that neural signatures of cross-modal integration occur within a limited time-window. The deviations were specifically localized at the contralateral somatosensory and visual cortices, indicating that the integration happens at or before the level of the primary cortices.

• Journal of Korean Academy of Nursing Administration
• /
• v.15 no.3
• /
• pp.305-313
• /
• 2009

Purpose: This study was done to identify the current status of burnout research on Korean nurses and to suggest the directions for future research. Method: Fifty two articles between 1998 and 2007 were selected using the key words such as "Nurse" and "Burnout" from the database (RISS4U et al.). Results: 77.9% of studies were master's theses unpublished in the nursing journals. All studies were cross-sectional and therefore did not allow casual inference. Hospital nurses were the most common subjects (21 studies). The most frequently used burnout measurement instrument was the Burnout Measure, while the Maslach Burnout Inventory was used in only 6 studies. 55.7% of studies reported the average burnout score as higher than the middle level. Among individual factors, variables significantly correlated to burnout were age, position, work experience, coping, and personality. Some of job factors including shift work, workloads, job stress, and organizational commitment were also significantly related to burnout. There was very little discussion about the influence of organizational factors analyzed by unit or institution level. Conclusion: In Korea, the next phase of nurse burnout research needs to consider the measurement tool selection for the international comparison and longitudinal design to find more specific causal relationships.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.11a
• /
• pp.91-95
• /
• 2003

There is a problem to be solved for improvement of durability and safety supervision. When you do the waterproofing and anticorrosive work of main concrete from the design stage, the material and method of construction need to be correctly applied to appropriate circumstance conditions. Epoxy have mostly been used for concrete water tank structure. Lately, lots of subjects on adaption of polyurea resin waterproofing and anticorrosive are under discussion. Then, we attempt to approach by evaluating and comparing every capabilities with another waterproofs in this study. Performance evaluation items include the adherence performance, the imprint of seal performance, temperature dependence performance, promotion weatherizing ability, inner chemical performance, drinking water eruptive performance. Through the experiment analysis, we found that the polyurea resin waterproofing membrane is dominantly superior to other waterproofs. According to this study, we suggest the polyurea resin waterproofing membrane as a new waterproofing material for concrete structure.

• Asian Journal of Business Environment
• /
• v.7 no.4
• /
• pp.27-33
• /
• 2017

Purpose - The paper aims to explore the critical and uncover issues encountered to the supply-chain companies in launching halal based services in India. Research design, data, and methodology - After a meticulous review of relevant literature on the halal concept and halal logistics, researchers involved in a data collection by conducting semi-structured focus group interviews. Four groups with a maximum of 5 members each have chosen from the areas of transportation, warehousing, certification, and packaging. A total of 20 questionnaires were collected by applying purposive sampling method. Results - More than 95 percent of the chosen focus groups agreed that they know only about halal but don't have any exposure to halal logistics. The discussion has revealed that the adoption rate for halal transportation, warehousing, halal certification, and packaging is almost zero. The respondents were chosen only from transportation, warehousing, certification and packaging companies from south India which are operating throughout India. This research never attempts to be acquainted with the opinions of channel members who directly or indirectly involved in meeting customer demands. Conclusions - This is a ground-breaking effort aimed to study the critical issues related to Indian halal logistics which is beneficial to both logistic companies as well as to the academic world.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.799-805
• /
• 1996

In many cases, the magnetic farce model is linearized at the origin in designing the controller of a magnetic bearing system. However. this linear assumption is violated by the unmodeled nonlinear effect such as sensor dislocation and backup bearing dislocation. Therefore, a direct probe into the nonlinear magnetic force model in an active magnetic bearing system is necessary. To analyze the nonlinear magnetic force model of a magnetic bearing system, phase plot analysis which is to plot the numerical solution of the nonlinear equation in several initial points in the interested region is applied. Phase plot analysis is used to observe a nonlinear dynamic system qualitatively (not quantitatively). With this method, we can get much useful information of the nonlinear system. Among this information, a bifurcation graph that represents stability and locations of fixed points is essential. From the bifurcation graph, a stability criterion of magnetic bearing system is derived.